Ab Initio Prediction of A Silicene and Graphene Heterostructure As an Anode Material for Li- and Na-Ion Batteries

L. Shi,T. S. Zhao,A. Xu,J. B. Xu

DOI: https://doi.org/10.1039/c6ta06976b

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:The heterostructure of silicene and graphene can serve as a promising anode material for lithium- and sodium-ion batteries.

What problem does this paper attempt to address?

Synergistic Double-Shell Coating of Graphene and Li4SiO4 on Silicon for High Performance Lithium-Ion Battery Application

Qing Ai,Peng Zhou,Wei Zhai,Xiaoxin Ma,Guangmei Hou,Xiaoyan Xu,Lina Chen,Deping Li,Long Chen,Lin Zhang,Pengchao Si,Jinkui Feng,Qijin Chi,Lijie Ci

DOI: https://doi.org/10.1016/j.diamond.2018.06.023

IF: 3.806

2018-01-01

Diamond and Related Materials

Abstract:We demonstrate that the double-shell coating of graphene and Li4SiO4 on commercial Si nanoparticles as an effective strategy for improving the anode of lithium ion batteries to overcome the two critical concerns, i.e. rapid capacity decay and inferior coulombic efficiency caused by the large-volume changes. It is proven that the double-shell coating enables the formation of a stable hybrid solid electrolyte interphase, leading to much higher coulombic efficiency and longer cycling stability of the Si anodes. Furthermore, the rate performance of Si is significantly enhanced by the outstanding electrical conductivity of inner graphene layers and the excellent ionic conductivity of Li4SiO4 out-shell. The overall results suggest that this new strategy holds promising perspectives in optimizing electrochemical performances of Si anodes, which should promote their practical applications for next-generation lithium ion batteries with increasingly demanded energy density.
Combination of silicene and boronene as a potential anode material for high-performance lithium-ion batteries: Insights from first principles

Hai-Lin Ren,Yang Su,Shuai Zhao,Cheng-Wei Li,Xiao-Min Wang,Bo-Han Li,Bo-Wen Zhang

DOI: https://doi.org/10.1016/j.heliyon.2024.e37008

IF: 3.776

2024-08-27

Heliyon

Abstract:Material design is essential for the development and preparation of new materials. In this paper, a new two-dimensional heterostructure material (B@Si) consisting of boronene and silicene is designed and used as an anode material for lithium-ion batteries in order to improve the performance of lithium-ion batteries, and the structural properties, stability, electronic properties, and performance as an anode material for lithium-ion batteries are systematically investigated by first-principle calculations of the B@Si heterostructure. The results show that the B@Si heterostructure is energetically, thermodynamically and dynamically stable, and although the Dirac cone in the energy band structure of silicene disappears after the formation of the heterojunction, the overall electrical conductivity of the material improves considerably and the electron transport rate is faster. Due to the synergistic effect, Li has more stable adsorption sites and lower diffusion barriers than boronene and silicene in the B@Si heterostructure, higher theoretical specific capacity (1208 mAhg-1), and stronger mechanical properties (C11 = 296.6 N/m, C22 = 142.8 N/m). The volume expansion in the fully lithiated state is also only 8 %. These advantages indicate that B@Si heterostructures are good potential anode materials for high-performance Li-ion batteries.
Silicon Nanoparticles Coated with Nanoporous Carbon As a Promising Anode Material for Lithium Ion Batteries

Hang Xu,Mingtao Ding,Dongni Li,Yu Liu,Yinshan Jiang,Fangfei Li,Bing Xue

DOI: https://doi.org/10.1039/d0nj03918g

IF: 3.3

2020-01-01

New Journal of Chemistry

Abstract:As a promising anode candidate, silicon (Si) nanoparticles have been widely studied for use in lithium ion batteries.
Ab Initio Prediction of Two-Dimensional Si3C Enabling High Specific Capacity As an Anode Material for Li/Na/K-ion Batteries

