Highly Selective Oxidation of Sulfides on A Cds/C3n4 Catalyst with Dioxygen under Visible-Light Irradiation

Yong Xu,Zi-Cheng Fu,Shuang Cao,Yong Chen,Fu

DOI: https://doi.org/10.1039/c6cy01568a

IF: 6.177

2017-01-01

Catalysis Science & Technology

Abstract:A CdS/C3N4 visible-light catalyst exhibits high product selectivity towards photocatalytic oxidation of sulfides into corresponding sulfoxides with dioxygen in methanol.

What problem does this paper attempt to address?

Highly Selective Oxidation of Methanol to Dimethoxymethane over So42-/V2o5-Zro2

Meng Tao,Hongxia Wang,Bin Lu,Jingxiang Zhao,Qinghai Cai

DOI: https://doi.org/10.1039/c7nj01295k

IF: 3.3

2017-01-01

New Journal of Chemistry

Abstract:The sulfated vanadia-zirconia SO42-/V2O5-ZrO2 catalyst, prepared by an impregnation method and calcined at various temperatures, was found to have a high catalytic activity for methanol oxidation to dimethoxymethane in a fixed bed reactor and a batch autoclave using O-2 as the oxidant due to the crystalline V2O5 dispersed on the surface as redox active sites, as well as stronger acidic sites.
Metal-Free Oxidation of Sulfides by Carbon Nitride with Visible Light Illumination at Room Temperature

Pengfei Zhang,Yong Wang,Haoran Li,Markus Antonietti

DOI: https://doi.org/10.1039/c2gc35148j

IF: 9.8

2012-01-01

Green Chemistry

Abstract:Mesoporous graphitic carbon nitride (mpg-C3N4) has been developed as a non-metal, heterogeneous photocatalyst for the selective oxidation of sulfides to sulfoxides with O-2 at room temperature. Especially, the combination of mpg-C3N4 and aldehydes was a highly active system under visible-light irradiation. For example, mpg-C3N4/isobutyraldehyde catalytic oxidation of methyl phenyl sulfide afforded 97% conversion with 98% selectivity for the methyl phenyl sulfoxide in 4 h. Moreover, the mpg-C3N4 can be easily recovered by filtration and then reused at least four times without losing activity. By exploring the electron spin resonance and some comparative experiments, a catalytic mechanism of this oxidation was provided. Finally, the system also works well in the oxidation of a number of sulfides, including sulfides bearing various groups, and phenyl disulfide. The use of a metal-free heterogeneous catalyst and visible light energy, along with the mild reaction conditions makes this oxidation reaction an environmentally benign and energy-saving chemical process.
Highly Porous Conjugated Polymers for Selective Oxidation of Organic Sulfides under Visible Light

Kai Zhang,Zi Jun Wang,Saman Ghasimi,Beatriz Ma,Run Li

DOI: https://doi.org/10.1039/c4cc02861a

2016-01-01

Abstract:High surface area porous conjugated polymers were synthesized via the high internal phase emulsion polymerization technique and micropore engineering as efficient heterogeneous photocatalysts for highly selective oxidation of organic sulfides to sulfoxides under visible light.
Synergistic cooperative effect of CF 3 SO 2 Na and bis(2-butoxyethyl)ether towards selective oxygenation of sulfides with molecular oxygen under visible-light irradiation

Kai-Jian Liu,Zheng Wang,Ling-Hui Lu,Jin-Yang Chen,Fei Zeng,Ying-Wu Lin,Zhong Cao,Xianyong Yu,Wei-Min He

DOI: https://doi.org/10.1039/d0gc02663h

IF: 9.8

2021-01-01

Green Chemistry

Abstract:A practical method for the switchable synthesis of sulfoxides and sulfones through visible-light-initiated CF 3 SO 2 Na/2-butoxyethyl ether synergistic catalyzed oxygenation of sulfides was developed.

