Abstract:Tensile rheological behavior of the Zr35Ti30Be27·5Cu7.5 metallic glass under conditions of high strain rates (strain rates ranging from 0.05 s−1 to 0.5 s−1) within the supercooled liquid region was studied. The stress-strain curve reveals that this metallic glass demonstrates non-Newtonian flow characteristics under these circumstances. The peak stress associated with stress overshoot increases as temperature decreases and strain rate increases. However, the steady-state flow stress displays an anomalous decrease due to rapid necking at high strain rates. Subsequently, the thermal processing map of the Zr35Ti30Be27·5Cu7.5 metallic glass was established and analyzed. It reveals that the alloy has relatively excellent thermoplastic forming ability at temperature between 630 K and 655 K and strain rates between 0.05 s−1-0.2 s−1. We found that under strain rates ε ˙ ≥ 10 − 2 s − 1 , the strain rate is the primary factor influencing normalized viscosity. Therefore, we developed a simplified Maxwell-Pulse constitutive model applicable to metallic glass in the supercooled liquid region under high strain rate conditions, by simplifying the constitutive equation for steady-state flow stress using a simplified formula for normalized viscosity calculation. The predictions of this simplified modified model align well with experimental values. By comparing the simplified and unsimplified Maxwell-Pulse constitutive models, the overall fitting accuracy of the simplified model was improved by 3–5%, with the highest improvement of 67% in the steady-state flow stress stage. These results indicate that the modified model accurately reflects the stress-strain relationship for the Zr35Ti30Be27·5Cu7.5 metallic glass under high temperature and high strain rate tensile conditions.

Effect of Strain Rate on Yielding Strength of a Zr-based Bulk Metallic Glass

Effect of Strain Rate on Mechanical Deformation Behavior in CuZr Metallic Glass

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Ductile to brittle transition of fracture of a Zr-based bulk metallic glass: Strain rate effect

High Strain Rate Induced Embrittlement of Zr-Based Bulk Metallic Glass

The Failure Stress of Bulk Metallic Glasses under Very High Strain Rate

The rheological behavior and constitutive model of Zr35Ti30Be27·5Cu7.5 metallic glass under high strain rate tensile conditions within the supercooled liquid region

Tensile Elastic Behavior of A Zr-Cu-Ag-Al Bulk Metallic Glass

Effect of Applied Stress on the Mechanical Properties of a Zr-Cu-Ag-Al Bulk Metallic Glass with Two Different Structure States

Mechanical Behavior of A Zr-Based Metallic Glass at Elevated Temperature under High Strain Rate

Effect of temperature and strain rate on deformation behavior in metallic glassy films

Microstructure of Cu 60 Zr 20 Ti 20 Bulk Metallic Glass Rolled at Different Strain Rates

Effect of Pre-Existing Shear Bands on the Tensile Mechanical Properties of A Bulk Metallic Glass

Quasi-static and dynamic compressive behavior of Zr-based bulk metallic glass with yttrium addition

Strain Rate Dependence of Mechanical Behavior in a CuZr-based Bulk Metallic Glass Composite Containing B2-CuZr Phase

Dependence of Shear Yield Strain and Shear Transformation Zone on the Glass Transition Temperature in Thin Film Metallic Glasses

Molecular dynamics simulation of strain rate effect on stress induced crystallization for metallic glass Cu

Densification and Strain Hardening of a Metallic Glass under Tension at Room Temperature.

High Temperature Deformation Behaviors of Ti40Zr25Ni3Cu12Be20 Bulk Metallic Glass

Effect of Strain Rate and Extrinsic SIZE Effect on Micro-Mechanical Properties of Zr-Based Bulk Metallic Glass

Effect of pre-straining on the structure and nano-mechanical properties of a CuZrAl bulk metallic glass