Abstract:Tensile tests were performed on Cu64Zr36 metallic glass at strain rates of 107/s, 108/s, and 109/s via classical molecular dynamics simulations to explore the underlying mechanism by which strain rate affects deformation behavior. It was found that strain rate has a great impact on the deformation behavior of metallic glass. The higher the strain rate is, the larger the yield strength. We also found that the strain rate changes the atomic structure evolution during deformation, but that the difference in the atomic structure evolution induced by different strain rates is not significant. However, the mechanical response under deformation conditions is found to be significantly different with the change in strain rate. The average von Mises strain of a system in the case of 107/s is much larger than that of 109/s. In contrast, more atoms tend to participate in deformation with increasing strain rate, indicating that the strain localization degree is more significant in cases of lower strain rates. Therefore, increasing the strain rate reduces the degree of deformation heterogeneity, leading to an increase in yield strength. Further analysis shows that the structural features of atomic clusters faded out during deformation as the strain rate increased, benefiting more homogeneous deformation behavior. Our findings provide more useful insights into the deformation mechanisms of metallic glass.

Strain Rate Dependence of Mechanical Behavior in a CuZr-based Bulk Metallic Glass Composite Containing B2-CuZr Phase

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Enhancing dynamic mechanical properties of bulk metallic glass composites via deformation-induced martensitic transformation

High temperature deformation behaviors of a CuZr-based bulk metallic glass composite

Temperature-dependent deformation behavior of a CuZr-based bulk metallic glass composite

Strain-induced structural evolution of interphase interfaces in CuZr-based metallic-glass composite reinforced by B2 crystalline phase

Change in free volume during the homogeneous flow of Zr-based bulk metallic glass matrix composite

Transformation-mediated Plasticity in CuZr based Metallic Glass Composites: A Quantitative Mechanistic Understanding

In situ high-energy X-ray diffraction study of thermally-activated martensitic transformation far below room temperature in CuZr-based bulk metallic glass composites

Compressive Behavior of (Cu0.47Zr0.45Al0.08)98Dy2 Bulk Metallic Glass at Different Strain Rates

Determining deformation behaviors in a CuZr-based bulk metallic glass composite

Evolution of B19’ phase during annealing and its influence on the mechanical properties of Zr45Cu45Al10 metallic glass composites

Homogeneous plastic deformation in a Cu-based bulk amorphous alloy

Effect of Strain Rate on Mechanical Deformation Behavior in CuZr Metallic Glass

Quasi-static and dynamic compressive behavior of Zr-based bulk metallic glass with yttrium addition

Plasticity-improved Zr–Cu–Al Bulk Metallic Glass Matrix Composites Containing Martensite Phase

Bulk Metallic Glass Composites Containing B2 Phase

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

Mechanically Driven Phase Separation and Corresponding Microhardness Change in Cu60Zr20Ti20 Bulk Metallic Glass

Effect of precipitate shape and distribution on mechanical behavior of shape memory metallic glass composites by molecular dynamics method

An in Situ Neutron Diffraction Study of Plastic Deformation in a Cu46.5Zr46.5Al7 Bulk Metallic Glass Composite