chemistry, multidisciplinary,green & sustainable science & technology
Decoration of CdS Nanowires with Ni3S4 Nanoballs Enhancing H2 and H2O2 Production under Visible Light

Yaru Wang,Jianjun Zhao,Wenqing Hou,Yiming Xu

DOI: https://doi.org/10.1016/j.apcatb.2022.121350

2022-01-01

Abstract:Much work in the past four decades has focused on CdS as photocatalyst for water splitting. Recently, Ni3S4 has been reported to be more active than IrO2 as an electrocatalyst for water oxidation. Herein we report a positive role of Ni3S4 in CdS photocatalysis. Reaction was conducted in aqueous suspension under a 420 nm light, either for proton reduction to H-2 in presence of Na2S and Na2SO3, or for O-2 reduction to H2O2 without addition of any sacrifices. In both cases, Ni3S4 were nearly not active. After Ni3S4 loading, however, the rates of H-2 and H2O2 production on CdS increased by factors as much as 21 and 3, respectively. Furthermore, Ni3S4/CdS was more efficient than CdS for proton and O-2 reduction on a cathode, respectively, while Ni3S4/CdS was less efficient than CdS for the photoelectron accumulation on an electrode at open circuit potential. Based on the solid photoluminescence spectra and band edge potentials, a possible mechanism is proposed, involving the interfacial electron transfer from CdS to Ni3S4, followed by an increased surface reaction, for proton (oxygen) reduction on Ni3S4 sites, and for sulfide (water) oxidation on CdS sites, respectively.
Highly efficient photocatalytic Suzuki coupling reaction by Pd3P/CdS catalyst under visible-light irradiation

Huai-Qing Yang,Qian-Qian Chen,Fulai Liu,Rui Shi,Yong Chen

DOI: https://doi.org/10.1016/j.cclet.2020.06.022

IF: 9.1

2021-02-01

Chinese Chemical Letters

Abstract:Monodispersed palladium phosphide (Pd3P) (5.2 ± 0.5 nm) was firstly applied to photocatalytic Suzuki coupling reaction under visible light irradiation with CdS nanoflake as a photosensitizer. This heterogeneous system exhibited high yields to corresponding products and excellent stability in alcohol solvent at room temperature.

chemistry, multidisciplinary
Surfactant-controlled Switchable Oxygenation of Sulfides to Sulfoxides or Sulfones under Visible-light Irradiation

Rongnan Yi,Yan Wu,Junhao Chen,Ting Wu,Jin-Yang Chen

DOI: https://doi.org/10.1039/d4nj01784f

IF: 3.3

2024-06-02

New Journal of Chemistry

Abstract:A visible-light induced selective oxidation of sulfides to sulfoxides or sulfones was reported at ambient temperature in H2O under catalyst-free conditions, using oxygen as green oxidant. The surfactants play a key role in this oxidation, and sulfoxides or sulfones were obtained in high yields respectively promoted by different surfactants.

chemistry, multidisciplinary
Fabrication of Anderson-Polyoxometalates/TiO2/C3N4 heterojunction composite for efficient visible-light-driven photooxidative desulfurization

Haowei Zhang,Ting Su,Shufen Yu,Weiping Liao,Wanzhong Ren,Zhiguo Zhu,Kaixuan Yang,Christophe Len,Guohua Dong,Deyang Zhao,Hongying Lü

DOI: https://doi.org/10.1016/j.mcat.2023.112916

IF: 4.6

2023-02-01

Molecular Catalysis

Abstract:An effective heterogeneous nanocatalyst (NH4)4CuMo6O24/TiO2/g-C3N4 (abbr. CuMo6/TCN) was prepared by immobilization of (NH4)4CuMo6O24 on TiO2/g-C3N4. The obtained catalysts were characterized by UV–vis diffuse reflection spectra (UV–vis), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS) and etc. Catalytic performance was investigated for the photooxidative desulfurization (PODS) with H2O2 under visible light. Influencing factors on the ability of optimal photocatalytic oxidation capacity of sulfides were studied to explore the optimum condition. The catalyst exhibits very high catalytic activity and 98.3% desulfurization of DBT using only 20 mg catalyst with H2O2 as oxidant in 3 h at 30 °C. In addition, the presence of aromatics interference and the cycling ability of the catalyst experiments were explored, which proves the catalyst has a good anti-interference ability and stability. In addition, CuMo6/TCN PODS system mechanism were elucidated through the experimental characterizations and quenching experimental results.

