Modeling and PID control of quadrotor UAV based on machine learning
Lirong Zhou,Anton Pljonkin,Pradeep Kumar Singh
DOI: https://doi.org/10.1515/jisys-2021-0213
2022-01-01
Journal of Intelligent Systems
Abstract:Abstract The aim of this article was to discuss the modeling and control method of quadrotor unmanned aerial vehicle (UAV). In the process of modeling, mechanism modeling and experimental testing are combined, especially the motor and propeller are modeled in detail. Through the understanding of the body structure and flight principle of the quadrotor UAV, the Newton–Euler method is used to analyze the dynamics of the quadrotor UAV, and the mathematical model of the UAV is established under the small angle rotation. Process identifier (PID) is used to control it. First, the attitude angle of the model is controlled by PID, and based on this, the speed in each direction is controlled by PID. Then, the PID control of the four rotor aircraft with the center of gravity offset is simulated by MATLAB. The results show that the pitch angle and roll angle can be controlled by 5 degrees together without center of gravity deviation, and the PID can effectively control the control quantity and achieve the desired effect in a short time. Classical BP algorithm, classical GA-BP algorithm, and improved GA-BP algorithm were trained, respectively, with a total of 150 sets of training data, training function uses Levenberg-Marquardt (trainlm), and performance function uses mean squared error (MSE). In the background of the same noise, the improved GA-BP algorithm has the highest detection rate, classical GA-BP algorithm is the second, and classical BP algorithm is the worst. The simulation results show that the PID control law can effectively control the attitude angle and speed of the rotor UAV in the case of center of gravity deviation.