Abstract:To reduce the number of sensors in the SCR catalyst, state feedback and fault diagnosis information are provided. Firstly, a model based on the coupling of flow, heat transfer, and gas-solid phase catalytic reaction in the SCR system is investigated in this paper. The parabolic partial differential equations are simplified by the variable substitution method and the method of lines approach (MOL). The simplified system of equations is solved by backward differentiation formulas (BDF) with adaptive adjustment time step strategy. Meanwhile, the chemical reaction parameters are accurately calibrated per second using the Levenberg-Marquardt method. Secondly, the ATS-UKF is designed in this paper, and to ensure the synchronisation between the ATS-UKF and the SCR model calculations, the time step of solving the BDF by the SCR model is taken as the time step of propagating the sigma points. Two observation scenarios are assumed: (1) no downstream NH 3 concentration sensor, ammonia coverage and downstream NH 3 concentration are observed by ATS-UKF; (2) no downstream NOx sensor, ammonia coverage and downstream NOx concentration are observed by ATS-UKF. Finally, the paper carries out bench tests. In the first case, the ammonia coverage obtained by the ATS-UKF reached 0.99 with respect to the model-calculated value R2. The mean absolute error (MAE) between the observed and experimental values of the ATS-UKF for the downstream NH 3 concentration was 2.76 ppm. In the second case, the ammonia coverage obtained by the ATS-UKF reached 0.99 with respect to the model-calculated value R2, and the MAE between the observed and experimental values of the ATS-UKF for the downstream NOx concentration was 1.53 ppm. Environmental Implication The Adaptive Time-Step Unscented Kalman Filtering (ATS-UKF) enhances urea Selective Catalytic Reduction (SCR) in diesel engines, improving environmental outcomes. This method minimizes sensor dependence, enabling more precise SCR system management and effective emission reduction. By advancing emission control technologies, ATS-UKF contributes to global air pollution mitigation efforts, supporting cleaner air and environmental sustainability. Its innovative approach in monitoring and predicting SCR performance marks a significant step towards eco-friendly diesel engine operation.

A State Observer Design Based On Ekf For Diesel Engine Urea-Scr System

Design of extended Kalman filter observer coupled to ammonia cross-sensitivity model for an SCR system

Robust Nonlinear Disturbance Observer Design for Estimation of Ammonia Storage Ratio in Selective Catalytic Reduction Systems

Simultaneous estimation of ammonia injection rate and state of diesel urea-SCR system based on high gain observer

Closed-Loop Control Strategy and State Estimator for Diesel Engine SCR After-Treatment System

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Adaptive time-step unscented kalman filtering (ATS-UKF) based observer design for urea selective catalytic reduction (SCR) performance of diesel engines

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

Square-root unscented Kalman filter for ammonia coverage ratio and input ammonia estimations in diesel-engine urea-SCR system

Luenberger-Sliding Mode Observer Based Backstepping Control for the SCR System in a Diesel Engine

Data-Based On-Board Diagnostics for Diesel Engine NOx-Reduction Aftertreatment Systems

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

A particle filter for ammonia coverage ratio and input simultaneous estimations in Diesel-engine SCR system

Data-Driven Modeling and UFIR-Based Outlet NO$_{x}$ Estimation for Diesel-Engine SCR Systems

Model-Based Estimation and Control System Development in a Urea-SCR Aftertreatment System

Research on cross sensitivity of NOx sensor and Adblue injection volume in accordance with the actual situation based on cubature Kalman filter

A fuzzy logic urea dosage controller design for two-cell selective catalytic reduction systems

Experimental Study of Urea-SCR System under Open-Loop Control Strategy

NO and NO2 Concentration Modeling and Observer-Based Estimation Across a Diesel Engine Aftertreatment System

Model-based Closed-loop Control of Urea SCR Exhaust Aftertreatment System for Diesel Engine

Model-based fault detecting strategy of urea-selective catalytic reduction (SCR) for diesel vehicles