Abstract:Fresnel reflectivity suppression using random nano-structured surfaces (rARSS) has been investigated by numerous groups in recent years. A variety of measurement methods are used, from simple specular reflection to directional transmission and combinations thereof. In most cases, there is the assumption that the incident irradiance is only divided between specular reflection (R) and on-axis transmission (T), ignoring wavelength-dependent bidirectional scatter radiance distributions that attenuate both on-axis intensities. Broadband spectroscopic measurements over limited surface areas are common, assuming that there is good structure uniformity across the optical surfaces under test. Process development of rARSS requires repetitive functional testing and measurement, which at times is a result of intrusive techniques, such as electron microscopy of sample crossections, albeit in limited surface areas. We explored a double amplitude-division interferometric non-invasive technique, based on a Fabry-Perot etalon/Michelson interferometer (FPE/MI) combined instrument, to extract the absolute specular reflectance and on-axis transmission of single optical surfaces in the midwave to longwave infrared (2.0-12 μm), without sacrificing the samples. The technique was applied to before-and-after rARSS addition on infrared transmissive silicon, gallium arsenide, and germanium windows. The entire FPE/MI test system losses were taken into account, which can be considerable due to differences on sample setup conditions. We determined the interference ordinal-area of the FPE resonances within the MI scanning sub-bands, and extracted single surface values for R and T, which agree with independent spectroscopic measurements. The technique can be applied to large surface areas, limited only by the size of the MI aperture.

Refined Procedure for Gain Measurement in Fabry-Perot Semiconductor Lasers

Small angle measurement method based on the total internal multi-reflection

Measurement of Optical Gain and Optical Internal Loss in GaN-based Laser

Note: an in Situ Method for Measuring the Non-Linear Response of a Fabry-Perot Cavity.

Analysis and Design of Combined Distributed-Feedback/fabry-perot Structures for Surface-Emitting Semiconductor Lasers

Novel Method of Fabricating Fabry-Perot Cavity Employing MEMS Wet-Etching Process

Fabrication and Analysis of a Fabry-Perot Cavity with a Micromechanical Wet-Etching Process.

On the measurement technique of fiber single pass gain of small signal with unitary light beam

Gain Lifetime Characterization Through Time-Resolved Stimulated Emission in a Whispering-Gallery Mode Microresonator

Measurement of Ultra-Low Losses in Optical Supercavity

Finesse measurement for high-power optical enhancement cavity

1045 nm purely gain coupled semiconductor laser based on periodic electric injection

Optical surface absolute specular reflectance measurement using an infrared etalon and interferometer combination method

Study of Gain-Coupled Distributed Feedback Laser Based on High Order Surface Gain-Coupled Gratings

Fabry–Pérot based short pulsed laser linewidth measurement with enhanced spectral resolution

Efficient postprocessing technique for fabricating surface nanoscale axial photonics microresonators with subangstrom precision by femtosecond laser

Realistic loss estimation due to the mirror surfaces in a 10 meters-long high finesse Fabry-Perot filter-cavity.

A Novel Method for Eliminating Chirp and Compressing Pulses from Gain-Switched Distributed-Feedback Bragg Semiconductor Laser

Laser diode self-injection locking to an integrated high-Q Fabry-Pérot microresonator

Instrumentation and Measurement Systems: Practical Nuances of Laser Diode Characterization: A Methods Article

Interferometric Differential High-Frequency Lock-In Probe for Laser-Induced Vacuum Birefringence