chemistry, physical
Visible-light-induced sulfoxidation using chitosan-supported organic dyes photocatalyst

Wei Chen,Diankuan Gu,Tao Zhou,Xinwen Peng

DOI: https://doi.org/10.1016/j.dyepig.2022.111042

IF: 5.122

2022-12-30

Dyes and Pigments

Abstract:Heterogeneous photocatalysts are recognized as promising candidates for photoredox reactions owing to their environmental benignity and economic efficiency. However, various functionalized organic or inorganic materials are usually utilized as carriers while not considering their complex preparation procedures and the high costs. Moreover, the catalyst loadings are not given sufficient attention. Herein, a novel recyclable photocatalyst is developed by anchoring organic dyes on biomass-derived polymers through a facile ion-exchange process. It was applied for triggering photooxidation of sulfides using air as an environmentally benign oxidant. Results show that it is a highly effective photocatalyst for selective oxidation reactions to afford a wide assortment of valuable sulfoxides. The strategy is also applicable to the synthesis of sulfoxides from alkenes and thiols. The synthetic utility of the biomass-supported organic dyes photocatalysts, together with its recoverability, reusability, and simplified purification process, renders it promising for the transformation of organic chemicals into valuable complexes.

engineering, chemical,chemistry, applied,materials science, textiles
Selective Visible-Light Photocatalytic Oxidation of Sulfides and Catalytic CO 2 Fixation by Two-Interpenetrated Photoresponsive MOF-150

Yan Li,Fei Gao,Juanjuan Xue,Guo-Ping Yang,Yao-Yu Wang

DOI: https://doi.org/10.1021/acs.cgd.3c00120

IF: 4.01

2023-03-22

Crystal Growth & Design

Abstract:Sulfides and CO2 are the main pollutants that cause environmental acidification and the greenhouse effect. However, the rational use of these pollutants can not only save resources but also improve the environment. The two-interpenetrated MOF-150 was prepared by the photoresponsive 4,4′,4″-nitrilotribenzoic acid (H3NTB) ligand and Zn4O clusters, and it exhibits excellent optical activity derived from H3NTB. Especially as the substrate, thioanisole is oxidized to sulfoxide with medicinal value after 10 h of Xe light irradiation, and the conversion rate of 98% and the selectivity of 100% are obtained. Higher photocatalytic performance is also observed when the substrate is extended to other sulfides (7 examples). At the same time, MOF-150 has an excellent performance in the capture and recycling catalytic fixation of CO2. With epichlorohydrin as the reaction substrate, the cycloaddition efficiency of CO2 can reach over 99%. When it is extended to other epoxides, satisfactory cycloaddition efficiency was also obtained (7 examples). Therefore, MOF-150 is a promising heterogeneous catalyst with high catalytic efficiency and selectivity for a wide range of substrates.

chemistry, multidisciplinary,materials science,crystallography
Covalent organic framework stabilized CdS nanoparticles as efficient visible-light-driven photocatalysts for selective oxidation of aromatic alcohols

