Abstract:Controlled release of active chlorine into the water system through membrane bound disinfectant, prevention of biofilm formation at the membrane surface and killing of antibiotic resistant bacteria were the study objectives that were accomplished in presented work. Cyclic amines/amides/imides are effective precursor of N-halogenated amines/amides/imides. Such N-halogenated compounds are found to be effective against antibiotic resistant bacteria such as, E. coli and S. aureus. Henceforth cyanuric acid and 5,5-dimethyl hydantoin were selected as representative precursor of such amide/imides that could be halogenated and provide antimicrobial performance. The polymer PES was introduced with side chain of primary amine. Further this primary amine was converted to secondary amine with novel modification containing cyanuric chloride. It was further modified to cyanuric acid as a desired precursor of N-halamide/imide. The PES-modified -cyanuric acid (PESmCA) was characterized using IR, NMR, XRD and SEM. While two novel monomers containing hydantoin as a branch extending from the ethyl group chain; belonging to norbornene dicarboximide and oxonorbornene dicarboximide, were successfully synthesize and characterized using IR, NMR and HRMS techniques. Further these monomers were polymerized via ring opening metathesis polymerization reaction into novel polymers of P(NDH) and P(ONDH). The polymer’s olefinic bonds were saturated to s-P(NDH) and s-P(ONDH). The unsaturated and saturated polymers were characterized through IR, NMR, and SLS techniques. The saturated polymers and the modified PES were fabricated into membranes and characterized via SEM and contact angle measurement. The membrane performance tests were conducted using pure water permeance and BSA protein rejection tests. The membranes were chlorinated and rinsed to remove adsorbed active chlorine. The rinsed membranes were characterized with IR providing respective N-Cl peak in range of 721-719 cm-1. The unwanted chlorine release into the water assembly was not observed provided that the respective polymers had covalently stable cyclic N-Cl moieties. Membranes were challenged against 106CFU/ml of bacteria (E.coli and S.aureus) in static agar test and dead end filtration tests. The membranes provided 100% inhibition of bacteria E. coli and S. aureus upon surface contact in agar plate test. The respective membranes were also suitable for dead end filtration pressure assisted bacterial flow test. The test provided 99-100 % kill of both bacteria. These N-halamide/imide novel polymer and modified polymer systems were efficiently chlorinated through repeated cycles. Keywords: Modified PES, norbornene polymers, oxonorbornene polymers, ROMP, controlled release of active chlorine, biofilm prevention, inhibition of antibiotic resistant bacteria, phase inversion, UF membranes.

Preparation and Characterization of an Antibacterial Ultrafiltration Membrane with N-chloramine Functional Groups.

Fabrication and performance of a new type of charged nanofiltration membrane based on polyelectrolyte complex

Preparation and Performance of Quaternary Ammonium Salt-Containing Methacrylate Copolymer-Based Ultrafiltration Membranes

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Polypeptide modified polyelectrolyte-based membrane with excellent antimicrobial property and permeability via brush assisted assembly and chlorination treatment

Pre-treatment for Ultrafiltration: Effect of Pre-Chlorination on Membrane Fouling

Preparation and Characterization of Quaternized Poly(phthalazinone Ether Sulfone Ketone) NF Membranes

Preparation of a novel positively charged nanofiltration composite membrane incorporated with silver nanoparticles for pharmaceuticals and personal care product rejection and antibacterial properties.

A Chlorine-Tolerant Nanofiltration Membrane Prepared by the Mixed Diamine Monomers of Pip and Bhttm

Preparation, characterization and antibacterial properties of cellulose membrane containing N-halamine

A novel chlorine-resistant polyacrylate nanofiltration membrane constructed from oligomeric phenolic resin

Further understanding NaClO cleaning of bacteria-fouled ultrafiltration membrane: Variation of membrane structure and formation of halogenated by-products

Chlorine Rechargeable Biocidal N -Halamine Nanofibrous Membranes Incorporated with Bifunctional Zwitterionic Polymers for Efficient Water Disinfection Applications

Nanofiltration Membrane Achieving Dual Resistance to Fouling and Chlorine for "green" Separation of Antibiotics

Preparation and Characterization of Antibacterial Cellulose/Chitosan Nanofiltration Membranes

In Situ Preparation of Chlorine-Regenerable Antimicrobial Polymer Molecular Sieve Membranes

Highly efficient capture of E. coli using amidoximated polyacrylonitrile nanofiber membrane immobilized with reactive green 19 dye/polyhexamethylene biguanide: Antibacterial and cytotoxicity studies

High-strength hydrophilic N-halamines chitosan and cellulose nanofibers membranes with repeated bactericidal properties

A novel loose nanofiltration membrane with superior anti-biofouling performance prepared from zwitterion-grafted chitosan

Synthesis and fabrication of ultrafiltration membranes from homo and blend polymers of novel combination of cyclic amides/ imides to norbornene/ oxonorbornene; shift from classic oligomers to high performing polymer materials.

Improvement of the Separation and Antibiological Fouling Performance Using Layer-by-layer Self-Assembled Nanofiltration Membranes