Abstract:In micro heat exchangers, due to the presence of distributing and collecting manifolds as well as hundreds of parallel microchannels, a complete conjugate heat transfer analysis requires a large amount of computational power. Therefore in this study, a novel methodology is developed to model the microchannels as a porous medium where a compressible gas is used as a working fluid. With the help of such a reduced model, a detailed flow analysis through individual microchannels can be avoided by studying the device as a whole at a considerably less computational cost. A micro heat exchanger with 133 parallel microchannels (average hydraulic diameter of 200 μ m) in both cocurrent and counterflow configurations is investigated in the current study. Hot and cold streams are separated by a stainless-steel partition foil having a thickness of 100 μ m. Microchannels have a rectangular cross section of 200 μ m × 200 μ m with a wall thickness of 100 μ m in between. As a first step, a numerical study for conjugate heat transfer analysis of microchannels only, without distributing and collecting manifolds is performed. Mass flow inside hot and cold fluid domains is increased such that inlet Reynolds number for both domains remains within the laminar regime. Inertial and viscous coefficients extracted from this study are then utilized to model pressure and temperature trends within the porous medium model. To cater for the density dependence of inertial and viscous coefficients due to the compressible nature of gas flow in microchannels, a modified formulation of Darcy-Forschheimer law is adopted. A complete model of a double layer micro heat exchanger with collecting and distributing manifolds where microchannels are modeled as the porous medium is finally developed and used to estimate the overall heat exchanger effectiveness of the investigated micro heat exchanger. A comparison of computational results using proposed hybrid methodology with previously published experimental results of the same micro heat exchanger showed that adopted methodology can predict the heat exchanger effectiveness within the experimental uncertainty for both cocurrent and counterflow configurations.

Thermal Performance of Crossflow Microchannel Heat Exchangers

Testing and Design of a Microchannel Heat Exchanger with Multiple Plates

Thermal–hydraulic Performance of Small Scale Micro-Channel and Porous-Media Heat-Exchangers

An In-Depth Comparison of Straight and Wavy Microchannel Heat Exchangers

Numerical study of microchamber and cylindrical inserts on enhancement of heat transfer in microchannel heat exchanger

Experimental Research on Micro Heat Exchangers

Enhancement in thermo hydraulic performance of radially curved microchannel with secondary flow

Experimental Investigation on Thermal Performance of Gas-To-Gas Micro Heat Exchanger with Three Flow Arrangements

Numerical study of thermal-hydraulic performance enhancement in a shell-and-tube milli-reactor

Hydraulic and Thermal Design of a Gas Microchannel Heat Exchanger

Experiments of Condensation Heat Transfer in Micro Channel Heat Exchanger

A Hybrid Numerical Methodology Based on CFD and Porous Medium for Thermal Performance Evaluation of Gas to Gas Micro Heat Exchanger

Experimental study of thermal-hydraulic performance of a printed circuit heat exchanger with straight channels

HEAT TRANSFER CHARACTERISTICS OF WATER FLOWING THROUGH MICROCHANNELS

A comparative study of enhanced thermal performance in Tesla-type microchannels

Numerical study of different micro-channel structures on fluid flow and heat transfer performance

Heat Transfer and Fluid Flow Characteristics of Microchannel with Discrete Double Inclined Ribs on Sidewalls

Heat Transfer Performance Study of Fluid Rotating Microchannel Heat Sink

Multi-effect Evaluation of Cooling Heat Transfer Performance for Supercritical CO2 Flowing in Micro-Channel

Experimental and Numerical Studies of Fluid Flow Confined in Microchannel

Thermo‐hydraulic analysis of wavy microchannel heat sinks with porous fins based on field synergy principle