Abstract:In this paper, a multi-mode square ring loaded resonator (SRLR) comprising a full-wavelength ring resonator and six open stubs is introduced. The resonant characteristics are discussed and analyzed using differential-mode (DM) and common-mode (CM) equivalent circuits. Compared to the conventional design, the proposed SRLR involves two advantageous modifications for high-order balanced structure. First, two pairs of open stubs on the four corners of the ring resonator provide more flexible control of the internal coupling between two SRLR units under DM excitation. In addition, the shorted H-shaped resonator is compact, which makes proposed structure suitable for high-order filter design with desired operating frequency and bandwidth. Second, one pair of open stubs is added to the ring resonator along the horizontally symmetric plane. We found that the proposed SRLR provides more design freedom for CM noise suppression without extra components or defected ground structure. In addition, the proposed SRLR topology structure is folded to avoid large circuit occupation. Based on our analyses, a fourth-order balanced dual-band bandpass filter was designed with two passbands operating at 2.2 GHz and 3.5 GHz with corresponding in-band insertion loss of 0.1 dB and 0.12 dB, respectively. The filter was fabricated using high-temperature superconductor (HTS) YBCO thin films on an MgO substrate. Good agreement between simulated and measured frequency responses was observed, which verifies the proposed structure and design method.

High Selective Frequency Response in a Complementary Split Ring Resonator Based Transmission Line

High Selective Metamaterial Resonator Based on Complementary Split Ring Resonator

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

An Extended Doublet Substrate Integrated Waveguide (SIW) Bandpass Filter with a Complementary Split Ring Resonator (CSRR)

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

High-Selectivity Frequency-Selective Rasorber Based on Low-Profile Bandpass Filter

Propagation characteristics of complementary split-ring resonators excited by internal cylindrical wave

Novel Cross-Coupled Filter Design Using Improved Split-Ring Resonators Based On Stepped Impedance Resonator

Wide Transmission Band Rasorber of Center‐connected Pattern with Multi‐resonators

Wideband bandpass filter with excellent selectivity using new CSRR-based resonator

Highly Selective Planar Filters with Shielded Split-Ring Resonators

Equivalent Circuit of Complementary Split‐ring Resonator Loaded Transmission Line

High-Selectivity Bandpass Filter Based on Two Merged Ring Resonators

Novel Wide-Stopband Bandpass Filter with Good Frequency Selectivity Based on Composite Right/Left Handed Transmission Line

A High Selectivity Dual‐band Bandpass Filter Using Quadruple‐mode Multi‐stub Loaded Ring Resonator (SLRR)

Compact Dual-Band Bandpass Filters Using Complementary Split-Ring Resonators with Closely Spaced Passbands

Balanced dual-band superconducting filter using square ring loaded resonators with ultra-low insertion loss and common-mode noise suppression

Dual-Band Bandpass Filter with Multiple Controllable Transmission Zeroes and Wide Stopband

Dual-band-rejection filter based on split ring resonator (SRR) and complimentary SRR

Dual-stop-band filter designed using CRLH transmission line