Abstract:Electromagnetic cold crucible (EMCC) is widely applied to melt and solidify refractory and reactive materials, the electromagnetically driven flow in the melt leads to intensive transfer behaviors of solute and strongly affects crystal growth. In this paper, a 3-D numerical model for predicting the solute transfer behaviors in a square EMCC used for melting and directional solidifying was established and verified. A two-way coupling method was proposed to calculate the electromagnetically driven flow and its effects on solute transfer. Influences of the dominant dimensionless parameters on solute transfer behaviors in the EMCC were examined, those being the Hartman (Ha), magnetic Reynolds (Rω), coils-melt position (h) and the ratio of the melt height to length (H/L) numbers. Results demonstrate that the solute segregation tends to appear in the vicinity of solid/liquid (S/L) interface, the top of meniscus and the confluence of two eddies near the wall of meniscus. The solute segregation degree (Se=Cmax−CminC0) decreases with increasing Ha, which contributes to the augment of flow intensity in the melt. Moreover, the Se decreases linearly with increasing Rω owing to the intensive oscillation of melt flow. The enhanced EM coupling with increasing H/L results in the decrease of Se in the melt. However, the solute segregation in the corner of the meniscus gradually aggravates with increasing h, which results from the enlarging of lower eddies in the bulk of the melt. The solute segregation in the vicinity of S/L interface is strongly influenced by the scale and the flow intensity of lower eddies, which could change the phase transition path and morphology of crystal during directional solidification process. Larger value of Ha, Rω and H/L, as well as smaller h are beneficial to alleviate the solute segregation in the vicinity of S/L interface.

The Suppression of the Natural Convection in the Directional Solidification Processing of Superalloy by the Introduction of the Traveling Magnetic Field: 2d and 3d Simulation

Characteristics of Heat Transfer and Melt Flow in the Directional Solidification Process With a Traveling Magnetic Field for Multi-Crystalline Silicon Ingots

Computer Simulation of Solidification Transport Behaviours in Blade-Like Castings under Transverse Static Magnetic Fields Up to 25T

Directional Solidification Microstructure of a Ni-Based Superalloy: Influence of a Weak Transverse Magnetic Field

Numerical simulation of the effect of ultra-strong transverse static magnetic field upon the solidification transport behaviors of Ti alloy casting

Progress on High Magnetic Field-Controlled Transport Phenomena and Their Effects on Solidification Microstructure

Experimental and Numerical Investigation on Mass Transfer Induced by Electromagnetic Field in Cold Crucible Used for Directional Solidification

Effect of Horizontal Magnetic Field on the Microstructure of Directionally Solidified Ni-Based Superalloy

Global simulations of heat transfer in directional solidification of multi-crystalline silicon ingots under a traveling magnetic field

Effect of Electromagnetic Stirring on Fine Grain Formation and Tensile Property Improvement for Fe-Ni Superalloy

Effect of a Weak Transverse Magnetic Field on Solidification Structure During Directional Solidification

Tailoring Microstructure and Microsegregation in a Directionally Solidified Ni-Based SX Superalloy by a Weak Transverse Static Magnetic Field

Effect of Vertical High Magnetic Field on the Morphology of Solid-Liquid Interface during the Directional Solidification of Zn-2wt.%Bi Immiscible Alloy

Effect of Magnetic Field Configuration on Stray-Crystal Formation with Different Platform Sizes during Directional Solidification of Single-Crystal Superalloy

Effect of Multi-Scale Thermoelectric Magnetic Convection on Solidification Microstructure in Directionally Solidified Al-Si Alloys Under a Transverse Magnetic Field

Solute segregation behavior of nickel-based single crystal superalloys directionally solidified under transverse static magnetic field

Effect of a Transverse Magnetic Field on Solidification Structure in Directionally Solidified Al-40 Wt% Cu Alloys

Constitutional supercooling and corresponding microstructure transition triggered by high magnetic field gradient during directional solidification of Al-Fe eutectic alloy

Effect of a Transverse Magnetic Field on Solidification Structures in Unmodified and Sr-Modified Al-7wtpctSi Alloys During Directional Solidification

Dominant Dimensionless Parameters Controlling Solute Transfer During Electromagnetic Cold Crucible Melting and Directional Solidifying TiAl Alloys

Parameter Study of Traveling Magnetic Field for Control of Melt Convection in Directional Solidification of Crystalline Silicon Ingots