Abstract:The high incidence of debonding as a failure mode in FRP-strengthened structures highlights the importance of regular inspections of the bond layer for any discontinuity. In contrary to most previous studies, which focus on the linear features of waves like amplitude and velocity, the present study utilises a novel collinear wave mixing technique for the generation of mixed harmonics of surface guided waves for debond characterisation. Experimental study is conducted in which a particular surface guided mode, sensitive to bond layer, is excited using wedge transducers. A three-dimensional finite element model is developed to understand the nonlinear interaction of surface guided waves with debonding, and the results obtained are compared with those obtained from the experimental results in both time and frequency domains. The numerical results are found to be in good agreement with the experimental ones. Later, extensive parametric studies are conducted on the validated model by changing the debond size. A damage index is proposed that rely on the band frequency amplitude of fundamental and higher order mixed harmonics paving the way for baseline-free debond quantification. The damage index (DI) exhibited a consistently increasing trend with debond size. Finally, a sensitivity analysis is conducted by increasing the debond size and comparing the relative parameter values of linear features (scattered amplitude and change in time of arrival) with the proposed damage index. The analysis results revealed that the proposed DI is more sensitive to the debond size than the conventional linear parameters that also requires pristine condition data. Thus, the study offers valuable insights into the collinear wave mixing phenomenon in FRP strengthened RC structures and proposes an efficient and practical technique for debond detection in the field.

Torsional Guided Wave-Based Debonding Detection in Honeycomb Sandwich Beams

Debonding detection of honeycomb sandwich structures using frequency response functions

Numerical and experimental investigation on debonding detection in honeycomb sandwich using air-coupled local defect resonance and coda wave analysis

A novel nondestructive testing method for honeycomb structure using acoustic band gap

An Improved Damage Index for Nondestructive Evaluation of a Disbond in Honeycomb Sandwich Structure Using Guided Waves

Application of Lamb wave and its coda waves to disbond detection in an aeronautical honeycomb composite sandwich

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

Digital twin method for predicting the critical load of debonding damage in honeycomb sandwich structures based on distributed optical fiber sensor and Dynamic Bayesian Network

Guided Wave Propagation in Detection of Partial Circumferential Debonding in Concrete Structures

Nonlinear harmonic wave-guided interfacial debonding identification in RC beams

Damage Imaging Identification of Honeycomb Sandwich Structures Based on Lamb Waves

Core–skin debonding detection in honeycomb sandwich structures through guided wave wavefield analysis

Damage Detection Method Based on Lamb Waves for Stiffened Composite Panels

Debonding Detection in Grouted Sleeves Using Axisymmetric Longitudinal Guided Waves

Damage Detection Based on Vibration for Composite Sandwich Panels with Truss Core

Damage Localization in Composite Lattice Truss Core Sandwich Structures Based on Vibration Characteristics

Guided wavefield curvature imaging of invisible damage in composite structures

Investigation of failure behavior in honeycomb sandwich panel containing interfacial debonding

Multichannel Analysis of Surface Waves Method-Based Interfacial Debonding Defection for Concrete-Filled Double-Steel-Plate Composite Walls

Mixed harmonic generation of surface guided waves by collinear wave mixing for debond identification in FRP-strengthened beams

Damage Localization In Composite Lattice Truss Core Sandwich Structures Based On Curvature Mode Shape