Abstract:This paper reports a novel oscillation control algorithm for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation (MEAM) technique, which enhances the robustness against the frequency variation of the driving mode, compared to the conventional EAM (CEAM) scheme. In this approach, the carrier voltage exerted on the proof mass is frequency-modulated by the drive resonant frequency. Accordingly, the pick-up signal from the interface circuit involves a constant-frequency component that contains the amplitude and phase information of the vibration displacement. In other words, this informational detection signal is independent of the mechanical resonant frequency, which varies due to different batches, imprecise micro-fabrication and changing environmental temperature. In this paper, the automatic gain control loop together with the phase-locked loop are simultaneously analyzed using the averaging method and Routh–Hurwitz criterion, deriving the stability condition and the parameter optimization rules of the transient response. Then, a simulation model based on the real system is set up to evaluate the control algorithm. Further, the proposed MEAM method is tested using a field-programmable-gate-array based digital platform on a capacitive vibratory gyroscope. By optimizing the control parameters, the transient response of the drive amplitude reveals a settling time of 45.2 ms without overshoot, according well with the theoretical prediction and simulation results. The first measurement results show that the amplitude variance of the drive displacement is 12 ppm in an hour while the phase standard deviation is as low as 0.0004°. The mode-split gyroscope operating under atmospheric pressure demonstrates an outstanding performance. By virtue of the proposed MEAM method, the bias instability and angle random walk are measured to be 0.9° h−1 (improved by 2.4 times compared to the CEAM method) and 0.068° (√h)−1 (improved by 1.4 times), respectively.

A Man-Portable Mems Rotation Modulation Platform Using the Permanent Magnet Synchronous Motor Vector Control Algorithm

Rotation Control and Characterization of High-Speed Variable-Capacitance Micromotor Supported on Electrostatic Bearing.

Design of Miniaturized MEMS Gyro North Finder Based on Two-Phase Axial Flux PMSM

A Novel Mems Gyro North Finder Design Based On The Rotation Modulation Technique

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

A novel oscillation control for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation technique

Sensorless Control Strategy of Novel Axially Magnetized Vernier Permanent-Magnet Machine

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

A Low-Cost MEMS Missile-Borne Compound Rotation Modulation Scheme

Vector Control System of PMSM Based on DSP

Reconfigurable Asymmetric Embedded Magnetorquers for Attitude Control of Nanosatellites

A Dual-Linear Kalman Filter for Real-Time Orientation Determination System Using Low-Cost MEMS Sensors

High-Resolution Rotation-Measuring System for MEMS Ultrasonic Motors Using Tunneling Magnetoresistance Sensors

A Hybrid Interior Permanent Magnet Variable Flux Memory Machine Using Two-Part Rotor

Investigation of Permanent Magnet Synchronous Motor System Used in Electric Vehicles Based on Space Vector Modulation

A Vertically Supported Ring-Type MEMS Gyroscope Utilizing Electromagnetic Actuation and Sensing

MEMS Gyroscope Control System Using a Band-Pass Continuous-Time Sigma-Delta Modulator

Design of a Tri-Axial Surface Micromachined MEMS Vibrating Gyroscope

Modeling of an electrostatic micromotor based on a levitated rotor

Attitude estimation of a permanent magnet spherical motor based on an improved fast discriminative scale space tracking algorithm

MEMS strapdown inertial attitude measurement system using rotational modulation technology