Abstract:Precision space inertial sensors are imperative to Earth geodesy missions, gravitational wave observations and several fundamental physics experiments in space. In these missions, the residual acceleration noise of the test mass(TM) caused by the forces from inertial sensor components and environment is supposed to be kept below a certain level. As a number of forces contributing to residual acceleration are related to actuation system, developing a precise actuation system to exclude any erroneous force and obtain an ultra sensitive value for TM acceleration noise is necessary and essential. However, it is difficult to test the actuation system on ground. In this paper, a torsion pendulum is established to test the influence of actuation system on TM torque noise and a closed-loop control system combined torsion pendulum and parts of actuation modules is designed to assess the performance of actuation control algorithm. The experimental results show that the parameters in an actuation system will introduce additional torque noise and the maximum noise can reach as much as 10^{-13}Nm /Hz^{1/2} at 1 mHz. The stable tracking error for the closed-loop system is about 10^{-7}, indicating that the combination system achieves good tracking performance and robustness for TM rotation control in different conditions of inertial sensors.

Improving the Measurement Sensitivity of Angular Deflection of A Torsion Pendulum by an Electrostatic Spring

Ground-Based Study of an Inertial Sensor with an Electrostatic-Controlled Torsion Pendulum

An improved magnetic properties measurement scheme using a torsion pendulum

Performance measurements of an inertial sensor with a two-stage controlled torsion pendulum

Improving the Sensitivity of a Torsion Pendulum by Using an Optical Spring Method

Measurement of the Effect of a Thin Discharging Wire for an Electrostatic Inertial Sensor with a High-Quality-factor Pendulum

A New Torsion Pendulum for Gravitational Reference Sensor Technology Development

Torsion Pendulum Apparatus for Ground Testing of Space Inertial Sensor

A Two-stage Electrostatic Controlled Torsion Pendulum Facility to Investigate Performances of an Inertial Sensor

Actuation system of the inertial sensor for high-precision space missions using torsion pendulum

Cross-Correlated Force Measurement for Thermal Noise Reduction in Torsion Pendulum

Actuation system for inertial sensors in high-precision space missions using a torsion pendulum

Electrostatic-control performance measurement of the inertial sensor with a torsion pendulum

Analysis and elimination of translation disturbance for patch effect measurement with a torsion pendulum

Progress of Ground Test of Inertial Sensor for Astrod I

Investigating Temperature-Induced Torque Noise of a Torsion Pendulum Based on Temperature Modulation at Different Frequencies.

Precision Improvement of Patch Potential Measurement in a Scanning Probe Equipped Torsion Pendulum.

Noise Limit of a Torsion Pendulum under Optomechanical Control

Coupling effect of vibrations and residual electrostatic force in short-range gravitational experiments

Measurement of Characteristic of Nonlinear Torsion Pendulum Based on Grating Sensor

Torsion Pendulum For The Performance Test Of The Inertial Sensor For Astrod-I