Abstract:This paper investigates the pull-in dynamics of single-sided and double-sided parallel-plate (SSPP and DSPP) structures employed in MEMS devices for acceleration measurement. A lumped electromechanical model considering a variable damping coefficient and external acceleration is developed for studying their pull-in dynamical behavior. The critical pull-in displacement and pull-in voltage for both parallel-plate structures operated with external acceleration are derived based on the static and dynamical analysis of the proposed model, which are in good agreement with the experimental results. The derived closed-form solutions are shown to be capable of predicting the pull-in behavior of both parallel-plate structures in an overdamped system. Two MEMS parallel-plate structures exhibit distinct pull-in characteristics due to their distinct configurations. The commonly used SSPP structure for MEMS devices is shown to have a relatively linear response to the external acceleration in terms of the critical pull-in displacement and pull-in voltage. However, the DSPP structure exhibits much larger yet nonlinear sensitivity of both the critical pull-in displacement and the critical pull-in voltage to a small range of external acceleration, which has the potential of developing high-sensitivity accelerometers whenever the sensitivity nonlinearity is compensated. Moreover, the effects of pressure are characterized for both DSPP and SSPP devices, which affects the difference between the critical static and dynamic pull-in voltages. The SSPP structure is shown to have the critical pull-in voltage proportional to the logarithmic magnitude of the pressure, while that of the DSPP structure do not vary linearly with respect to the logarithmic magnitude of the pressure.

Size-dependent pull-in voltage and nonlinear dynamics of electrically actuated microcantilever-based MEMS: A full nonlinear analysis

Analytical model of electrostatic fixed-fixed microbeam for pull-in voltage

Multi-physics Analysis of an Electrostatically Actuated Microcantilever in Viscous Fluids

Hysteretic Dynamics of Ferroelectric Materials under Electro-Mechanical Loadings

Pull-In Dynamics of Two MEMS Parallel-Plate Structures for Acceleration Measurement

Influence of Micro-Cantilever Geometry and Gap on Pull-in Voltage

Nonlinear dynamics of nanoelectromechanical cantilevers based on nanowire piezoresistive detection

Analysis of Impact of Bottom Electrode Position on Dynamic Pull-In Parameters of Microcantilevers

Size-dependent nonlinear dynamics of a microbeam based on the modified couple stress theory

Modeling of Contact and Stiction in Electrostatic Microcantilever Actuators

Pull-in voltage analysis for an electrostatically actuated extensional microbeam with large deflection

Dynamics of a micro-cantilever for capacitive energy harvesting considering nonlinear inertia and curvature

Dynamic Actuation and Quadratic Magnetoelastic Coupling of Thin Magnetostrictive Shells

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Dynamics of Electrostatic MEMS Actuators

Analysis of nonlinear vibration of nano/microelectromechanical system switch induced by electromagnetic force under zero initial conditions

On the dynamic pull-in instability in a mass-spring model of electrostatically actuated MEMS devices

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

Electrostatic pull-in instability in MEMS/NEMS: A review

Dynamic Characteristics of Electrostatically Actuated Shape Optimized Variable Geometry Microbeam

Size-dependent nonlinear free vibration of magneto-electro-elastic nanobeams by incorporating modified couple stress and nonlocal elasticity theory