Abstract:Combining porous media paved on sidewall and microencapsulated phase change material (MPCM) suspension as coolant is presented in double-layered microchannel heat sink (MCHS), in which more surface area of porous copper matrix with high thermal conductivity as well as greater temperature difference between the heating wall and working fluid during phase transition of MPCM will enhance heat transfer. The Forchheimer-BrinkmanDarcy model together with energy equation in local thermal equilibrium are employed to deal with fluid flow and heat transfer in porous ribs, and the equivalent heat capacity method is used to describe the phase change process of microcapsules under laminar flow. The influences of coolants, heat sink designs (including the thickness, height, porosity and pore size of porous medium as well as channel number) and working conditions (involving inlet velocity, heat flux and suspension concentration) on thermal and hydraulic characteristics are numerically investigated. The performance evaluation factor (PEF) is introduced to evaluate the comprehensive thermal-hydraulic performance of double-layered MCHS, and the effective performance evaluation factor (PEFeff) is used to compare the overall performance of porous-wall MCHS between conventional arrangements, different channel aspect ratio and channel height ratio configurations. The thickness and height of porous media paved on sidewall should be adjusted reasonably, especially for the arrangement of non-equal porous media, to obtain better overall performance. Different from the variable porosity configuration, the double-layered MCHS cannot rely on losing part of flow performance to obtain better thermal performance in smaller pore size mode, so a larger pore size can be selected to obtain better thermal-hydraulic performance according to actual working conditions. The PEF at larger flow velocity decreases due to higher pressure drop exceeding the benefit of more convection on heat transfer enhancement, in which case the phase change effect in porous-wall mode with MPCM suspension as coolant is suppressed and higher viscosity amplifies the effect of frictional resistance, resulting in a greater drop ratio of PEF than water. The greater PEF in porous-wall MCHS with suspension concentration increasing from 3% to 20% arises than that in non-porous mode, due to the larger surface area of copper matrix with high thermal conductivity and more MPCM particles available for phase transition. The larger aspect ratio configuration can achieve greater PEFeff rise and better overall performance by optimizing fluid velocity in the current mode due to greater thermal resistance drop and less pressure drop rise at lower flow rates, but the variable height ratio structure makes the comprehensive performance of porous-wall MCHS inferior to conventional arrangement due to larger pressure drop rise outweighing the benefits of heat transfer enhancement at the same total volume flux.

Performance Evaluation of Multi-Layered Porous-Medium Micro Heat Exchangers with Effects of Slip Condition and Thermal Non-Equilibrium

Thermal–hydraulic Performance of Small Scale Micro-Channel and Porous-Media Heat-Exchangers

Convective Heat Transfer in a Porous-Medium Micro-Annulus with Effects of the Boundary Slip and the Heat-Flux Asymmetry: an Exact Solution

Consideration of Heat Transfer Enhancement Mechanism Using Nano- and Micro-Scale Porous Layer

A Hybrid Numerical Methodology Based on CFD and Porous Medium for Thermal Performance Evaluation of Gas to Gas Micro Heat Exchanger

Heat Transfer Enhancement for Porous Microchannel Heat Sinks by Optimizing Wall Heat Flux Distribution

Numerical and thermal resistance analysis on the cryogenic porous medium heat exchanger with liquid channel

Consideration of Heat Transfer Enhancement Mechanism of Nano- and Micro-Scale Porous Layer Via Flow Visualization

Thermal transport in microchannels partially filled with micro-porous media involving flow inertia, flow/thermal slips, thermal non-equilibrium and thermal asymmetry

Presence of a porous medium and the arrangements effects on the performance of an air-cooled heat exchanger: an experimental study for heat transfer and pressure drop

Simultaneously developing flow and heat transfer in circular and parallel-plates microchannels with velocity slip and temperature jump

Experimental Research on Micro Heat Exchangers

Numerical simulation on the forced convection heat transfer of porous medium for turbine engine heat exchanger applications

Thermo-hydraulic analysis in double-layered microchannels with porous rib and phase change microcapsules slurry as coolant

Effect of Porous Substrates on Thermohydraulic Performance Enhancement of Double Layer Microchannel Heat Sinks

Thermal Performance of Double-Layer Porous-Microchannel with Phase Change Slurry

Analysis of microchannel heat sinks for electronics cooling

Transient thermal analysis of the coupled radiative and convective heat transfer in a porous filled tube exchanger at high temperatures

Thermal Performance of Crossflow Microchannel Heat Exchangers

Thermo‐hydraulic analysis of wavy microchannel heat sinks with porous fins based on field synergy principle

Design and Analysis on a Microchannel Heat Exchanger