Yanning Wang,Yinshi Li

DOI: https://doi.org/10.1039/c9ta11589g

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Anode materials that possess similar electronic structures but larger lattice parameters in comparison with graphene usually show higher theoretical specific capacities for Li/Na/K-ion batteries. Herein, density functional theory (DFT) calculations are applied to evaluate the working performances of a two-dimensional Si3C monolayer with larger bond lengths than graphene. The negative adsorption energies of Li/Na/K atoms on the surface of the Si3C monolayer avoid the appearance of dendrites. With the intercalation of Li/Na/K atoms, the Si3C monolayer exhibits a puckered structure instead of its initial planar structure, lowering the diffusion energy barrier of Li/Na/K atoms. The theoretical specific capacities for Li, Na and K-ion batteries are estimated to be as high as 1394, 1115 and 836 mA h g(-1), corresponding to the stoichiometries of Li5Si3C, Na4Si3C and K3Si3C, respectively. The average open circuit voltages (OCVs) for Li/Na/K-ion batteries are 0.58 V, 0.50 V and 0.71 V, respectively. The density of states (DOS) calculation reveals that the Si3C monolayer is semimetallic and its electronic conductivity can be enhanced by the intercalation of alkali metal atoms. In Li, Na and K-ion batteries, it is found that the maximum variations of lattice parameters of the Si3C monolayer are 3.54%, 2.69% and 2.24%, respectively. All the desirable properties indicate that the Si3C monolayer is a promising anode material for Li/Na/K-ion batteries. It also suggests that silicene doped with moderate carbon or some other elements is a potential anode material for alkali metal-based batteries.
Ab initio prediction of two-dimensional Si3C enabling high specific capacity as an anode material for Li/Na/K-ion batteries

Yanning Wang,Yinshi Li

DOI: https://doi.org/10.1039/c9ta11589g

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:A two-dimensional Si3C monolayer possessing excellent theoretical specific capacities and conductivities guarantees great potential for anode application in Li/Na/K-ion batteries.
Lithiation and Sodiation of Hydrogenated Silicene: A Density Functional Theory Investigation

Javed Rehman,Xiaofeng Fan,Abdus Samad,Weitao Zheng

DOI: https://doi.org/10.1002/cssc.202101742

IF: 8.4

2021-11-05

ChemSusChem

Abstract:The next-generation renewable energy machineries necessitate electrodes with appropriate electrochemical performance. Here, we scrutinize the anodic properties of silicane for Li- and Na- ion batteries employing first principle calculations. The projected single layer hydrogen functionalized Si (Si2H2 ) structure is energetically, mechanically, dynamically, and thermally stable based on theoretical simulations, confirming its experimental feasibility. The electronic properties reveal semiconducting nature of silicane on the basis of PBE and HSE06 schemes with an indirect band gap. As anode material for Li- and Na- ion batteries, hydrogenated silicene is showing promising electrochemical performance because of the proper adsorption strength between Si2H2 and the adsorbed Li and Na. The average open circuit voltages for LixSi2H2 and NaxSi2H2 are as low as 0.42 V and 0. 64 V, while its specific capacity is as high as 921 and 1842 mAhg-1 for Li and Na, individually. It also shows the ultra-fast diffusion channels for Li and Na ions. The diffusion barriers for Li and Na migrations are as low as 0.18 eV and 0.14 eV, respectively which reveals rapid charge/discharge processes using hydrogenated silicene as anode. These important features facilitate silicane as favorable anode material for Li/Na- ion batteries.

chemistry, multidisciplinary,green & sustainable science & technology
First-principles study on the synergistic mechanism of SnO 2 and 2 graphene as a lithium ion battery anode 3

Ling Miao,Jiangbin Wu,Jianjun Jiang,Pei Liang

2012-01-01

Abstract:7 ABSTRACT: Using first-principles calculations, we inves8 tigated the effect of the synergistic mechanism on the 9 properties of a SnO2 and graphene hybrid structure, including 10 the stability, electronic, and Li diffusion performance. The 11 stable interface formed by C−O covalent bonds not only 12 improves the structural stability but also makes the hybrid 13 structure more conductive than the semiconducting SnO2. The 14 calculated binding energies and diffusion barriers show that Li 15 tends to insert into the interface, and a new pathway along the
Heterogeneous Interface-Derived Engineered Electronic Structure of SiO with Enhanced Lithium Storage

