Abstract:Transparent conducting electrodes are essential components for numerous flexible optoelectronic devices, including touch screens and interactive electronics 1 , 2 , 3 , 4 . Thin films of indium tin oxide—the prototypical transparent electrode material—demonstrate excellent electronic performances, but film brittleness, low infrared transmittance and low abundance limit suitability for certain industrial applications 1 , 4 , 5 . Alternatives to indium tin oxide have recently been reported and include conducting polymers 6 , carbon nanotubes 7 , 8 , 9 and graphene 10 , 11 , 12 . However, although flexibility is greatly improved, the optoelectronic performance of these carbon-based materials is limited by low conductivity 8 , 13 . Other examples include metal nanowire-based electrodes 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 , 22 , which can achieve sheet resistances of less than 10Ω □ −1 at 90% transmission because of the high conductivity of the metals. To achieve these performances, however, metal nanowires must be defect-free, have conductivities close to their values in bulk, be as long as possible to minimize the number of wire-to-wire junctions, and exhibit small junction resistance. Here, we present a facile fabrication process that allows us to satisfy all these requirements and fabricate a new kind of transparent conducting electrode that exhibits both superior optoelectronic performances (sheet resistance of ∼2Ω □ −1 at 90% transmission) and remarkable mechanical flexibility under both stretching and bending stresses. The electrode is composed of a free-standing metallic nanotrough network and is produced with a process involving electrospinning and metal deposition. We demonstrate the practical suitability of our transparent conducting electrode by fabricating a flexible touch-screen device and a transparent conducting tape.

Colossal Figure of Merit in Transparent‐Conducting Metallic Ribbon Networks

Solution-processing Metallic Networks with the Ultra-Low Sheet Resistance

Plasmonic Refraction‐induced Ultrahigh Transparency of Highly Conducting Metallic Networks

Nature‐Inspired Metallic Networks for Transparent Electrodes

Reduced graphene oxide nanoribbon networks: a novel approach towards scalable fabrication of transparent conductive films.

Highly Conductive Nanograting–Nanohole Structures with Tunable and Dual-Band Spectral Transparency

Bioinspired High‐Adhesion Metallic Networks as Flexible Transparent Conductors

High-Voltage Wave Induced a Unique Structured Percolation Network with a Negative Gauge Factor

Metallic Nanonetworks: A Practical ITO Replacement Strategy: Sputtering‐Free Processing of a Metallic Nanonetwork (adv. Mater. Technol. 8/2017)

A Transparent Electrode Based on a Metal Nanotrough Network.

Ruptured liquid metal microcapsules enabling hybridized silver nanowire networks towards high-performance deformable transparent conductors

A New Mechanism to Design Transparent Electrodes: Thz Realizations

Improved Flexible Transparent Conductive Electrodes based on Silver Nanowire Networks by a Simple Sunlight Illumination Approach

A New Method for Obtaining Transparent Electrodes.

High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process.

Multi-Resonator Structure Based on Continuous Silver Thin Films for Transparent Conductors

Nanoscale plasmonic wires with maximal figure of merits as a superior flexible transparent conducting electrode for RGB colors

Kill Two Birds with One Stone: Cracking Lithography Technology for High-Performance Flexible Metallic Network Transparent Conductors and Metallic Micronano Sheets

High conductivity and transparency metal network fabricated by acrylic colloidal self-cracking template for flexible thermochromic device

Computational Investigation of the Morphology, Efficiency, and Properties of Silver Nano Wires Networks in Transparent Conductive Film

In Situ Fabrication of Highly Conductive Metal Nanowire Networks with High Transmittance from Deep-Ultraviolet to Near-Infrared.