Kaiyue Zhang,Guilong Lu,Zuoshuai Xi,Yaqiong Li,Qingjie Luan,Xiubing Huang

DOI: https://doi.org/10.1016/j.cclet.2020.12.021

IF: 9.1

2021-07-01

Chinese Chemical Letters

Abstract:Noble-metal-free photocatalysts with high and stable performance provide an environmentally-friendly and cost-efficient route for green organic synthesis. In this work, CdS nanoparticles with small particle size and different amount were successfully deposited on the surface of covalent organic frameworks (COFs). The deposition of suitable content of CdS on COFs could not only modify the light adsorption ability and the intrinsic electronic properties, but also enhance the photocatalytic activity and cycling performance of CdS for the selective oxidation of aromatic alcohols under visible light. Especially, COF/CdS-3 exhibited the highest yield (97.1%) of benzaldehyde which is approximately 2.5 and 15.9 times as that of parental CdS and COF, respectively. The results show that the combination of CdS and COF can improve the utilization of visible light and the separation of photo-generated charge carriers, and COF with the π-conjugated system as supports for CdS nanoparticles could provide efficient electron transport channels and improve the photocatalytic performance. Therefore, this kind of COF-supported photocatalysts with accelerated photo-induced electrons and charge-carrier separation between semiconductors possesses great potentials in future green organic synthesis.

chemistry, multidisciplinary
Visible light induced efficient activation of persulfate by a carbon quantum dots (CQDs) modified γ-Fe2O3 catalyst

Yongjie Li,Wei Xiang,Tao Zhou,Mingjie Huang,Chen Wang,Xiaohui Wu,Juan Mao,Penghua Wang

DOI: https://doi.org/10.1016/j.cclet.2020.01.032

IF: 9.1

2020-10-01

Chinese Chemical Letters

Abstract:In this study, a carbon quantum dots modified maghemite catalyst (CQDs@γ-Fe2O3) has been synthesized by a one-step solvothermal method for efficient persulfate (PDS) activation under visible light irradiation. Transmission electron microscopy (TEM), scanning electron microscopy (SEM) and UV–vis diffuse reflectance spectroscopy (UV–vis DRS) characterization indicated that the formation of heterojunction structure between CQDs and γ-Fe2O3 effectively reduced the catalyst band gap (E g), favoring the separation rate of electrons and holes, leading to remarkable efficient sulfamethoxazole (SMX) degradation as compared to the dark-CQDs@γ-Fe2O3/PDS and vis-γ-Fe2O3/PDS systems. The evolution of dissolved irons also demonstrated that CQDs could accelerate the in-situ reduction of surface-bounded Fe3+. Electron paramagnetic resonance (EPR) and radical scavenging experiments demonstrated that both OH and SO4 − were generated in the reaction system, while OH was relatively more dominant than SO4 − for SMX degradation. Finally, the reaction mechanism in the vis-CQDs@γ-Fe2O3/PDS system was proposed involving an effective and accelerated heterogeneous-homogeneous iron cycle. CQDs would enrich the photo-generated electrons from γ-Fe2O3, causing efficient interfacial generation of surface-bond Fe2+ and reduction of adsorbed Fe3+. This visible light induced iron cycle would eventually lead to effective activation of PDS as well as the efficient degradation of SMX.

chemistry, multidisciplinary
Highly Selective Photoreduction of CO2 with Suppressing H2 Evolution over Monolayer Layered Double Hydroxide under Irradiation above 600 Nm.

Ling Tan,Si-Min Xu,Zelin Wang,Yanqi Xu,Xian Wang,Xiaojie Hao,Sha Bai,Chenjun Ning,Yu Wang,Wenkai Zhang,Yun Kyung Jo,Seong-Ju Hwang,Xingzhong Cao,Xusheng Zheng,Hong Yan,Yufei Zhao,Haohong Duan,Yu-Fei Song