Shuai Wang,Yanyan Cao,Jian Qin,Linzhe Wang,Quan Xu,Wenbin Li,Wei Xiao,Huijuan Yang,Chong Xie,Gaini Zhang,Yangyang Luo,Jingjing Wang,Xifei Li

DOI: https://doi.org/10.1021/acsaem.1c03232

IF: 6.4

2021-01-01

ACS Applied Energy Materials

Abstract:Constructing a heterogenous structure has always been one of the effective strategies to improve the electrochemical performance of anode materials for lithium-ion batteries (LIBs). As a semiconductor material, wide band gaps and high charge transfer resistance of SiO greatly affect the electron conduction and ion diffusion during lithium storage. Unfortunately, few studies have focused on SiO-based heterogenous interface engineering to improve its battery performance. In this work, a simple chemical vapor deposition strategy is utilized to fabricate Se-coated m-SiO (mSiO@Se) as an anode for LIBs. Combining first-principles calculations and experimental results, it is revealed that the heterogenous interface formed between SiO and Se is highly functional in optimizing the energy band structure and promoting the Li+ diffusion kinetics, which boost electron and ion conduction of SiO with enhanced lithium storage. This research provides a reliable direction and theoretical support for the future development of interface engineering in electrochemical energy storage.
Novel Design of Uniform Si@graphite@C Composite As High-Performance Li-ion Battery Anodes

Sijia Zhu,Yangfan Lin,Zhilin Yan,Jingwei Jiang,Deren Yang,Ning Du

DOI: https://doi.org/10.1016/j.electacta.2021.138092

IF: 6.6

2021-01-01

Electrochimica Acta

Abstract:We design a novel Si@graphite@C composite via the pretreatment of graphite, subsequent deposition of Si nanoparticles via chemical vapor deposition, and finally the coating of carbon layer. The enlarged macropores of graphite can accommodate more loading of Si nanoparticles and the use of monosilane gas as source can bring the uniform deposition of Si nanoparticles in the whole graphite microparticles. The Si@graphite@C composite has good electrical conductivity and can well accommodate the volume change during the charge/discharge process, thus result in a good electrochemical performance. The relationship between pore size distribution, Si particles distribution and electrode performance is also investigated. (c) 2021 Published by Elsevier Ltd.
First-Principle Study of a ZnS/Graphene Heterostructure as a Promising Anode Material for Lithium-Ion Batteries

Shihao Feng,Zhixing Wang,Huajun Guo,Xinhai Li,Guochun Yan,Jiexi Wang

DOI: https://doi.org/10.1021/acs.energyfuels.1c03664

2021-12-08

Abstract:Properties of ZnS/graphene, such as formation energy of the Li adatom, activation energy for Li diffusion, pseudocapacity-like storage, and density of state (DOS), render ZnS/graphene a suitable anode material for a rechargeable lithium-ion battery. Lithium storage sites, migration paths, electronic conductivity, and storage sequence of lithium ions are clarified. Lithium ions preferentially embed the ZnS/graphene heterostructure interface and the surface of ZnS and then intercalate into the bulk phase of ZnS. In the ZnS bulk, Li ions diffuse by the T–O–T path, and the activation energy diseases with volume expanded. LiS4 and ZnS2 are produced with ZnS lithiation, besides Li x Zn and Li2S. Moreover, it is proven that the capacity of ZnS/graphene more than the sum of ZnS and graphene originates from the interfacial lithium storage via the pseudocapacity-like storage mechanism. Therefore, further increasing the contact area between ZnS and graphene could promote the capacity by reducing the ZnS particle size.

energy & fuels,engineering, chemical
First-principles study on the synergistic mechanism of SnO2 and graphene as a lithium ion battery anode

