Abstract:In the scheme of radial smoothing based on the optical Kerr effect,pump laser pulse train uses optical Kerr effect of nonlinearity medium to add periodical spherical phase modulation,which makes the speckle inside the focal spot of the laser beam in far field sweep periodically at radial direction,and the uniformity of the focal spot in far field is improved.To analyze the influence of temporal characteristics change of the pump laser on beam smoothing effect,a theoretical model of the radial smoothing scheme has been established,and the time characteristic parameters of the pump laser has been analyzed and optimized.The results indicate that,for the given delay time between pump photon pulses,the sub-pulse with either too large or too small pulse width will reduce the irradiation uniformity of laser beam in far field.Meanwhile,with the increase of the pulse width of sub-pulse,the volatility of irradiation uniformity of laser beam in far field with integral time is trending toward stability relatively.Thus,the relatively large pulse width of the pump laser would be beneficial to obtain a more stable smoothing effect under the condition that the obvious beat wave effect should be avoided as far as possible.The time synchronous precision between the laser beam and the pump laser has a significant influence on the initial beam smoothing effect.For the pump laser of about one fifth period of the pulse train in advance,a better smoothing effect can be obtained in a relatively shorter integral time.In addition,for different temporal shapes of the pump laser,different smoothing effects can be achieved.When the temporal shape of the pump laser is triangular,the radial direction sweeping speed of the speckle inside the focal spot is relatively stable,and the radial smoothing effect and its stability can be improved effectively.

Parameters Optimization for Radial Smoothing Based on Optical Kerr Effect

Smoothing of Small On-Target Spots Produced by Frequency-Tripled Beams Using Lens Array and Spectral Dispersion

Uniform irradiation of adjustable target spots in high-power laser driver.

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Spatial-Temporal Distortions And Calibration Of Ultrashort Pulses In Complex Optical Systems

System Optimization of Radial Shearing Interferometer for Aspheric Testing

Ultrafast random polarization beam smoothing driven by rotating wavefront via optical Kerr effect

Laser Beam Smoothing by Rotating Random Phase Plate

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Theoretical Studies of High-Power Laser Beam Smoothing Via Stimulated Brillouin Scattering in Plasma

Parameter Optimization for Photonic Nanojet of Dielectric Microsphere

On the improvement of smoothing by spectral dispersion efficiency for laser–plasma interaction

Optimization of smoothing by spectral dispersion with a sinusoidal phase modulation

Optimization of morphological parameters for mitigation pits on rear KDP surface: experiments and numerical modeling.

Spatial Frequency Analysis of Beam Smoothing Performance Realized by the Diffractive Optical Element and the Smoothing by Spectral Dispersion Technique

Reduction of Pulse-to-pulse Fluctuation in Laser Pulse Energy Using the Optical Kerr Effect.

Optimization design of stable and high quality optical parametric chirped pulse amplification system

Research on Beam Smoothing Technology for High-Power Laser System

Parameter Optimization of Self-Reflecting All-Laser-driven Thomson Scattering Based on Laser Wakefield Acceleration

Beam Smoothing in the Time Domain by Using Air Turbulence to Disturb the Refractive Distribution

Ktp Optical Parametric Oscillator Pumped by the Laser with A Sbs Phase Conjugate Mirror