DOI: https://doi.org/10.1002/anie.201904246

2019-01-01

Angewandte Chemie

Abstract:AbstractAlthough progress has been made to improve photocatalytic CO2 reduction under visible light (λ>400 nm), the development of photocatalysts that can work under a longer wavelength (λ>600 nm) remains a challenge. Now, a heterogeneous photocatalyst system consisting of a ruthenium complex and a monolayer nickel‐alumina layered double hydroxide (NiAl‐LDH), which act as light‐harvesting and catalytic units for selective photoreduction of CO2 and H2O into CH4 and CO under irradiation with λ>400 nm. By precisely tuning the irradiation wavelength, the selectivity of CH4 can be improved to 70.3 %, and the H2 evolution reaction can be completely suppressed under irradiation with λ>600 nm. The photogenerated electrons matching the energy levels of photosensitizer and m‐NiAl‐LDH only localized at the defect state, providing a driving force of 0.313 eV to overcome the Gibbs free energy barrier of CO2 reduction to CH4 (0.127 eV), rather than that for H2 evolution (0.425 eV).
Visible Light Sensitizer-Catalyzed Highly Selective Photo Oxidation from Thioethers into Sulfoxides under Aerobic Condition

Cong Ye,Yanbin Zhang,Aishun Ding,Yong Hu,Hao Guo

DOI: https://doi.org/10.1038/s41598-018-20631-7

IF: 4.6

2018-01-01

Scientific Reports

Abstract:We report herein a visible light sensitizer-catalyzed aerobic oxidation of thioethers, affording sulfoxides in good to excellent yields. The loading of the catalyst was as low as 0.1 mol%. The selectivity was excellent. Mechanism studies showed both singlet oxygen and superoxide radical anion were likely involved in this transformation.
ChemInform Abstract: Metal‐Free Oxidation of Sulfides by Carbon Nitride with Visible Light Illumination at Room Temperature.

Pengfei Zhang,Yong Wang,Haoran Li,Markus Antonietti

DOI: https://doi.org/10.1002/chin.201246086

2012-01-01

ChemInform

Abstract:AbstractMesoporous graphitic carbon nitride is developed as a non‐metal, heterogeneous photocatalyst for the selective oxidation of sulfides (I) to sulfoxides (II) with oxygen.
Selective conversion of CO 2 to CO under visible light by modulating Cd to In ratio: A case study of Cd-In-S colloidal catalysts

Qi Wang,Xiaohui Ren,Rongsheng Chen,Lulu Jia,Can He,Davin Philo,Sijie Li,Li Shi,Shunqin Luo,Jinhua Ye

DOI: https://doi.org/10.1016/j.apsusc.2022.155546

IF: 6.7

2022-11-09

Applied Surface Science

Abstract:Developing an effective photocatalyst to promote CO 2 conversion into solar fuel is necessary for addressing the global challenge of energy sustainability and environmental problems. In this work, we report the facile fabrication of Cd-In-S (CIS) colloidal nanocrystals as an efficient visible light-responsive photocatalyst for the conversion of CO 2 to CO. Both experimental and theoretical investigations reveal the importance of Cd to In ratio which positively influences not only the charge carrier separation rate but also the electronic structure of the CIS samples. In particular, the light absorption ability, redox potential of photo-induced electrons, and charge transfer ability were effectively modulated, endowing the optimized sample with a high CO evolution rate of 22.9 μmol h −1 and selectivity up to 80 % under visible light irradiation. The findings of this work can provide guidance for the design and construction of highly efficient catalytic materials for CO 2 conversion.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Insights into the Effect of Crystal Facets and Sulfur Defects on the Product Selectivity of Various CdS Configurations for CO2 Photoreduction: A DFT Study

Shuai Liu,Yang Meng,Yidong Zhong,Leiping Wang,Dingming Xue,Lei Tong,Honglei Zhang,Tao Wu,Guangsuo Yu,Hang Xiao

