Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

3D curvature grinding path planning based on point cloud data

A novel path planning method of robotic grinding for free-form weld seam based on 3D point cloud

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

Point cloud 3D parent surface reconstruction and weld seam feature extraction for robotic grinding path planning

Vision-guided path planning and joint configuration optimization for robot grinding of spatial surface weld beads via point cloud

A Feedrate Planning Method for the NURBS Curve in CNC Machining Based on the Critical Constraint Curve

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

Study on Path Generation Method of Curved Surface Part for Ultrasonic Inspection

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

Algorithm of Real-Time Path Generation for Ultrasonic Inspection of Sculptured Surface

Robotic Trajectory Planning for Non-Destructive Testing Based on Surface 3D Point Cloud Data

A Method of Generating Spiral Tool Path for Direct Three-Axis Computer Numerical Control Machining of Measured Cloud of Point

A novel feature-guided trajectory generation method based on point cloud for robotic grinding of freeform welds

Non-equidistant Scanning Path Generation for the Evaluation of Surface Curvature in Metrological Scanning Probe Microscopes

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud

CAD-BASED PATH PLANNING FOR LINE LASER SCANNING OF CURVED SURFACE

Automatic Aluminum Alloy Surface Grinding Trajectory Planning of Industrial Robot Based on Weld Seam Recognition and Positioning

Smooth path generation method of laser cladding bit repair robot based on 3D automatic measurement of wear surface point cloud

Research on complex surface grinding path planning of grinding robot based on NX and Tecnomatix