Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

Dynamic Analysis of Piezo-Based Accelerometer with Asymmetric Gapped Cantilever Array

Micromachined Piezoresistive Accelerometers Based on an Asymmetrically Gapped Cantilever

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

Design and Simulation of A Novel Highly Symmetrical Piezoelectric Triaxial Accelerometer

Design and Characteristics of a Two-Axis Piezoelectric Accelerometer With Right Angle Cantilever Beam

Analysis and Design of a Novel Piezoresistive Accelerometer with Axially Stressed Self-Supporting Sensing Beams

Analysis On Twin-Mass Structure For A Piezoresistive Accelerometer

Simulation And Analysis Of Cantilever-Membrane Structure For Piezoresistive Micro-Accelerometers

Dynamic Characteristics Analysis of Piezoelectric Six-Degree-of-Freedom Accelerometer 1

A High-g Triaxial Piezoresistive Accelerometer with Sensing Beams in Pure Axial Deformation.

Design, Fabrication, and Characterization of a High-Performance Monolithic Triaxial Piezoresistive High-g Accelerometer

Design and Simulation for Tri-Axial Piezoresistive Mems Accelerometer

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

Analysis and Design for Piezoresistive Accelerometer Geometry Considering Sensitivity, Resonant Frequency and Cross-Axis Sensitivity

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

Design And Simulation Of A Novel Piezoresistive Accelerometer For High Accuracy And Overload Ability

Design and Fabrication of a Novel Piezoresistive Accelerometer

Design of a Piezoelectric Accelerometer with High Sensitivity and Low Transverse Effect

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

Design of a Triaxial Piezoelectric Accelerometer

Static Analysis of Thin Film Piezoelectric Micro-Accelerometer Using Analytical and Finite Element Modeling