Abstract:This paper describes the design, assembly, and implementation of a hand-held, magnetic-field-based sensor system that can be adapted for a variety of sensing applications. The miniaturized system is based on the Chemical Identification by Magneto-Elastic Sensing (ChIMES) technology, which uses three concentric solenoid coils to wirelessly interrogate a sensor body comprised of a response material coupled to a magnetoelastic wire. The response material expands when it encounters a target, imposing mechanical stress on the wire and altering its magnetic permeability. The sensor bodies are passive, requiring no external power source, and they are small, measuring about 15 mm in length and 0.3 mm in diameter. Up to four sensor bodies can be configured as an evenly spaced linear array. The sensor system operates by applying a low-frequency, current-stabilized, filtered triangle wave to a uniform-density excitation coil to switch the magnetic domains within the wire. The responses from the sensors are picked up by a detection coil as stress-induced changes in the Faraday voltage, and the strong magnetic field induced by the excitation coil in the detection coil is nullified by a cancellation coil reverse-wound in series with the detection coil. The responses of the sensors in an array are separated in time by a linear gradient DC biasing coil. The sensors can be interrogated through metallic and nonmetallic barriers. The signals from the detection coil and the excitation coil are digitized by a pair of bipolar analog-to-digital converters. A Raspberry Pi single-board computer and associated software performs data acquisition and controls all aspects of the sensor system hardware. The program allows the user to select the number of sensors in the array, the type of signal that is being collected, and the number of samples to take. The program also allows for signal processing of the sensor data, such as baseline correction. The program can differentiate sensor peaks from each other and calculate the magnitude of each sensor response with less than 1% error. The data is then displayed along with a graph of the signal.

A Highly Integratable Microfluidic Biosensing Chip Based on Magnetoelastic-Sensor and Planar Coil

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

Research of Integrated Cellular Chip Based on Microfabrication

The Research on Integrated Cellular Chip Based on Multifunction Cell-based Biosensor

Integrated Cell-Based Biosensor for Extracellular Electrophysiological Monitoring

Magnetoelastic-Sensor Integrated Microfluidic Chip for the Measurement of Blood Plasma Viscosity

Magnetic Nanochain Integrated Microfluidic Biochips

A Pulsed Wave Excitation System to Characterize Micron-Scale Magnetoelastic Biosensors

Magnetostrictive Microcantilever As Micro-Biosensor Platform

Design of a Microfluidic Millimeter Wave Chip for Magnetic Beads Based Biosensing

An Oscillator-Based CMOS Magnetosensitive Microarray Biochip with On-Chip Inductor Optimization Methodology

An Interrogating Circuit and Device for Magnetostrictive Biosensors

Miniaturized Magnetoelastic Sensor System

Integrated electrochemical sensor based on electrowetting-on-dielectric microfluidic chip

Novel Magnetostrictive Microcantilever and Magnetostrictive Nanobars for High Performance Biological Detection

Resonance behavior of magnetostrictive micro/milli-cantilever and its application as a biosensor

Biosensor Based on Magnetostrictive Microcantilever

A Fully Integrated Biosensing Platform Combining Acoustofluidics and Electromagnetic Metamaterials

An LC Wireless Microfluidic Sensor Based on Low Temperature Co-Fired Ceramic (LTCC) Technology

High Throughput Pathogen Screening For Food Safety Using Magnetoelastic Biosensors

Magnetostrictive Microcantilever as an Advanced Transducer for Biosensors