Ling Miao,Jiangbin Wu,Jianjun Jiang,Pei Liang

DOI: https://doi.org/10.1021/jp306572c

2013-01-01

Abstract:Using first-principles calculations, we investigated the effect of the synergistic mechanism on the properties of a SnO2 and graphene hybrid structure, including the stability, electronic, and Li diffusion performance. The stable interface formed by C-O covalent bonds not only improves the structural stability but also makes the hybrid structure more conductive than the semiconducting SnO2. The calculated binding energies and diffusion barriers show that Li tends to insert into the interface, and a new pathway along the SnO2(110) direction for Li rapid diffusion with a low barrier is found.
Organic salts with unsaturated bond and diverse anions as substrates for solid electrolyte interphase on graphite anodes

Shuai Heng,Linze Lv,Yunhao Zhu,Jie Shao,Weibo Huang,Fu Long,Qunting Qu,Honghe Zheng

DOI: https://doi.org/10.1016/j.carbon.2021.06.069

IF: 10.9

2021-01-01

Carbon

Abstract:The electrochemical performance of lithium ion batteries is closely related to the solid electrolyte interphase (SEI) film formed on anode surface. Despite the widespread commercialization of graphite anodes, SEI still suffers from unsatisfactory stability, leading to gradual loss of active lithium ions and capacity degradation of batteries. Here organic small molecular salts with unsaturated bonds and diverse anions are coated on graphite particles and work as substrates to form a modified SEI. The C=C double bond-containing organic salts, sodium acrylate (SA), sodium vinylsulfonate (SVS) and vinyl sodium phosphate (VSP), possessing carboxylate, sulfonate and phosphate groups, respectively, are rationally selected and their effects on the SEI and electrochemical properties of graphite anodes are systematically investigated. SVS modified graphite generates a SEI film with high flexibility, good compactness and lithium ions conductivity owning to the in-situ polymerization of carbon double bonds and polarity of ionic sulfonate groups. Accordingly, the first coulombic efficiency, rate capability and cycle life of graphite anodes are improved in both half cell and LiNi0.6Co0.2Mn0.2O2-based full cell testing. (C) 2021 Elsevier Ltd. All rights reserved.
An Ab Initio Study of Lithization of Two-Dimensional Silicon–Carbon Anode Material for Lithium-Ion Batteries

Alexander Galashev,Alexey Vorob'ev

DOI: https://doi.org/10.3390/ma14216649

IF: 3.4

2021-11-04

Materials

Abstract:This work is devoted to a first-principles study of changes in the structural, energetic, and electronic properties of silicene anodes during their lithium filling. Anodes were presented by silicene on carbon substrate and free-standing silicene. The ratio of the amount of lithium to silicon varied in the range from 0.06 to 1.125 for silicene on bilayer graphene and from 0.06 to 2.375 for free-standing silicene. It is shown that the carbon substrate reduces the stability of the silicene sheet. Silicene begins to degrade when the ratio of lithium to silicon (NLi/NSi) exceeds ~0.87, and at NLi/NSi = 0.938, lithium penetrates into the space between the silicene sheet and the carbon substrate. At certain values of the Li/Si ratio in the silicene sheet, five- and seven-membered rings of Si atoms can be formed on the carbon substrate. The presence of two-layer graphene imparts conductive properties to the anode. These properties can periodically disappear during the adsorption of lithium in the absence of a carbon substrate. Free-standing silicene adsorbed by lithium loses its stability at NLi/NSi = 1.375.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Theoretical studies of SiC van der Waals heterostructures as anodes of Li-ion batteries

