Abstract:A high-selectivity bandpass filter (BPF) based on two merged ring resonators is presented in this paper. The structure of this proposed BPF can be seen as the two one-wavelength ring resonators merged each other by sharing the common lambda(g)/2 microstrip line. Due to symmetric structure, it can be analyzed by even- and odd-mode method and the locations of six transmission zeros are calculated using input impedance deductions. For further demonstration, a BPF example centered at 2 GHz is fabricated with high frequency selectivity. The measured 3-dB fractional bandwidth is 11% (1.89-2.11 GHz) and insertion loss is less than 2 dB in the passband. Good agreement between simulation and measurement verifies the feasibility of the design method. this method is at the expense of a large circuit size. Besides, several novel structures are introduced to achieve higher performance, such as two pairs of twist modified split-ring resonators [8] and stepped impedance open-stub loaded ring resonator [9]. In this paper, a BPF based on two merged ring resonators with high selectivity is proposed, which is quite different from the BPF using ring resonators in [10]. Due to the symmetric structure of this proposed BPF, the distributions of six TZs can be calculated by odd-and even-mode method. The theoretical derivation of the proposed BPF is demonstrated. For validation, a BPF example centered at 2 GHz is fabricated and measured.

Highly Selective Planar Filters with Shielded Split-Ring Resonators

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

High-Selectivity Bandpass Filter Based on Two Merged Ring Resonators

Low-Loss Compact SIW Filters with Shielded Complementary Split-Ring Resonator

Compact and Highly-Selective Microstrip Bandpass Filter and Diplexer Using Two-Stage Twist Modified Split-Ring Resonators

Compact and High-Selectivity Microstrip Bandpass Filter Using Two-Stage Twist-Modified Asymmetric Split-Ring Resonators

High Selective Frequency Response in a Complementary Split Ring Resonator Based Transmission Line

Microwave Linear-phase Microstrip Filters Using Ring Resonators

High-Selectivity Frequency-Selective Rasorber Based on Low-Profile Bandpass Filter

Self-Packaged Dual-Band Filter with High Selectivity and Low Radiation Loss

Novel Cross-Coupled Filter Design Using Improved Split-Ring Resonators Based On Stepped Impedance Resonator

A High Selectivity Dual‐band Bandpass Filter Using Quadruple‐mode Multi‐stub Loaded Ring Resonator (SLRR)

Highly selective microstrip bandpass filters using dual-mode patch resonator loaded with short via

Compact Microstrip Wideband Bandpass Filter with High Selectivity

High-selectivity single-ended and balanced bandpass filters using ring resonators and coupled lines loaded with multiple stubs

Miniaturized Bandpass Filter with High Selectivity and Wide Stopband Using Dual-Layer Structure

High Selective Metamaterial Resonator Based on Complementary Split Ring Resonator

Synthesis Design of Wideband High-Selectivity HTS Filter by Cascading Dual-Mode Resonators

Realization Of Millimeter-Wave Dual-Mode Filters Using Square High-Order Mode Cavities

A Quad‐band Bandpass Filter Using Split‐ring Based on T‐shaped Stub‐loaded Step‐impedance Resonators

A planar three-section coupled-line high-selectivity wideband bandstop filter