Abstract:With the increase in computational costs driven by the use of artificial intelligence, enhancing the performance of semiconductor systems while improving efficiency has become an inevitable challenge. Due to the fine pitch limits of micro bumps, bumpless Cu-Cu bonding is emerging as the next-generation core technology. This study aims to analyze the effects of individual temperature and pressure on both large- and local-scale behaviors of material in the Cu-Cu bonding process with experiments and numerical analysis. The motivation of this study is to compensate the deficiencies in reported studies on process optimization, particularly the lack of exploration of the separated effects of temperature and pressure on large- and local-scale Cu-Cu bonding. Furthermore, reports on the thermodynamic modeling of Cu-Cu bonding behavior are not sufficient, making it challenging to find suitable models. Bonding experiments were performed by independently controlling the temperature and pressure using blank Cu films treated by precise chemical mechanical polishing (CMP) processes. The large-scale bonded area under each condition was measured, and transmission electron microscope (TEM) images were captured to observe the patterns of local void formation under various temperature and pressure conditions. In the experiments, it was observed that the temperature increase had a greater impact on the bonded area at a larger scale than the increase in pressure. However, for nanoscale-local voids, an increase in pressure had a more dominant effect. To discuss the experimental results, a thermodynamic modeling framework that considers coupled heat-induced deformation, plastic deformation, and volumetric changes caused by material flux was proposed. The proposed model has been implemented in the user-defined material subroutine (UMAT) of the ABAQUS program for finite element (FE) analysis. Numerical analysis using the proposed model captures the experimental data well. In large-scale simulations, temperature conditions have a significant impact, with plastic deformation being the primary mode of deformation, while the pressure conditions dominate the material flux, making substantial contributions to reducing voids at local-scale. To achieve complete closure of the void, the simulation demonstrated that maintaining a sufficient pressure gradient until the complete closure is required. The study findings provide an explicit understanding of how the temperature and pressure conditions differently affect large-scale bonding and local voids for semiconductor package manufacturing.

Analysis the Interface Delamination of Cu and Emc Adhesive Material in the Cutting Process of Electronic Chip Based on Cohesive Zone Modeling

Adhesion improvement of Cu-based substrate and epoxy molding compound interface by hierarchical structure preparation

Simulation and Experimental Analysis of Thermomechanical Stress Around Interconnects for W2W Hybrid Bonding

Al-clad Cu Bond Wires for Power Electronics Packaging: Microstructure Evolution, Mechanical Performance, and Molecular Dynamics Simulation of Diffusion Behaviors

The Effect Of Cu Orientation On Fracture Location In Cu3sn-Cu Interface Structure Under Monotonic Loading Condition By Molecular Dynamics Simulation

Study on Shear Strength and Jc of EMC/Cu Interface with Cu Oxidation and Moisture Absorption

Fracture analysis on die attach adhesives for stacked packages based on in-situ testing and cohesive zone model.

The Effect of Cu Orientation on Fracture Location in Cu<inf>3</inf>Sn-Cu Interface Structure Under Monotonic Loading Condition by Molecular Dynamics Simulation

Cohesive Properties of Bimaterial Interfaces in Semiconductors: Experimental Study and Numerical Simulation Using an Inverse Cohesive Contact Approach

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Numerical Simulation of Interfacial Delamination in Electronic Packaging

Study The Mixed-Mode Delamination Of The Epoxy/Cu Interface

The Effect of Pressure and Orientation on Cu-Cu3Sn Interface Reliability under Isothermal Ageing and Monotonic Traction Via Molecular Dynamics Investigation

Thermodynamic modeling framework with experimental investigation of the large-scale bonded area and local void in Cu-Cu bonding interface for advanced semiconductor packaging

Assessment of the Risk of Crack Formation at a Hybrid Bonding Interface Using Numerical Analysis

Study on the Mixed-Mode Fracture of the Epoxy-Cu Interface

Competing Behavior of Interface Delamination and Wafer Cracking During Peeling Film from Ultra-Thin Wafer

Analysis of Interfacial Peeling in IC Chip Pick-Up Process

Effects of Moisture Diffusion on a System-in-Package Module by Moisture–Thermal–Mechanical-Coupled Finite Element Modeling

Competing Fracture Modeling of Thin Chip Pick-Up Process

Study on failure mechanism of Cu-Polyethylene-Cu sandwich structure by molecular dynamics simulation