Xiaojie He,Anwen Tang,Yi Li,Yongfan Zhang,Wenkai Chen,Shuping Huang

DOI: https://doi.org/10.1016/j.apsusc.2021.150269

IF: 6.7

2021-10-01

Applied Surface Science

Abstract:By using density functional theory (DFT), the potential of two dimensional SiC, SiC with Stone-Wales defect (SW-SiC) and their van der Waals heterostructures with graphene (SiC/graphene and SW-SiC/graphene) as anode materials have been investigated, including corresponding geometry structural changes, electronic structures, Li+ diffusion property and related electrochemical properties during charging. Comparing with SiC monolayer, SW-SiC possesses better electric conductivity as well as the Li adsorption properties. By introduction of graphene, SiC/graphene and SW-SiC/graphene heterostructures present excellent electronic conductivity, lower anode voltage and higher specific capacity for the introduction of build-in electric field. Their maximum theoretical capacity both could reach as high as 1229.91 mAh/g, three times more than that of graphite (370 mAh/g), along with a small change of interlayer spacing. The lithiation open-circuit voltage ranges of those heterostructures are also appropriate to be used as anode materials. Besides, the calculated diffusion barriers of Li ions in the interlayer of SiC/graphene and SW-SiC/graphene heterostructures are comparable to those of several graphene heterostructures and are lower than that for SW-SiC. This research illustrated that the deployment of heterojunction in electrode materials can greatly improve the electrochemical performance and endow experimental synthesis with new perspective.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
2D Ca2N/silicene Donor-Acceptor Heterostructure with Interstitial Anionic Electrons As Anode Material for Lithium-Ion Batteries

Xiaowei Jiang,Wenjun Tang,Xiaobin Niu,Haiyuan Chen

DOI: https://doi.org/10.1016/j.mtcomm.2024.109087

IF: 3.8

2024-01-01

Materials Today Communications

Abstract:Two-dimensional (2D) donor-acceptor (D-A) heterostructures with strong bonding interfaces have recently attracted widespread attention due to their promoted catalytic and lithium/sodium storage properties compared with traditional van der Waals heterostructures. The utilization of 2D electride as a proficient donor material presents auspicious possibilities in the realm of anode material development for lithium-ion batteries (LIBs) due to the presence of excess interstitial anionic electrons (IAEs). In this work, through first-principles calculations, we propose a Ca2N/silicene D-A heterostructure as an anode material for LIBs. The Ca2N/silicene heterostructure exhibits metallic properties and structural integrity without structural deformation and large lattice expansion during lithiation. Compared to monolayer silicene, the migration barriers of lithium ion on the surface of heterostructure decrease by about 50% (from 0.23eV to 0.12eV), implying rapid charge/discharge process. Notably, the IAE states contribute to the adsorption behavior of more lithium ions and prevent the formation of dendritic deposits. Moreover, the variation in the work function of each layer results in the emergence of inherent dipoles in Ca2N/silicene heterostructure, thereby effectively augmenting the capacity for multilayer lithium storage and ion transport. All findings indicate that the Ca2N/silicene D-A heterostructure with IAE states is a promising LIBs anode material.
Heterostructured SnS-ZnS@C Hollow Nanoboxes Embedded in Graphene for High Performance Lithium and Sodium Ion Batteries

Yu Zhang,Pengxiang Wang,Yanyou Yin,Xinyu Zhang,Lishuang Fan,Naiqing Zhang,Kening Sun

DOI: https://doi.org/10.1016/j.cej.2018.09.131

IF: 15.1

2019-01-01

Chemical Engineering Journal

Abstract:Metal sulfides are promising anode materials for lithium ion batteries (LIBs) and sodium ion batteries (SIBs) owing to their high theoretical capacity and good reaction reversibility upon lithiation/delithiation and sodiation/desodiation. However, the practical application of metal sulfides is severely hindered by its poor conductivity and huge volume change during cycling. Herein, a three dimensional hierarchical architecture is rational designed and synthesized through incorporating ZnS-SnS heterostructure encapsulated by carbon shell into graphene matrix. The interconnected conductive networks from the graphene skeleton and outer coating carbon can not only provide a high efficient transfer path for electron and ion, but also accommodate the volume variation effectively upon charging/discharging. Additionally, the in-situ constructed ZnS-SnS heterostructures provide extra charge transfer driving force because of a built-in electric field. Consequently, the as obtained ZnSSnS@C hollow nanoboxes wrapped by grpahene show high specific capacity, long cycle lifetime and excellent rate performance when applied for anodes of LIBs and SIBs.
Constructing Janus SnSSe and Graphene Heterostructures As Promising Anode Materials for Li‐ion Batteries

