Abstract:The composite thin film of graphene and PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrene sulfonate) is a promising candidate of hole transport layer and transparent conductive electrode materials for low-cost thin film devices. We use novel, fast, controllable and scalable ultrasonic substrate vibration-assisted spray coating (SVASC) method to fabricate high-performance graphene-PEDOT:PSS composite thin films. Graphene sheets are uniformly dispersed in aqueous PEDOT:PSS solution using sodium dodecyl sulfonate as surfactant. The fabricated graphene-PEDOT:PSS composite thin films exhibit excellent electrical and optical properties. The electrical conductivity of composite PEDOT:PSS thin films reaches 720 S/cm, which is increased about 10 times when 0.02 wt% of graphene is incorporated in the precursor solution. This remarkable enhancement is ascribed to the higher carrier mobility and carrier concentration, because graphene sheets bridge between the PEDOT:PSS rings via the strong pi-pi interaction acting as high-mobility channel. Also, the pi-pi interaction causes a reduction in the defect sites in PEDOT:PSS. Moreover, a mild drying temperature of 80 degrees C is favored, leading to better structural arrangement of graphene bridging between the polymer segments, and higher electrical conductivity. This work simplifies the solution-processing of graphene and uses a scalable casting technique, which paves the way for the commercialization of low-cost flexible electronic devices. (C) 2016 Elsevier B.V. All rights reserved.

Ultrasound-Aided Spray Casting For Graphene Oxide Deposition

Deposition Kinetics Of Graphene Oxide On Charged Self-Assembled Monolayers

Preparation of a Stable Graphene Dispersion with High Concentration by Ultrasound.

Novel Cyclic Ultrasound-Assisted Liquid Phase Exfoliation of Graphene in Deionized Water: A Parameter Study

Ultra-fast Self-Assembly and Stabilization of Reactive Nanoparticles in Reduced Graphene Oxide Films

Study on Preparation and Properties of the Graphene Functional Layer by the Spray Coating Method

A Non-Dispersion Strategy for Large-Scale Production of Ultra-High Concentration Graphene Slurries in Water

Assisted Tip Sonication Approach for Graphene Synthesis in Aqueous Dispersion

Improved Functionality of PEDOT:PSS Thin Films Via Graphene Doping, Fabricated by Ultrasonic Substrate Vibration-Assisted Spray Coating

Reliable Fabrication of Graphene Nanostructure Based on e-Beam Irradiation of PMMA/Copper Composite Structure

Primary Nucleation-Dominated Chemical Vapor Deposition Growth for Uniform Graphene Monolayers on Dielectric Substrate

Exfoliation and Spray Deposition of Graphene Nanoplatelets in Ethyl Acetate and Acetone: Implications for Additive Manufacturing of Low-Cost Electrodes and Heat Sinks

Uniform graphene oxide films fabrication via spray-coating for sensing application

A modified spin-casting approach for scalable preparation of ultra-thick reduced graphene oxide films with high thermal conductivity

Graphene Oxide “Surfactant”‐Directed Tunable Concentration of Graphene Dispersion

Investigation of Chemical Vapor Deposited Graphene Film on Oxide Substrate

Controllable Synthesis of Wafer‐Scale Graphene Films: Challenges, Status, and Perspectives

Ultrathin Oxide Films by Atomic Layer Deposition on Graphene

Graphene-enabled, directed nanomaterial placement from solution for large-scale device integration

Novel preparation of functionalized graphene oxide for large scale, low cost, and self-cleaning coatings of electronic devices

Optimization of Spray-Drying Process with Response Surface Methodology (RSM) for Preparing High Quality Graphene Oxide Slurry