DOI: https://doi.org/10.3390/catal14100688

IF: 3.9

2024-10-04

Catalysts

Abstract:CO2 photoreduction into valuable hydrocarbons, such as CO, CH4, and C2H4, delivers a promising approach to address both environmental and energy challenges. Transition metal chalcogenides, particularly cadmium sulfide (CdS), have emerged as prominent candidates due to their tunable electronic properties and availability. This study delves into a comprehensive investigation of how CdS crystalline facets and sulfur-deficient surfaces modulate the product selectivity. Through employing density functional theory (DFT), we unravel the catalytic performance of various CdS crystal orientations and sulfur vacancy configurations. The results have shown that different CdS facets exhibit unique electronic characteristics and surface energetics, which influence the adsorption dynamics and reaction pathways. The introduction of sulfur vacancies further modulates the nature of active sites, leading to substantial shifts in product selectivity. A detailed investigation on the reaction mechanisms unveils that specific facets preferentially facilitate the formation of CO, while others are more conducive to the generation of hydrocarbons such as CH4 and C2H4, due to the variations in activation barriers and intermediate stabilities. These findings underscore the importance of crystal facet engineering and defect manipulation in tailoring catalyst performance thus providing valuable insights for the rational design of efficient and selective CO2 reduction metal catalysts.

chemistry, physical
Bifunctional CdS-MoO2 catalysts for selective oxidation of lactic acid coupled with photocatalytic H2 production

Wei Cai,Jincheng Liu,Yijun Luo,Zewei Liao,Bingjie Li,Xiaoyan Xiang,Yanxiong Fang

DOI: https://doi.org/10.1016/j.jcis.2024.07.081

Abstract:The persistent hurdles of charge rapid recombination, inefficient use of light and utilization of sacrificial reagents have plagued the field of photocatalytic hydrogen evolution (PHE). In this research, tiny MoO2 nanoparticles of 10 nm in diameter were prepared through a straightforward solvothermal approach with a specific ratio of oleylamine and oleic acid as stabilizers. The critical factor in the synthesis process was found to be the ratio of oleylamine to oleic acid. Moreover, a two-phase interface assembly method facilitated the uniform deposition of MoO2 onto CdS nanorods. Due to the localized plasmonic-thermoelectric effect on the surface of MoO2 along with its abundant oxygen vacancies, the composite catalyst exhibited outstanding photo-utilization efficiency and an abundance of active sites. The CdS-MoO2 composite displayed a unique photochemical property in transforming lactic acid into pyruvic acid and generating hydrogen simultaneously. After exposure to artificial sunlight for 4 h, significant values of 4.7 and 3.7 mmol⋅g-1⋅h-1 were achieved for hydrogen production and pyruvic acid formation, respectively, exceeding CdS alone by 3.29 and 4.02-fold, while the selectivity of pyruvic acid was 95.68 %. Furthermore, the S-Scheme electron transport mechanism in the composites was elucidated using Electron Paramagnetic Resonance (EPR) spectroscopy, radical trapping experiments, energy band structure analysis, and the identification of critical intermediates in the process of selective oxidation. This work sheds light on the design and preparation of high-performance photocatalysts for biorefining coupled with efficient hydrogen evolution.
CdS/ZnO: A Multipronged Approach for Efficient Reduction of Carbon Dioxide under Visible Light Irradiation

Li Zhang,Lijie Zhang,Yanmei Chen,Yuke Zheng,Jie Guo,Shaolong Wan,Shuai Wang,Chee Keong Ngaw,Jingdong Lin,Yong Wang

DOI: https://doi.org/10.1021/acssuschemeng.0c00190

2020-03-11

Abstract:Photocatalytic conversion of CO2 to fuels is a sustainable approach to obtain clean energy from CO2 using solar energy. This work focuses on a multipronged approach for efficient photoreduction of CO2 by designing a CdS/ZnO heterojunction photocatalyst. It is found that the combination of CdS and ZnO leads to about 11 times higher activity (383 K) for the reduction of CO2 to fuels than that over CdS under the irradiation of visible light. This is ascribed to the well-matched structural and intrinsic properties of the CdS/ZnO heterojunction, in which generation of electrons and holes by CdS-captured photons, separation and migration of electrons to ZnO by the heterojunction, and efficient adsorption/activation of CO2 on ZnO all work in a concert and harmonious way. This work highlights the potential of improving the performance of CO2 photocatalytic reduction based on a multipronged approach.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
ZnxCd1-xS Tunable Band Structure-Directing Photocatalytic Activity and Selectivity of Visible-Light Reduction of CO2 into Liquid Solar Fuels