Wenxue Zhang,Jiahui Zhang,Cheng He,Tongtong Li

DOI: https://doi.org/10.1002/er.6519

IF: 4.6

2021-01-01

International Journal of Energy Research

Abstract:Developing efficient anode materials for Li-ion batteries is becoming increasingly important but is still challenging to collect relevant information about their adsorption and diffusion. Herein, by means of density functional theory (DFT) computations, the Janus SnSSe, and graphene van der Waals heterostructures (ie, SSnSe/G and SeSnS/G) are systematically investigated by first principles calculations, aiming at constructing promising anode materials for Li-ion batteries (LIBs). The results have demonstrated that the SnSSe/G heterostructures exhibits a semimetal-to-metal transition after incorporating Li, indicating enhanced conductivity compared to monolayer Janus SnSSe or graphene. Moreover, the SnSSe/G heterostructures can maintain favorable structural stability and ultrahigh stiffness well after applying the strain or adsorption of lithium atoms, thereby ensuring the pulverization resistance. In addition, the energy barriers of Li atoms diffusion are very low, which are expected to achieve a fast charge/discharge rate. Meanwhile, the estimated storage capacity of Li on SnSSe/G heterostructures could achieve 472.66 mA h g(-1), which greatly improves the storage capacity. These interesting results show that Janus SnSSe/G heterostructures could be used as excellent anode materials for LIBs.
High-performance Self-Organized Si Nanocomposite Anode for Lithium-Ion Batteries

Xiuyun Zhao,Dingguo Xia,Lin Gu,Juncheng Yue,Biao Li,Hang Wei,Huijun Yan,Ruqiang Zou,Yingxia Wang,Xiayan Wang,Ze Zhang,Jixue Li

DOI: https://doi.org/10.1016/s2095-4956(14)60150-9

2014-01-01

Abstract:Silicon is being investigated extensively as an anodic material for next-generation lithium ion batteries for portable energy storage and electric vehicles. However, the large changes in volume during cycling lead to the breakdown of the conductive network in Si anodes and the formation of an unstable solid-electrolyte interface, resulting in capacity fading. Here, we demonstrate nanoparticles with a Si@Mn22.6Si5.4C4@C double-shell structure and the formation of self-organized Si-Mn-C nanocomposite anodes during the lithiation/delithiation process. The anode consists of amorphous Si particles less than 10 nm in diameter and separated by an interconnected conductive/buffer network, which exhibits excellent charge transfer kinetics and charge/discharge performances. A stable specific capacity of 1100 mAhg(-1) at 100 m.A.g(-1) and a coulombic efficiency of 99.2% after 30 cycles are achieved. Additionally, a rate capacity of 343 mAh.g(-1) and a coulombic efficiency of 99.4% at 12000 mA.g(-1) are also attainable. Owing to its simplicity and applicability, this strategy for improving electrode performance paves a way for the development of high-performance Si-based anodic materials for lithium ion batteries.
Ab Initio Study of the Electronic Properties of a Silicene Anode Subjected to Transmutation Doping

Alexander Y Galashev,Alexey S Vorob'ev

DOI: https://doi.org/10.3390/ijms24032864

2023-02-02

Abstract:In the present work, the electronic properties of doped silicene located on graphite and nickel substrates were investigated by first-principles calculations method. The results of this modeling indicate that the use of silicene as an anode material instead of bulk silicon significantly improves the characteristics of the electrode, increasing its resistance to cycling and significantly reducing the volume expansion during lithiation. Doping of silicene with phosphorus, in most cases, increases the electrical conductivity of the anode active material, creating conditions for increasing the rate of battery charging. In addition, moderate doping with phosphorus increases the strength of silicene. The behavior of the electronic properties of doped one- and two-layer silicene on a graphite substrate was studied depending on its number and arrangement of phosphorus atoms. The influence of the degree of doping with silicene/Ni heterostructure on its band gap was investigated. We considered the single adsorption of Li, Na, K, and Mg atoms and the polyatomic adsorption of lithium on free-standing silicene.
Graphene/Carbon-Coated Si Nanoparticle Hybrids As High-Performance Anode Materials for Li-Ion Batteries

