Abstract:To protect power systems from severe short circuit faults, the zero-current switching (ZCS) technique is widely accepted due to its fast interruption speed. However, the traditional ZCS technique is more complicated in bidirectional switching, which limits its wide application, especially in AC power systems. Therefore, a novel auto-oriented bidirectional ZCS hybrid circuit breaker is proposed to simplify the overall topology of the circuit breaker. The design of the ZCS hybrid circuit breaker is based on the idea of diverting the pulse current toward the reverse direction of the fault current by the arcing voltage itself. The proposed scheme can interrupt bidirectional faults with just one ZCS circuit, without detecting fault current direction. Firstly in the paper, the topology and operating principles of the proposed bidirectional ZCS hybrid circuit breaker are introduced. Moreover, the key parameters are optimized to make the hybrid circuit breaker capable of bidirectional interruption automatically. Furthermore, dielectric recovery characteristics of the vacuum interrupter under special conditions are also measured to determine the design parameters. The proposed topology of the bidirectional ZCS hybrid circuit breaker is validated using a 450VAC/630A prototype. Short circuit breaking tests of the prototype are conducted without detecting fault current direction in advance. Experimental results show that the breaking time of the prototype is less than 1 ms in clearing either direction of fault current with a prospective value of 20 kA and $\text{d}i/\text{d}t$ of 8 A/ $\mu \text{s}$ . The feasibility of the proposed scheme is verified with these test results.

Simulation and Analysis of a HVDC Vacuum Circuit Breaker Based on Artificial Current Zero

Simulation and Analysis on the Interruption Process of Hvdc Vacuum Switch with Forced Current Zero

Simulation On Power Characteristic Of Uhvdc During Commutation Failure And Dc Block

Design and Numerical Investigation of A Hvdc Vacuum Switch Based on Artificial Current Zero

Research on the Experimental Method for Hvdc Vacuum Circuit Breaker Based on Artificial Current Zero

Numerical simulation of vacuum arc and anode thermal process during the interruption process of HVDC vacuum switch with forced current zero

Simulation Study on Current-zero Period Phenomenon and Analyse of High Voltage Gas Circuit Breaker

A 320kV hybrid HVDC circuit breaker based on thyristors forced current zero technique

Simulation on the Residual Axial Magnetic Field in Vacuum Dc Interruption Based on Artificial Current Zero

Research on Interrupting Processes of A 10 kV Mechanical HVDC Circuit Breaker

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Research on the Current Commutation in a Novel Hybrid HVDC Circuit Breaker

Synthetic Test Circuit with Two‐level Voltage Source for HVDC Circuit Breakers

Review on the Research of Vacuum Circuit Breaker for DC Breaking

Topology, Control and Fault Analysis of a New Type HVDC Breaker for HVDC Systems

Technical Assessment on Self-Charging Mechanical HVDC Circuit Breaker

Topology, Modeling and Transient Current Transfer Analysis of DC Hybrid Vacuum Circuit Breaker Based on SiC Module

Investigation on DC Interruption Based on Artificial Current Zero of Vacuum Switch

Design and Implementation of an Auto-Oriented Bidirectional ZCS Hybrid Circuit Breaker

Design and Study of the Key Characteristics of a New DC Vacuum Interrupter with a High Peak and Low Residual Magnetic Field