Abstract:Multi-frequency scanning near-field optical microscopy, based on a quartz tuning fork-probe (QTF-p) sensor using the first two orders of in-plane bending symmetrical vibration modes, has recently been developed. This method can simultaneously achieve positional feedback (based on the 1st in-plane mode called the low mode) and detect near-field optically induced forces (based on the 2nd in-plane mode called the high mode). Particularly, the high mode sensing performance of the QTF-p is an important issue for characterizing the tip-sample interactions and achieving higher resolution microscopic imaging but the related researches are insufficient. Here, we investigate the vibration performance of QTF-p at high mode based on the experiment and finite element method. The frequency spectrum characteristics are obtained by our homemade laser Doppler vibrometer system. The effects of the properties of the connecting glue layer and the probe features on the dynamic response of the QTF-p sensor at the high mode are investigated for optimization design. Finally, compared with the low mode, an obvious improvement of quality factor, of almost 50%, is obtained at the high mode. Meanwhile, the QTF-p sensor has a high force sensing sensitivity and a large sensing range at the high mode, indicating a broad application prospect for force sensing.

Analysis and elimination of translation disturbance for patch effect measurement with a torsion pendulum

Precision Improvement of Patch Potential Measurement in a Scanning Probe Equipped Torsion Pendulum.

A High Precision Surface Potential Imaging Torsion Pendulum Facility to Investigate Physical Mechanism of Patch Effect.

Coupling effect of vibrations and residual electrostatic force in short-range gravitational experiments

Improving the Measurement Sensitivity of Angular Deflection of A Torsion Pendulum by an Electrostatic Spring

Performance measurements of an inertial sensor with a two-stage controlled torsion pendulum

Torsion Pendulum Apparatus for Ground Testing of Space Inertial Sensor

Measurements of Temporal and Spatial Variation of Surface Potential Using A Torsion Pendulum and A Scanning Conducting Probe

A Low-Frequency Vibration Insensitive Pendulum Bench Based on Translation-Tilt Compensation in Measuring the Performances of Inertial Sensors

An improved magnetic properties measurement scheme using a torsion pendulum

Actuation system of the inertial sensor for high-precision space missions using torsion pendulum

Suspension losses in low-frequency mechanical pendulums

Electrostatic Effect Due to Patch Potentials Between Closely Spaced Surfaces

Cross-Correlated Force Measurement for Thermal Noise Reduction in Torsion Pendulum

Sensing Performance Analysis on Quartz Tuning Fork-Probe at the High Order Vibration Mode for Multi-Frequency Scanning Probe Microscopy.

Measuring ac Magnetic Susceptibility at Low Frequencies with a Torsion Pendulum for Gravitational-Wave Detection

Measurement of the Effect of a Thin Discharging Wire for an Electrostatic Inertial Sensor with a High-Quality-factor Pendulum

Investigating Temperature-Induced Torque Noise of a Torsion Pendulum Based on Temperature Modulation at Different Frequencies.

Thermal induced noise on test mass with copper alloy electrode housing for spaceborne gravitational wave detection

A New Torsion Pendulum for Gravitational Reference Sensor Technology Development

A Two-stage Electrostatic Controlled Torsion Pendulum Facility to Investigate Performances of an Inertial Sensor