Abstract:CO2 sequestration via mineralization of steel slag has received widespread attention due to its ability to achieve in-situ CO2 sequestration in steel industries and high-value utilization of steel slag. The final CO2 sequestration capacity of steel slag is closely related to the reaction parameters (i.e., reaction duration, reaction temperature, CO2vol concentration, and liquid-solid ratios) of mineralization. The reaction parameters may have synergistic effects on the ability of steel slag to sequestrate CO2. Therefore, the single-factor (one-factor-at-a-time) experimental strategy can't obtain optimal process parameters. Herein, response surface methodology and the Box-Behnken Design were employed in determining optimal conditions. It is found that the combined effects of CO2 concentration in combination with reaction temperature and liquid-solid ratio significantly influence the sequestration process (P = 0.0082 and P < 0.0001, respectively). Conversely, the combined effects of reaction duration with liquid-solid ratio and CO2 concentration were found to be less significant (P = 0.6905 and P = 0.6114, respectively). The reasons behind this observation can be ascribed to the focus of this research on the later stages of the reaction, during which it proceeds smoothly. Additionally, alterations in temperature, liquid-solid ratio, and CO2 concentration not only affect the initial pH, CO2 dissolution rate and quantity, and reaction kinetics but also alter the patterns of their collective impact on CO2 sequestration. The CO2 capture could reach 179.1 g-CO2/kg-steel slag at the optimal condition (i.e., 56.14 °C reaction temperature, 6.66 ml/g liquid-solid ratio, 44.53 wt.% CO2 concentration, and 286.73 mins reaction time), compared to single-factor stepwise optimization, which improves by about 9.84 %. Implementing this optimized mineralization process could enable the Chinese steel industry to capture an estimated 27.4 million tons of CO2 annually, based on an annual production of 153 million tons of steel slag.

CO 2 mineralization using basic oxygen furnace slag: process optimization by response surface methodology

Modeling and response surface methodology optimization of reaction parameters for aqueous mineral carbonation by steel slag

Enhanced Steelmaking Slag Mineral Carbonation in Dilute Alkali Solution

Venom of the stonefish Synanceja horrida (Linnaeus).

Mineral Carbonation of Basic Oxygen Furnace Slags

Mineral Sequestration of Co(2) Using Basic Oxygen Furnace (bof) Steelmaking Slag

A novel approach to accelerate carbon dioxide sequestration of ladle furnace slag using sodium bicarbonate solution

Accelerated carbonation and stabilization of BOF slag: data fitting relationship between particle size and CO2 sequestration

Performance of steel slag in carbonation–calcination looping for CO2 capture from industrial flue gas

An efficient molten steel slag gas quenching process: Integrating carbon solidification and waste heat recovery

Advanced Mineral Carbonation: An Approach to Accelerate CO2 Sequestration Using Steel Production Wastes and Integrated Fluidized Bed Reactor

Biophysical characterization of Bacillus licheniformis and Escherichia coli γ-glutamyltranspeptidases: A comparative analysis.

Mineral Carbonation of CO2 with Utilization of Coal Gasification Slags Based on Chemical Looping

Carbon Dioxide Capture and Product Characteristics Using Steel Slag in a Mineral Carbonation Plant

Co-treatment of Waste From Steelmaking Processes: Steel Slag-Based Carbon Capture and Storage by Mineralization

Research status and future challenge for CO2 sequestration by mineral carbonation strategy using iron and steel slag

Mechanism and process study on steel slag enhancement for CO2 capture by seawater

Direct Gas-Solid Carbonation Kinetics of Steel Slag and the Contribution to in Situ Sequestration of Flue Gas CO(2) in Steel-Making Plants.

Improving the Carbonation of Steel Slags Through Concurrent Wet Milling

Evaluation of the Carbon Sequestration Potential of Steel Slag in China Based on Theoretical and Experimental Labile Ca

Development of a Steel-Slag-Based, Iron-Functionalized Sorbent for an Autothermal Carbon Dioxide Capture Process.