Abstract:Nonlinear buckling of elastic thin films on compliant substrates is studied by modeling and simulations to reveal the roles of pre-strain, elastic modulus ratio, and interfacial properties in morphological transition from wrinkles to buckle-delamination blisters. The model integrates an interfacial cohesive zone model with the Föppl–von Kármán plate theory and Green function method within the general framework of energy minimization. A kinetics approach is developed for numerical simulations. Subject to a uniaxial pre-strain, the numerical simulations confirm the analytically predicted critical conditions for onset of wrinkling and wrinkle-induced delamination, with which a phase diagram is constructed. It is found that, with increasing pre-strain, the equilibrium configuration evolves from flat to wrinkles, to concomitant wrinkles and buckle-delamination, and to an array of parallel straight blisters. The height and width of the buckle-delamination blisters can be approximately described by a set of scaling laws with respect to the pre-strain and interfacial toughness. Subject to an equi-biaxial pre-strain, the critical conditions are determined numerically to construct a similar phase diagram for the buckling modes. Moreover, by varying the pre-strain, modulus ratio, and interfacial toughness, a rich variety of equilibrium configurations are simulated, including straight blisters, and network blisters with or without wrinkles. These results provide considerable insight into diverse surface patterns in layered material systems as a result of the mechanical interactions between the film and the substrate through their interface, which suggests potential control parameters for designing specific surface patterns.

Buckling Induced Delamination and Microflow Analysis of Film/substrate System

Buckling Delamination Induced Microchannel: Flow Regulation in Microfluidic Devices

Dynamic Behaviors of Controllably Buckled Thin Films

Asymptotic analysis of nonlinear micro-film buckling

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Growth from buckling to buckling-driven delamination in a film/substrate system

A Simply Analytic Study of Buckled Thin Films on Compliant Substrates

Buckling of a Stiff Thin Film on a Compliant Substrate in Large Deformation

Finite Element Analysis of the Indentation-Induced Delamination of Bi-Layer Structures

Post-buckling Evolution of Compressed Thin Films Adhered to Rigid Substrates

Probabilistic Analysis of Micro-Film Buckling with Parametric Uncertainty

An Analytical Study of Two-Dimensional Buckling of Thin Films on Compliant Substrates

Local Versus Global Buckling Of Thin Films On Elastomeric Substrates

Prediction and Regulation of Delamination at Flexible Film/Finite-Thickness-Substrate Structure Interfaces

Size-Dependent Analysis of Strain Energy Release Rate of Buckling Delamination Based on the Modified Couple Stress Theory

Buckling And Post-Buckling Of Thin Film Under Thermal-Mechanical Coupled Load

Micro-Scale Delaminating and Buckling of Thin Film on Soft Substrate

Nonlinear Analysis of Compressed Elastic Thin Films on Elastic Substrates: from Wrinkling to Buckle-Delamination

Buckle-driven Delamination of Thin Film and the Influence of the Casimir or Van Der Waals Force Interaction

Compressive buckling of laminates with an embedded delamination

Theoretical and Numerical Analysis on Buckling Instability in a Thin Film Sandwiched Between Two Finite-Thickness Substrates under In-Plane Compression