Abstract:In this work, molecular dynamics simulation and linear elastic fracture mechanics were employed to analyze the crack-tip behavior of a Mode I crack in nanocrystalline titanium. The effects of crystalline orientation, twin boundary and stacking fault on crack propagation were taken into account. Simulation results demonstrate that the crack-tip behavior and thus the crack propagation mode strongly depend on crystalline orientations and plane defects. Cracks lying on the hexagonal close-packed basal plane, the prismatic plane, or along a stacking fault plane defect propagate in a brittle manner, without involving proper dislocation emissions and twin nucleations in the crack-tip vicinity. In contrast, cracks show a ductile propagation behavior when aligned along the pyramidal plane, the {10 (1) over tilde2} plane, or the {10 (1) over bar2} <(1) over bar 011 > twin boundary. For these cases, local crack-tip plasticity and crack-tip reconstructions are found to play significant roles. The impact of strain rate on the crack-tip behavior of a basal crack was also investigated in detail. Five strain rates varied between 10(9) s(-1) and 10(10) s(-1) were considered. With increased strain rates, a brittle-to-ductile transition was clearly observed for crack propagation. The desired transition can be attributed to the high stress and energy concentrations near the crack-tip under elevated strain rates, leading to the successive emission and propagation of partial dislocations. To verify and validate the simulation results, a theoretical analysis on the competition between brittle and ductile crack propagations was also implemented. The theoretical predictions based on the linear elastic fracture mechanics were found to reasonably agree with the simulation results. The observations and conclusions deduced from the combined modeling and theoretical study are helpful to the better understanding of fracture mechanics in nanocrystalline titanium.

Fracture Behavior of Precracked Nanocrystalline Materials with Grain Size Gradients

Diffusive crack-grain interplay in freestanding nanocrystalline silver thin film

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

Grain-Size Dependent Thermal, Electrical And Mechanical Properties Of Bulk Nanocrystalline Materials

Effects of Crystalline Orientation, Twin Boundary and Stacking Fault on the Crack-Tip Behavior of a Mode I Crack in Nanocrystalline Titanium

Phase-field-crystal Simulation of Nano-Single Crystal Microcrack Propagation under Different Orientation Angles

Significantly Enhanced Crack Blunting by Nanograin Rotation in Nanocrystalline Materials

Atomistic Scale Behaviors of Crack Propagation in Nanocrystalline Bcc Iron

Numerical Study of Fracture Behavior of Gradient Nano-Grained Metals by Molecular Dynamics Simulations

Crack Growth Versus Blunting in Nanocrystalline Metals with Extremely Small Grain Size

Crack propagation in gradient nano-grained metals with extremely small grain size based on molecular dynamic simulations

Phase Field Crystal Simulation of Microscopic Deformation Mechanism of Reverse Hall-Petch Effect in Nanocrystalline Materials

A Molecular Dynamics Simulation of Fracture in Nanocrystalline Copper

Nanoscale rotational deformation effect on dislocation emission from an elliptically blunted crack tip in nanocrystalline materials

Intragranular and Intergranular Crack Propagation in Nanocrystalline Ni Under Single-Cycle Mode I Loading

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

Brittle versus ductile transition of nanocrystalline metals

Nanomechanics and Nanocomposites: Mechanical Behaviors

Enhanced Ductility of Nanomaterials Through Cooperative Dislocation Emission from Cracks and Grain Boundaries

Simulation of Fracture of Nanocrystalline Metals

Inter- And Intra-Agglomerate Fracture In Nanocrystalline Nickel