Abstract:Purpose The purpose of this study is to design a flight control model for a control surface-less (CSL) tri-tilt-rotor (TTR) unmanned aerial vehicle (UAV) based on a Proportional Integral Derivative (PID) controller to stabilize the altitude and attitude of the UAV subjected to various flying conditions. Design/methodology/approach First, the proposed UAV with a tilting mechanism is designed and analyzed to obtain the aerodynamic parameters. Second, the dynamics of the proposed UAV are mathematically modeled using Newton-Euler formation. Then, the PID controller is implemented in the simulation model to control flight maneuvers. The model parameters were implemented in a mathematical model to find the system’s stability for various flight conditions. The model was linearized to determine the PID gain values for vertical take-off and landing, cruise and transition mode. The PID controller was tuned to obtain the desired altitude and attitude in a short period. The tuned PID gain values were implemented in the PID controller and the model was simulated. Findings The main contribution of this study is the mathematical model and controller for a UAV without any control surface and uses only a thrust vector control mechanism which reduces the complexity of the controller. The simulation has been carried out for various flight conditions. The altitude PID controller and the attitude PID controller for CSL-TTR-UAV were tuned to obtain desired altitude and attitude within the optimum duration of 4 s and deviation in the attitude of 8%, which is within the allowable limit of 14%. The findings obtained from the simulation revels that the altitude and attitude control of the CSL-TTR-UAV was achieved by controlling the rpm of the rotor and tilt angle using the PID controller. Originality/value A novel CSL TTR UAV mathematical model is developed with a dual tilting mechanism for a tail rotor and single axis tilt for the rotors in the wing. The flight control model controls the UAV without a control surface using a PID controller for the thrust vector mechanism.

Design of flight control system of Quad Tilt Rotor UAV based on PID algorithm

A Gradient Optimization Based PID Tuning Approach on Quadrotor

Integral Backstepping-based Nonlinear Flight Control Strategy for Quadrotor Aerial Robot with Unknown Mass

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

An Application of Fuzzy PID Algorithm on Unmanned Helicopter Attitude Control

Research on PID Control of Quadrotor Drones Based on MATLAB

Controller design for transition flight of rotor-driven VTOL fixed-wing UAV based on PID

Design of fuzzy PID control system for quad-rotor UAV based on particle swarm algorithm under wind disturbance conditions

Study on Dynamic Balance PID Control Algorithm and Its Application on the Quadrotor

Quadrotor Aircraft Design Based on the K60 Controller

Research on Quadrotor Control Based on Genetic Algorithm and Particle Swarm Optimization for PID Tuning and Fuzzy Control-Based Linear Active Disturbance Rejection Control

A review of research on the control of quadrotor UAVs based on deep learning PID algorithm

Modeling and PID control of quadrotor UAV based on machine learning

System Design of a Novel Tilt-Roll Rotor Quadrotor UAV

Application of PID Simulation Control Mode in Quadrotor Aircraft

Achieving stable trajectory tracking in complex environments using an adaptive PID control strategy-based quadcopter drone

A Robust Adaptive PID-like Controller for Quadrotor Unmanned Aerial Vehicle Systems

Design and Simulation of the Control Algorithm for Vehicles of Geophysical Exploration

H2 Optimized PID Control of Quad-Copter Platform with Wind Disturbance

Design, modeling and simulation of a control surface-less tri-tilt-rotor UAV

Review of PID Controller Applications for UAVs