Abstract:We report on the influence of the dielectric/organic interface properties on the electrical characteristics of field-effect transistors based on Poly-phenylenevinylene derivatives. We observe a direct influence of the dielectric surface on the field-effect mobility as well as on the charge injection at the source electrode, despite the fact that we used a top contact transistor structure.We find that the presence of traps at the dielectric surface, decreases the hole mobility and increases the threshold voltages. By treating the silicon dioxide dielectric surface with gas phase molecules such as octadecyltrichlorosilane (OTS) and hexamethyldisilazane (HMDS) the hole mobility improves and the threshold voltage slightly increases.The effects of a dielectric polymer layer spin coated onto silicon dioxide substrates before deposition of the semiconductor polymer can be related to the density of the oxydryl groups (-OH), which are the most efficient traps for the charges flowing in the device. We use different polymer species such as polyvinylalchol (PVA), polymethylmetacrilate (PMMA) and a cyclotene derivative (B-staged bisbenzocyclobutene or BCB). The elimination of the -OH groups and of other traps, produces the same effect observed with HMDS coupled to a more pronounced enhancement of the threshold voltage, with the exception of PMMA. The electrical characteristics obtained with HMDS and PMMA polymer dielectrics are the highest reported to date for PPV-based field-effect transistors.We confirm that the purification of the active material is crucial to enhance the device performances and to achieve a better device to device reproducibility.We also investigated the effect of the dispersion of a phosphorescent dye into the active polymeric material. The electrical characteristics of OFETs with HMDS or PMMA dielectric with and without dye doping are compared.

Investigation of Surface Charge Distribution on Different Polymer Materials under AC Voltage

Surface Potential Decay on LDPE and Its Nanocomposites

Contact Electrification Polarity of Polyethylene Particles: A Morphology-Derived Anomalous Size Dependence

Charge Distribution on Polymer Insulator Surface under AC Voltage

Measurement Method and Accumulation Characteristics of Surface Charge Distribution on Polymeric Material under DC Voltage

Probing static discharge of polymer surfaces with nanoscale resolution

Quasi-Static AC Surface Charging of Polymeric Insulators At Low Pressure

POLARITY REVERSAL DISCHARGE ON POLYPROPYLENE SURFACE BY NANOSECOND PULSE DISCHARGE

Influence Of The Dielectric And Of The Active Layer Doping On The Fet Mobility In Ppv-Based Devices

Polarity reversal discharge on polypropylene surface applied with nanosecond pulses

Interfacial and Bulk Polarization of P(VDF-HFP) Investigated by Dielectric Spectroscopy

Study on the Effect of Electron/Hole Injection on the Energy-Storage Properties of Polymer Dielectrics

Interface Charge Characteristics in Polymer Dielectric Contacts: Analysis of Acoustic Approach and Probe Microscopy

Effects of Surface Topography and Morphology on Space Charge Packet in Polyethylene

Experimental Study of Accelerating Surface Charge Dissipation on Polymer Treated by Repetitively Pulsed Discharge Plasmas

Polarity Effect on Space Charge Distributions in Polymer Under DC Electric Field

FEM Simulation of Charge Accumulation Behaviours on Polyimide Surface in 10 kV Negative High-Voltage Corona Polarization Process

Transient Dynamics of Packet-Like Space Charge in Low-Density Polyethylene at High Temperatures

High-field dielectric property of PET film under AC ramp voltage application

Surface Microstructure Study on Corona Discharge-Treated Polyethylene Using Positron Annihilation Spectroscopy

Studies of the effect of temperature on charge accumulation in PVDF-PMMA double-layered thin films based on depolarization current measurements