Abstract:Olivine-type LiMPO4 (M = Fe, Mn, Co, Ni) has become of great interest as cathodes for next-generation high-power lithium-ion batteries. LiMnPO4, possessing a moderate working voltage compatible to the present electrolyte systems, can provide a higher energy density than LiFePO4 on account of its higher redox potential of Mn3+/Mn2+ (4.1 V) than Fe3+/Fe2+ (3.5 V). However, the electrochemical performance of LiMnPO4 is poor due to the slow lithium diffusion kinetics within the grains and the low intrinsic electronic conductivity, even much worse than those of LiFePO4. Up to now, low electronic conductivity can be successfully overcome by modifying the LiMnPO4 particles with carbon and minimizing particle size. The mesoporous and hollow sphere structure can further improve the electrochemical performance of olivine-type LiMnPO4 material. Here, we synthesized the mesoporous hollow sphere LiMn0.8Fe0.2PO4/C composite by a solvothermal method using spherical Li3PO4 as the precursor. The small crystalline size of (~50 nm) LiMn0.8Fe0.2PO4 can reduce the diffusion length for lithium ion transport leading to the enhanced rate capability. The mesoporous and hollow sphere structure offers high surface area, which can enhance the electrochemical performance of LiMn0.8Fe0.2PO4/C composite as show in Figure 1. The material exhibits an ultra-long cycle life exceeding 1000 cycles with an extremely low capacity decay of 0.0068 mAh·g-1 loss per cycle, which is the best cycling performance to our knowledge. The results exhibit that the mesoporous hollow sphere LiMn0.8Fe0.2PO4/C composite is a promising cathode material for lithium ion batteries. Figure 1

Aqueous Lithium-Ion Battery Liti2(Po4)(3)/Limn2o4 with High Power and Energy Densities As Well As Superior Cycling Stability

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

High-Entropy Laminates with High Ion Conductivities for High-Power All-Solid-State Lithium Metal Batteries.

High Performance TiP 2 O 7 Nanoporous Microsphere As Anode Material for Aqueous Lithium-Ion Batteries

Aqueous Rechargeable Li+/Na+Hybrid Ion Battery with High Energy Density and Long Cycle Life

Nanostructured LiTi2(PO4)3 Anode with Superior Lithium and Sodium Storage Capability Aqueous Electrolytes

TiP2O7 and Expanded Graphite Nanocomposite as Anode Material for Aqueous Lithium-Ion Batteries

Aqueous Lithium-Ion Batteries Using Polyimide-Activated Carbon Composites Anode and Spinel LiMn2O4 Cathode

A High Rate and Long Cycling Performance NaTi2(PO4)3 Core–Shell Porous Nanosphere Anode for Aqueous Sodium‐Ion Batteries

Nanoparticles-Assembly Of Limn2o4 Hollow Microspheres With Improved Rate Capability And Cycleability For Lithium Ion Batteries

NaTi2(PO4)3 Nanoparticles Embedded in Carbon Matrix as Long-Lived Anode for Aqueous Lithium Ion Battery

A High-Efficient Stable Surface-Prelithiated Li1.2ni0.13co0.13mn0.54o2 Cathode Enabled by Sacrificial Lithium Nitrides for High-Energy-Density Lithium-Ion Batteries

Advanced Aqueous Rechargeable Lithium Battery Using Nanoparticulate LiTi 2 (PO 4 ) 3 /C As a Superior Anode

Advanced High-Voltage Aqueous Lithium-Ion Battery Enabled by "Water-in-Bisalt" Electrolyte.

Microsphere LiMn0.6Fe0.4PO4/C Cathode with Unique Rod-Like Secondary Architecture for High Energy Lithium Ion Batteries

Regulation of Molecular Microheterogeneity in Electrolytes Enables Ampere-Hour-Level Aqueous LiMn2O4||Li4Ti5O12 Pouch Cells

Porous Insulating Matrix for Lithium Metal Anode with Long Cycling Stability and High Power

High Performance Iron-Doped LiMnPO4 Cathode Material for Lithium-Ion Batteries

Tape-Cast Water-Stable Nasicon-Type High Lithium Ion Conducting Solid Electrolyte Films for Aqueous Lithium-Air Batteries

Advanced Liti2(Po4)(3)@N-Doped Carbon Anode for Aqueous Lithium Ion Batteries

Copolymerization- Assisted Preparation of Porous Limn2o4 Hollow Microspheres As High Power Cathode of Lithium-Ion Batteries