Abstract:Soft grippers are receiving growing attention due to their compliance-based interactive safety and dexterity. Hybrid gripper with soft actuators enhanced by rigid constraints is receiving growing attention in soft gripper design. With rigid structural components actuated by soft actuators, they could achieve excellent grasping adaptability and payload while also being easy to model and control with conventional kinematics. However, existing works were mostly focused on achieving superior payload and perception with simple planar workspaces, resulting in far less dexterity compared with conventional grippers. In this work, we took inspiration from the human metacarpophalangeal (MCP) joint and proposed a new hybrid gripper design with eight independent muscles. It was shown that adding the MCP complexity was critical in enabling a range of novel features in the hybrid gripper, including in-hand manipulation, lateral passive compliance, as well as new control modes. A prototype gripper was fabricated and tested on our proprietary dual-arm robot platform with vision-guided grasping. With very lightweight pneumatic bellows soft actuators, the gripper could grasp objects over 20 times its weight with lateral compliance. Using the dual-arm platform, highly anthropomorphic dexterous manipulations were demonstrated using two hybrid grippers, from tug of war on a rigid rod to passing a soft towel between two grippers using in-hand manipulation. Matching the novel features and performance specifications of the proposed hybrid gripper, the underlying modeling, actuation, control, and experimental validation details were also presented, offering a promising approach to achieving enhanced dexterity, strength, and compliance in robotic grippers.

Guideline and Design of A Six-Dimensional Constraint Gripper

A Bioinspired Gripper with Sequential Motion and Mutable Posture Enabled by Antagonistic Mechanism

One-DOF six-bar space gripper with multiple operation modes and force adaptability

Design of Humanoid Robotic Hand Based on Link Underactuation

Kinematic and Dynamic Analysis of a Novel 5-DOF Multi-fingered Deployable Robotic Gripper

Design and Implementation of an Underactuated Gripper with Enhanced Shape Adaptability and Lateral Stiffness Through Semi-Active Multi-Degree-of-freedom Endoskeletons

Force Control Analysis Of Finger Grasping Constraint Based On Six-Axis Force Sensor

Design and Analysis of a New 6-DOF Deployable Parallel Manipulator with Scissor Legs

Design, Kinematics, and Prototyping of a Gripping Mechanism to Adapt Large Space

Design and Parameter Optimization of a Three-Claw Underastatctuated Gripper

Development of an Integrated Grapple Chain for a Simultaneous Three-Fingered End-Effector.

Six-DOF Micro-Manipulator Based on Compliant Parallel Mechanism with Integrated Force Sensor

A Soft-Rigid Hybrid Gripper With Lateral Compliance and Dexterous In-Hand Manipulation

Design and optimization of clamp–shear–grab integrated attachment

Design and Analysis of Underactuated Robotic Gripper with Adaptive Fingers for Objects Grasping Tasks.

Design and Development of a Composite Compliant Two-finger Gripper.

A 6-Dof Adaptive Parallel Manipulator with Large Tilting Capacity

Configuration Design of an Under-Actuated Robotic Hand Based on Maximum Grasping Space

A Structural Optimization Design Method of Planar Hybrid Gripper

Kinematic Design of a 3-DOF Force-controlled End-effector with Flexure Joints for Robotic Finishing Applications

6DLS: Modeling Nonplanar Frictional Surface Contacts for Grasping using 6D Limit Surfaces