Abstract:We performed a combined experimental and theoretical investigation of the oxidation behavior of pure Ni and of the following multi-component Ni-containing alloys with nearly equiatomic compositions: FeNi, CoFeNi, CoCrFeNi, and CoCrFeMnNi. The materials were exposed to air at ambient pressure and at a temperature of 800°C for 150 minutes, their weight-gain due to oxidation was continuously monitored and the products of oxidation were subsequently characterized by XRD. The most common oxides formed have spinel or halite structure and the materials resistance to oxidation increases as: FeNi < CoFeNi < Ni < CoCrFeMnNi < CoCrFeNi. We found further that the oxidation-resistance of the materials does not correlate linearly with the number of elements present, instead the type of elements impacts significantly the materials susceptibility to oxidative damage. Cr is the element that imparted higher resistance to oxidation while Mn and Fe worsened the materials performance. In order to better understand the mechanisms of oxidation we employed thermodynamic equilibrium calculations and predicted the phase stability of oxides of the elements that are present in the materials, in different ranges of temperature, composition and oxygen activity. Additionally, we determined the phase compositions for the thermodynamically stable oxides at 800°C. The results from the thermodynamic modelling are in good agreement with the experimental finds. The alloys with low resistance to oxidation such as CoFeNi and FeNi, form the Fe3O4 spinel phase which tends to dominate the phase diagram for these materials. The presence of Cr increases the resistance to atomic rearrangement due to slow diffusion in the complex structure of Cr containing spinel phases. This causes the extremely high resistance to oxidation of the CoCrFeNi alloy. The presence of Mn in CoCrFeNi stabilizes the Mn3O4 spinel which reduces the oxidation-resistance of the alloys due to the high mobility of Mn.

Probing the Oxidation Kinetics of Small Permalloy Particles

Oxidation Mechanism of Three Fe-Al Alloys with and Without Addition of 0.1 At% Yttrium at 800 °C

Nonlinear Oxidation Behavior in Pure Ni and Ni-Containing Entropic Alloys

Application of thermal analysis techniques to study the oxidation/reduction phenomena during sintering of steels containing oxygen-sensitive alloying elements

Revealing the oxidation behavior of AlCr x FeNi lightweight multi-principal element alloys via experimental and first-principles calculations

Electronic-scale assessment of high-temperature oxidation mechanisms in a novel Fe-based alloy

Non-Isothermal Oxidation Behaviors and Mechanisms of Ti-Al Intermetallic Compounds.

Simulations on the oxidation of Al-Mg alloy nanoparticles using the ReaxFF reactive force field

Unraveling the oxidation mechanism of an AlCoCrFeNi high-entropy alloy at 1100 °C

The Oxidation Mechanism of Pure Aluminum Powder Particles

Effect of Grain Size on Oxidation Behavior of Fe-40ni-15cr Alloys

Modeling of Oxidation Kinetics of Y-Doped Fe–Cr–Al Alloys

A ReaxFF molecular dynamics study of the micro-dynamic oxidation behavior of Ni-Al alloys

The Oxidation Process and Methods for Improving Reactivity of Al

Oxidation-Induced Atom Diffusion and Surface Restructuring in Faceted Ternary Pt–Cu–Ni Nanoparticles

A Phase-Field Study on Internal to External Oxidation Transition in High-Temperature Structural Alloys

Exploring the oxidation mechanism of Ni3Al based alloy by ReaxFF molecular dynamics simulation

The Influence of FeO on the Reaction between Fe–Al–Ca Alloy and Al2O3–CaO–FeO Oxide during Heat Treatment at 1473 K

Study of the Oxidation Behavior of Fine-Grained Graphite ET-10 by Combining X-ray Μct with Mercury Porosimetry

The Oxidation Behaviour of Tic Matrix Ni3al and Fe40al Toughened Composites at High Temperatures