Abstract:In this paper, we present a cantilever-probe system excited by a piezoelectric actuator, and use it to measure the dynamic mechanical properties of a micro- and nanoscale fiber. Coupling the fiber to the free end of the cantilever probe, we found the dynamic stiffness and damping coefficient of the fiber from the resonance frequency and the quality factor of the fiber-cantilever-probe system. The properties of Bacillus subtilis fibers measured using our proposed system agreed with tensile measurements, validating our method. Our measurements show that the piezoelectric actuator coupled to cantilever probe can be made equivalent to a clamped cantilever with an effective length, and calculated results show that the errors of measured natural frequency of the system can be ignored if the coupled fiber has an inclination angle of alignment of less than 10 degrees. A sensitivity analysis indicates that the first or second resonant mode is the sensitive mode to test the sample's dynamic stiffness, while the damping property has different sensitivities for the first four modes. Our theoretical analysis demonstrates that the double-cantilever probe is also an effective sensitive structure that can be used to perform dynamic loading and characterize dynamic response. Our method has the advantage of using amplitude-frequency curves to obtain the dynamic mechanical properties without directly measuring displacements and forces as in tensile tests, and it also avoids the effects of the complex surface structure and deformation presenting in contact resonance method. Our method is effective for measuring the dynamic mechanical properties of fiber-like one-dimensional (1D) materials.

Direct measurement of torsional properties of single fibers

A New Micro-Tensile System for Measuring the Mechanical Properties of Low-Dimensional Materials - Fibers and Films

An optical torsion fiber sensor with simultaneous direction and angle measurement

A fiber-based torsion sensor with tunable sensitivity

Highly Sensitive Torsion Sensor Based on Triangular-Prism-shaped Long-Period Fiber Gratings

A novel torsion instrument for miniaturized components based on the flexural pivot

In-fiber Torsion and Temperature Measurement Based on Femtosecond-Laser-inscribed Eccentric Fiber Bragg Grating

In Situ SEM Torsion Test of Metallic Glass Microwires Based on Micro Robotic Manipulation

Robot-aided fN∙m torque sensing within an ultrawide dynamic range

Highly Sensitive Directional Torsion Sensor Based on a Helical Panda Fiber Taper

A Torsion Sensor Based on a Core-Deformed Long Period Fiber Grating

A Stable and Highly Sensitive Directional Torsion Sensor Based on a Helical Double Cladding Microstructured Multicore Fiber

FFT Algorithm-Assisted Polarimetric Twist Sensor

High-Sensitivity Microfiber Strain and Force Sensors

Microfiber optomechanical torsion sensor

Static micromechanical measurements of the flexural modulus and strength of micrometre-diameter single fibres using deflecting microcantilever techniques

High Sensitive Directional Torsion Sensor Based on a Segmented Long-Period Fiber Grating

Direction-Discriminating torsion sensor based on optical fiber Mach-Zehnder interferometer

Dynamic Characterization of Small Fibers Based on the Flexural Vibrations of A Piezoelectric Cantilever Probe

Simultaneous measurement of directional torsion and temperature by using a DC-sampled helical long-period fiber grating

High-throughput measurement of elastic moduli of microfibers by rope coiling