Min Zhou,Tingwei Cai,Fan Pu,Hao Chen,Zhao Wang,Haiyong Zhang,Shiyou Guan

DOI: https://doi.org/10.1021/am400521n

IF: 9.5

2013-01-01

ACS Applied Materials & Interfaces

Abstract:Si is regarded as one of the most promising anode materials for next generation Li-ion batteries, but it usually exhibits poor cycling stability due to the low intrinsic electrical conductivity and huge volume change induced by the alloying reaction with Li. In this study, we present a double protection strategy by fabricating graphene/carbon-coated Si nanoparticle hybrids to improve the electrochemical performance of Si in Li storage. The Si nanoparticles are wrapped between the graphene and the amorphous carbon coating layers in the hybrids. The graphene and the amorphous carbon coating layers work together to effectively suppress the aggregation and destruction of Si nanoparticles, keeping the overall electrode highly conductive and active in Li storage. As a result, the produced graphene/carbon-coated Si nanoparticle hybrids exhibit outstanding reversible capacity for Li storage (902 mAh g(-1) after 100 cycles at 300 mA g(-1)). This work suggests a strategy to improve the electrochemical performance of Li-ion batteries by using graphene as supporting sheets for loading of active materials and carbon as the covering layers.

Ab Initio Prediction of A Silicene and Graphene Heterostructure As an Anode Material for Li- and Na-Ion Batteries

Synergistic Double-Shell Coating of Graphene and Li4SiO4 on Silicon for High Performance Lithium-Ion Battery Application

Combination of silicene and boronene as a potential anode material for high-performance lithium-ion batteries: Insights from first principles

Silicon Nanoparticles Coated with Nanoporous Carbon As a Promising Anode Material for Lithium Ion Batteries

Ab Initio Prediction of Two-Dimensional Si3C Enabling High Specific Capacity As an Anode Material for Li/Na/K-ion Batteries

<i>Ab initio</i> prediction of two-dimensional Si<sub>3</sub>C enabling high specific capacity as an anode material for Li/Na/K-ion batteries

Lithiation and Sodiation of Hydrogenated Silicene: A Density Functional Theory Investigation

First-principles study on the synergistic mechanism of SnO 2 and 2 graphene as a lithium ion battery anode 3

Heterogeneous Interface-Derived Engineered Electronic Structure of SiO with Enhanced Lithium Storage

Novel Design of Uniform Si@graphite@C Composite As High-Performance Li-ion Battery Anodes

First-Principle Study of a ZnS/Graphene Heterostructure as a Promising Anode Material for Lithium-Ion Batteries

First-principles study on the synergistic mechanism of SnO2 and graphene as a lithium ion battery anode

Organic salts with unsaturated bond and diverse anions as substrates for solid electrolyte interphase on graphite anodes

An Ab Initio Study of Lithization of Two-Dimensional Silicon–Carbon Anode Material for Lithium-Ion Batteries

Theoretical studies of SiC van der Waals heterostructures as anodes of Li-ion batteries

2D Ca2N/silicene Donor-Acceptor Heterostructure with Interstitial Anionic Electrons As Anode Material for Lithium-Ion Batteries

Heterostructured SnS-ZnS@C Hollow Nanoboxes Embedded in Graphene for High Performance Lithium and Sodium Ion Batteries

Constructing Janus SnSSe and Graphene Heterostructures As Promising Anode Materials for Li‐ion Batteries

High-performance Self-Organized Si Nanocomposite Anode for Lithium-Ion Batteries

Ab Initio Study of the Electronic Properties of a Silicene Anode Subjected to Transmutation Doping

Graphene/Carbon-Coated Si Nanoparticle Hybrids As High-Performance Anode Materials for Li-Ion Batteries