Abstract:A homogenized, supersaturated AlZnMgZr alloy was processed via severe plastic deformation (SPD) using a high-pressure torsion (HPT) technique for different revolutions at room temperature to obtain an ultrafine-grained (UFG) microstructure. The microstructure and mechanical properties of the UFG samples were then studied using transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and tensile and hardness measurements. The main purpose was to study the effect of shear strain on the evolution of the microstructure of the investigated alloy. We found a very interesting evolution of the decomposed microstructure in a wide range of shear strains imposed by HPT. While the global properties, such as the average grain size (~200 nm) and hardness (~2200 MPa) appeared unchanged, the local microstructure was continuously transformed. After 1 turn of HPT, the decomposed UFG structure contained relatively large precipitates inside grains. In the sample processed by five turns in HPT, the segregation of Zn atoms into grain boundaries (GBs) was also observed. After 10 turns, more Zn atoms were segregated into GBs and only smaller-sized precipitates were observed inside grains. The intensive solute segregations into GBs may significantly affect the ductility of the material, leading to its ultralow-temperature superplasticity. Our findings pave the way for achieving advanced microstructural and mechanical properties in nanostructured metals and alloys by engineering their precipitation and segregation by means of applying different HPT regimes.

Achieving Superplasticity In A Bi-Sn Alloy Processed By High-Pressure Torsion

The nanoscale mechanisms of strengthening and ductility enhancement in an Al–Mg–Si–Mn alloy on processing by high-pressure torsion

Microstructure Evolution during High-Pressure Torsion in a 7xxx AlZnMgZr Alloy

Exploiting tube high-pressure shearing to prepare a microstructure in Pb-Sn alloys for unprecedented superplasticity

Severe plastic deformation of two-phase TiNiCuNb shape memory alloy

Effects of Severe Plastic Deformation and Subsequent Annealing on Microstructures of a Ni50.6Ti49.4 Shape Memory Alloy

Microstructural Evolution and Mechanical Properties in Superlight Mg-Li Alloy Processed by High-Pressure Torsion

Evolution of microstructure and texture during severe plastic deformation of the aluminium alloy AA2099

Strength enhancement of an aluminum alloy through high pressure torsion

Mechanisms Behind the Superplastic Behavior of As-Extruded Tibw/Ti6al4v Composites with A Network Architecture

Ultra-High Strength in FCC+BCC High-Entropy Alloy via Different Gradual Morphology

Nano-scale Reinforcements and Properties of Al-Si-Cu Alloy Processed by High-Pressure Torsion

Microstructure and Mechanical Properties of Al-4Mg-0.3Cu Alloy after HPT and Postdeformation Annealing

Effect of High-Pressure Torsion Temperatures on the Precipitation and Properties of Cu-Cr Alloy

The Evolvement of Mechanical Properties and Microstructure of Commercial Aluminum Alloy 6061 via High-Pressure Torsion

Nanostructure and related mechanical properties of an Al-Mg-Si alloy processed by severe plastic deformation

The Evolutions of Microstructure, Texture and Hardness of A1050 Deformed by HPT at the Transition Area

Evolution of Microstructure and Mechanical Properties of an As-Cast Mg-8.2gd-3.8y-1.0zn-0.4zr Alloy Processed by High Pressure Torsion

EFFECT OF HIGH PRESSURE TORSION ON STRUCTURE AND MECHANICAL PROPERTIES OF Al–Ca–Cu ALLOY

Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion

Microstructural Evolution of Metastable Austenitic Steel During High-Pressure Torsion and Subsequent Heat Treatment