Abstract:A miniaturised high‐isolation K‐/Ka‐band diplexer with exceeding adjacent channels using 3D antarafacial channel integration and vertical‐quasi‐coaxial‐based matching network is proposed. Working principle, design method and test solution of this proposed K‐/Ka‐band diplexer are well illustrated, and the high‐isolation (>40 dB) in very adjacent wideband channels at K‐band (18–23.5 GHz) and Ka‐band (25.8–31.6 GHz) is achieved within a tiny size of 9 × 4 × 0.87 mm. A miniaturised high‐isolation K‐/Ka‐band diplexer with exceeding adjacent channels using 3D antarafacial channel integration and vertical‐quasi‐coaxial‐based matching network is proposed. For smaller size, lower loss and lower channel interference, the high‐order low‐pass filter for the K‐band channel and the four‐line‐interdigital‐coupled wideband bandpass filter for the Ka‐band channel are respectively designed on two low‐loss glass‐based substrates, and these two substrates are integrated on the two antarafacial surface of the mounting board. The vertical‐quasi‐coaxial (VQC) embedded in the mounting board is not only used as three‐dimensional (3D) interconnection of the two antarafacial channels but also designed as the constituent part of the matching/isolation network, and this can effectively decrease the impedance traction caused by the Ka‐band filter for the K‐band channel of the diplexer. In addition, four transmission zeros of the K‐band filter are designed at the whole passband of the Ka‐band channel to improve the isolation to the K‐band channel for guaranteeing the performance of the diplexer at the Ka‐band channel. Furthermore, working principle, design method and test solution of this proposed K‐/Ka‐band diplexer are well illustrated, and the high‐isolation (>40 dB) in very adjacent wideband channels at K‐band (18–23.5 GHz) and Ka‐band (25.8–31.6 GHz) is achieved within a tiny size of 9 × 4 × 0.87 mm.

Design of high isolation diplexer with novel matching network

Design of High-Isolation Diplexer Based on Microstrip Coupled Lines

A novel design of 4-port diplexer with high isolation

A Novel Design Method for High Isolated Microstrip Diplexers Without Extra Matching Circuit.

Design of A Compact Diplexer Using Microstrip and Slotline Dual-Mode Resonators

A Multi-Coupled Line Based Microstrip Diplexer with High Figure-of-merit

A Novel Microstrip Diplexer Based on Coupled Line

High Isolation Diplexer Using Quarter-Wavelength Resonator Filter

Design of High-Performance Microstrip Diplexers with Stub-Loaded Parallel-Coupled Lines

High Isolation And Common-Mode Suppression Balanced-To-Balanced Microstrip Diplexer With Mixed Coupling

Design of High-Isolation Topological Duplexer Utilizing Dual-Edge State Topological Waveguides

High Performance Superconducting Common Resonator Diplexer and Analysis Between Isolations and Topologies

Design of Compact Superconducting Diplexer with Spiral Short-Circuited Stubs

Diplexer with High Isolation Using Multi-Order Resonances

Compact Microstrip Diplexer Based on a Novel Coupling Topology

Compact Multimode-Resonator Diplexer with Wide Upper-Stopband and High Isolation

A Novel Design for a Planar Microstrip Triple Diplexer With Enhanced Selectivity Using Highly-Selective Bandpass Filters

A novel microstrip diplexer design using defected ground structure

A Compact and High-Isolated Multiresonator-Coupled Diplexer

A Novel Compact Diplexer with High Isolation Based on the Mode Composite Ridged Waveguide

Miniaturised high‐isolation K‐/Ka‐band diplexer with 3D antarafacial channel integration using vertical quasi‐coaxial matching network