Abstract:A nanofibrous polyimide (PI) framework‐derived composite electrolyte with a thickness of 17.5 μm is fabricated to ensure good mechanical and electrochemical performances. With the composite electrolyte, the dendrite‐free and favorable cycling performance could be realized and acceptable electrochemical performance is effectuated in LiNi0.5Co0.2Mn0.3O2 (NCM523) solid battery via in situ formation of LiF, N‐species containing electrode/electrolyte interphase. Polyethylene oxide (PEO) based polymer electrolytes show promise in expanding the practical applications of lithium (Li) batteries. However, their applications in Li batteries are usually restricted owing to the lack of mechanical strength, poor oxidative stability, and relatively large thickness. Herein, a nanofibrous polyimide (PI) framework enhanced plasticized‐PEO solid electrolyte is prepared to realize good mechanical and electrochemical performances. Following the configuration with the PI matrix, this "polymer in polymer" composite electrolyte with a thickness of 17.5 μm exhibits enhanced mechanical strength (13.9 MPa) and outstanding thermal stability. Additionally, it preserves the high ionic conductivity (2.25 × 10−4 S cm−1, 25 °C). The Li||Li symmetrical battery with the modified electrolyte could achieve a steady Li plating/stripping of more than 500 h, and the critical current density reaches up to 0.6 mA cm−2 at ambient temperature. The LiFePO4 batteries delivery favorable capacity of 132.2 mAh g−1 with capacity retentions of 96.4% and 85.9% after 500 and 1000 cycles at 1 C, respectively. Acceptable cycling performance also could be achieved in LiNi0.5Co0.2Mn0.3O2 solid batteries via an inorganic‐rich artificial cathode electrolyte interphase.

Aqueous Lithium-Ion Batteries Using Polyimide-Activated Carbon Composites Anode and Spinel LiMn2O4 Cathode

TiP2O7 and Expanded Graphite Nanocomposite as Anode Material for Aqueous Lithium-Ion Batteries

Design and Synthesis of Graphene/sno2/polyacrylamide Nanocomposites As Anode Material for Lithium-Ion Batteries

Thin Solid Polymer Electrolyte with High‐Strength and Thermal‐Resistant via Incorporating Nanofibrous Polyimide Framework for Stable Lithium Batteries

Controllable Synthesis of a Monophase Nickel Phosphide/Carbon (ni5p4/c) Composite Electrode Via Wet‐Chemistry and a Solid‐State Reaction for the Anode in Lithium Secondary Batteries

Heterogeneous Synthesis and Electrochemical Performance of LiMnPO4/C Composites As Cathode Materials of Lithium Ion Batteries

Fabrication of SiOx-G/PAA-PANi/Graphene Composite With Special Cross-Doped Conductive Hydrogels as Anode Materials for Lithium Ion Batteries

Toward Greener Lithium-Ion Batteries: Aqueous Binder-Based LiNi0.4Co0.2Mn0.4O2 Cathode Material with Superior Electrochemical Performance

A Ternary Polyaniline/Active Carbon/Lithium Iron Phosphate Composite as Cathode Material for Lithium Ion Battery.

High Capacity and Rate Performance of LiNi0.5Co0.2Mn0.3O2composite Cathode for Bulk-Type All-Solid-state Lithium Battery

High Performance TiP 2 O 7 Nanoporous Microsphere As Anode Material for Aqueous Lithium-Ion Batteries

Multi-effect anthraquinone-based polyimide enclosed SnO2/reduced graphene oxide composite as high-performance anode for lithium-ion battery

Lithiated Hybrid Polymer/Inorganic PAA/MnO2 Protection Layer for High-Performance Tin Oxide Alloy Anode

Lithiated Hybrid Polymer/Inorganic PAA/MnO 2 Protection Layer for High-Performance Tin Oxide Alloy Anode

A High-Efficient Stable Surface-Prelithiated Li1.2ni0.13co0.13mn0.54o2 Cathode Enabled by Sacrificial Lithium Nitrides for High-Energy-Density Lithium-Ion Batteries

In Situ One-Step Synthesis of a Ge/Zn2GeO4/N-Doped Carbon Composite As an Anode Material for Lithium-Ion Batteries

A Superb 3D Composite Lithium Metal Anode Prepared by In-Situ Lithiation of Sulfurized Polyacrylonitrile

NaTi2(PO4)3 Nanoparticles Embedded in Carbon Matrix as Long-Lived Anode for Aqueous Lithium Ion Battery

Aqueous Lithium-Ion Battery Liti2(Po4)(3)/Limn2o4 with High Power and Energy Densities As Well As Superior Cycling Stability

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

A Novel UV-Cured Semi-IPN Structure PEO@Nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries