Abstract:As an all-inorganic solid state lighting material, phosphor-in-glass (PiG) receives much attention in high-power white lighting. However, poor heat-dissipation performance and low color rendering index (Ra) caused by low doping concentration of phosphor limit its application in white laser diodes (wLDs). Herein, phosphor-in-glass films on sapphire (PiFS) with heat-conducting properties and high Ra were newly synthesized via screen printing technology, which is highly desired for high-power wLEDs/wLDs. The interfacial corrosion product of CaWO4 between nitride phosphor (CaAlSiN3:Eu2+) and borosilicate glass (BS-glass) was found and investigated in detail firstly to determine the sintering temperature. Laminated structure of PiFS with red layer inside and green layer outside was intentionally designed to effectively avoid 'reabsorption' effect between the red and green emitting phosphors. Compared with the opposite laminated structure, the PiFS exhibited the higher luminance efficiency (LE) and better optical properties (Ra=85, CCT=5362, CIE= (0.3348, 0.3156)) in wLDs. Notably, the adjustable optical characteristics can be achieved by changing the concentration of phosphor, the number of printing layers and the driving current for the application of PiFS in wLED and wLDs. High quality white light in wLED with CIE coordinates (0.3679, 0.3648) was also acquired and showed the excellent color rendering property (Ra = 90.8) and low color correlated temperature (CCT = 4280 K). Further, the working temperature of PiFS stabilized at 47 °C when applied in wLDs (1 W), which greatly prevented the phenomenon of 'thermal quenching' for the phosphors caused by high temperature under high power LDs. Thus, high Ra PiFS prepared by this strategy has better heat dissipation and optical properties than PiG, indicating a prospective application in high-power white LEDs/LDs.

Luminous Efficacy Enhancement of Phosphor-in-glass Based White Light-Emitting Diodes Through Patterned Structure

High Efficiency All Phosphorescent White Light-Emitting Diodes Based on Conjugated Polymer Host

Reliable and Efficient Phosphor-in-Glass-Based Chip-Scale Packaging for High-Power White LEDs

Enhancing Optical Performance of Chip-Scale Packaged White LEDs by Phosphor-in-Glass With High-Reflective Dam

Improved optical properties of phosphors-in-glass through the optimal size distribution of glass powder

Laminated Structure of Phosphor-in-Glass Films on Sapphire with High Color Rendering Index and Heat-Conducting Properties for High-Power White LEDs/LDs

Broad-Band and Stable Phosphor-in-Glass Enabling Ultrahigh Color Rendering for All-Inorganic High-Power WLEDs

High Luminous Efficacy Phosphor-Converted Mass-Produced White LEDs Achieved by AlN Prebuffer and Transitional-Refraction-Index Patterned Sapphire Substrate

Highly Enhanced Luminescence Performance of LEDs Via Controllable Layer‐Structured 3D Photonic Crystals and Photonic Crystal Beads

A Novel Preparation of Special-Shaped Phosphors-in-Glass by Gel Casting with Isobam for High-Power WLEDs Lighting

Chromaticity-tunable phosphor-in-glass for long-lifetime high-power warm w-LEDs

Efficient Energy Transfer Within Dyes Encapsulated Metal–Organic Frameworks to Achieve High Performance White Light‐Emitting Diodes

Unique sandwich design of high-efficiency heat-conducting phosphor-in-glass film for high-quality laser-driven white lighting

Five-Surface Phosphor-in-Glass for Enhanced Illumination and Superior Color Uniformity in Large-View Scale LEDs

Design of Optical Structure for Chip-on-board Wafer Level Packaging LEDs

Unique sandwich and microstructure design of phosphor-in-glass film for high brightness laser-driven white lighting

Composition and structure design of three-layered composite phosphors for high color rendering chip-on-board light-emitting diode devices

Development of high luminous efficacy red-emitting phosphor-in-glass for high-power LED lighting systems using our original low Tg and Ts glass

Low-Yellowing Phosphor-in-Glass for High-Power Chip-on-board White LEDs by Optimizing a Low-Melting Sn-P-F-O Glass Matrix

Design of patterned sapphire substrates for GaN-based light-emitting diodes

Tailored efficient and reliable double luminescent layer hybrid WOLEDs via doping engineering