Lanqin Tang,Libang Kuai,Yichang Li,Haijin Li,Yong Zhou,Zhigang Zou

DOI: https://doi.org/10.1088/1361-6528/aaa272

IF: 3.5

2018-01-01

Nanotechnology

Abstract:A series of ZnxCd1-xS monodispersed nanospheres were successfully synthesized with tunable band structures. As-prepared ZnxCd1-xS solid solutions show much enhanced photocatalytic efficiency for CO2 photoreduction in aqueous solutions under visible light irradiation, relative to pure CdS analog. Methanol (CH3OH) and acetaldehyde (CH3CHO) are the major products of CO2 photoreduction for the solid solutions with x = 0, 0.2, and 0.5. Interestingly, Zn0.8Cd0.2S photocatalyst with a wide band gap can also additionally generate ethanol (CH3CH2OH) besides CH3OH and CH3CHO. The balance between the band structure-directing redox capacity and light absorption should be considered to influence both product yield and selectivity of CO2 photoreduction. The possible photoreduction mechanism was tentatively proposed.

Highly Selective Oxidation of Sulfides on A Cds/C3n4 Catalyst with Dioxygen under Visible-Light Irradiation

Highly Selective Oxidation of Methanol to Dimethoxymethane over So42-/V2o5-Zro2

Metal-Free Oxidation of Sulfides by Carbon Nitride with Visible Light Illumination at Room Temperature

Highly Porous Conjugated Polymers for Selective Oxidation of Organic Sulfides under Visible Light

Synergistic cooperative effect of CF 3 SO 2 Na and bis(2-butoxyethyl)ether towards selective oxygenation of sulfides with molecular oxygen under visible-light irradiation

Decoration of CdS Nanowires with Ni3S4 Nanoballs Enhancing H2 and H2O2 Production under Visible Light

Highly efficient photocatalytic Suzuki coupling reaction by Pd3P/CdS catalyst under visible-light irradiation

Surfactant-controlled Switchable Oxygenation of Sulfides to Sulfoxides or Sulfones under Visible-light Irradiation

Fabrication of Anderson-Polyoxometalates/TiO2/C3N4 heterojunction composite for efficient visible-light-driven photooxidative desulfurization

Visible-light-induced sulfoxidation using chitosan-supported organic dyes photocatalyst

Selective Visible-Light Photocatalytic Oxidation of Sulfides and Catalytic CO 2 Fixation by Two-Interpenetrated Photoresponsive MOF-150

Covalent organic framework stabilized CdS nanoparticles as efficient visible-light-driven photocatalysts for selective oxidation of aromatic alcohols

Visible light induced efficient activation of persulfate by a carbon quantum dots (CQDs) modified γ-Fe2O3 catalyst

Highly Selective Photoreduction of CO2 with Suppressing H2 Evolution over Monolayer Layered Double Hydroxide under Irradiation above 600 Nm.

Visible Light Sensitizer-Catalyzed Highly Selective Photo Oxidation from Thioethers into Sulfoxides under Aerobic Condition

ChemInform Abstract: Metal‐Free Oxidation of Sulfides by Carbon Nitride with Visible Light Illumination at Room Temperature.

Selective conversion of CO 2 to CO under visible light by modulating Cd to In ratio: A case study of Cd-In-S colloidal catalysts

Insights into the Effect of Crystal Facets and Sulfur Defects on the Product Selectivity of Various CdS Configurations for CO2 Photoreduction: A DFT Study

Bifunctional CdS-MoO2 catalysts for selective oxidation of lactic acid coupled with photocatalytic H2 production

CdS/ZnO: A Multipronged Approach for Efficient Reduction of Carbon Dioxide under Visible Light Irradiation

ZnxCd1-xS Tunable Band Structure-Directing Photocatalytic Activity and Selectivity of Visible-Light Reduction of CO2 into Liquid Solar Fuels