Abstract:Highly efficient and stable, rigid and flexible p‐i‐n perovskite solar cells are developed by incorporating a 2‐(acetyloxy)‐N,N,N‐trimethylethanium chloride additive into the lead iodide precursor solution to prepare a porous PbI2 layer. The good diffusion of the organic ammonium salt results in flat and dense perovskite film with large particle size, which achieves high power conversion efficienciesPCE of 23.40% (rigid) and 21.10% (flexible) with excellent ambient and mechanical stability. Flexible perovskite solar cells (FPSCs) are attracting widespread research and attention for their benefits as the next‐generation wearable electronic products. However, there are still many challenges in the quest to achieve dense, pinhole‐free, high crystal quality, low defect, and stable perovskite films, which limit further improvement in the efficiency and stability of FPSCs. Herein, a novel technique for the incorporation of quaternary ammonium halide (QAH) additives to prepare fluffy porous lead iodide layers by using a two‐step sequential deposition method, is reported. Benefiting from the good diffusion of organic amine salts on porous PbI2 layers, flat and dense perovskite films are produced with large particle sizes, few defects, and high crystal quality. Finally, the champion rigid and flexible p‐i‐n PSCs with the 2‐(acetyloxy)‐N,N,N‐trimethylethanium chloride (AtaCl) additive achieves exciting power conversion efficiencies (PCE) of 23.40% and 21.10%, respectively. The device with the AtaCl additive retains over 90% of its original PCE under ambient conditions (40 ± 5% relative humidity (RH)) over 1000 h of aging without encapsulation. In addition, the flexible device with the AtaCl additive shows excellent stability under mechanical bending conditions, retaining ≈85% of its original PCE after 10 000 cycles (bending radius = 5 mm).

Efficient Perovskite Solar Cells Based on Multilayer Transparent Electrodes Through Morphology Control

Enhanced Performance and Flexibility of Perovskite Solar Cells Based on Microstructured Multilayer Transparent Electrodes

Surface Plasmon‐Assisted Transparent Conductive Electrode for Flexible Perovskite Solar Cells

High‐Performance Semitransparent and Bifacial Perovskite Solar Cells with MoO x /Ag/WO x as the Rear Transparent Electrode

Solution-Processed Polymeric Thin Film As the Transparent Electrode for Flexible Perovskite Solar Cells.

Multi-layer transparent electrodes for high performance bifacial perovskite solar cells

Enhanced Photovoltaic Performance of CH3NH3PbI3 Perovskite Solar Cells Through Interfacial Engineering Using Self-Assembling Monolayer.

Semitransparent Perovskite Solar Cells with Dielectric/Metal/Dielectric Top Electrodes

W(Nb)O X -Based Efficient Flexible Perovskite Solar Cells: from Material Optimization to Working Principle

Energy Level and Thickness Control on PEDOT:PSS Layer for Efficient Planar Heterojunction Perovskite Cells

A Simple Perylene Derivative As a Solution-Processable Cathode Interlayer for Perovskite Solar Cells with Enhanced Efficiency and Stability.

Porous Lead Iodide Layer Promotes Organic Amine Salt Diffusion to Achieve High Performance p‐i‐n Flexible Perovskite Solar Cells

Water-Soluble Polymeric Interfacial Material for Planar Perovskite Solar Cells.

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

Controlled Fabrication of Composite Transparent Electrodes for Semitransparent Perovskite Solar Cells with above 84% Fill Factor

High‐Efficiency and Stable Perovskite Solar Cells via Buried Interface Modification with Multi‐Functional Phosphorylcholine Chloride

Fast and Controllable Electric-Field-Assisted Reactive Deposited Stable and Annealing-Free Perovskite toward Applicable High-Performance Solar Cells

Efficient Bifacial Semitransparent Perovskite Solar Cells Using Ag/V2O5 As Transparent Anodes

Compositional and Morphological Engineering of Mixed Cation Perovskite Films for Highly Efficient Planar and Flexible Solar Cells with Reduced Hysteresis

PEDOT:PSS-CrO3 Composite Hole-Transporting Layer for High-Performance P-I-n Structure Perovskite Solar Cells

Efficient Ni/Au Mesh Transparent Electrodes for ITO-Free Planar Perovskite Solar Cells.