<i>Ab initio</i> prediction of two-dimensional Si<sub>3</sub>C enabling high specific capacity as an anode material for Li/Na/K-ion batteries

Yanning Wang,Yinshi Li

DOI: https://doi.org/10.1039/c9ta11589g

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:A two-dimensional Si3C monolayer possessing excellent theoretical specific capacities and conductivities guarantees great potential for anode application in Li/Na/K-ion batteries.

What problem does this paper attempt to address?

Ab Initio Prediction of Two-Dimensional Si3C Enabling High Specific Capacity As an Anode Material for Li/Na/K-ion Batteries

Yanning Wang,Yinshi Li

DOI: https://doi.org/10.1039/c9ta11589g

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Anode materials that possess similar electronic structures but larger lattice parameters in comparison with graphene usually show higher theoretical specific capacities for Li/Na/K-ion batteries. Herein, density functional theory (DFT) calculations are applied to evaluate the working performances of a two-dimensional Si3C monolayer with larger bond lengths than graphene. The negative adsorption energies of Li/Na/K atoms on the surface of the Si3C monolayer avoid the appearance of dendrites. With the intercalation of Li/Na/K atoms, the Si3C monolayer exhibits a puckered structure instead of its initial planar structure, lowering the diffusion energy barrier of Li/Na/K atoms. The theoretical specific capacities for Li, Na and K-ion batteries are estimated to be as high as 1394, 1115 and 836 mA h g(-1), corresponding to the stoichiometries of Li5Si3C, Na4Si3C and K3Si3C, respectively. The average open circuit voltages (OCVs) for Li/Na/K-ion batteries are 0.58 V, 0.50 V and 0.71 V, respectively. The density of states (DOS) calculation reveals that the Si3C monolayer is semimetallic and its electronic conductivity can be enhanced by the intercalation of alkali metal atoms. In Li, Na and K-ion batteries, it is found that the maximum variations of lattice parameters of the Si3C monolayer are 3.54%, 2.69% and 2.24%, respectively. All the desirable properties indicate that the Si3C monolayer is a promising anode material for Li/Na/K-ion batteries. It also suggests that silicene doped with moderate carbon or some other elements is a potential anode material for alkali metal-based batteries.
Exploring a novel two-dimensional metallic Y4C3 sheet applied as an anode material for sodium-ion batteries

Yuzhu Cui,Haifei Qin,Panlong Kong,Jiao Chen,Xinyong Cai,Yuanzheng Chen

DOI: https://doi.org/10.1039/d2cp00111j

2022-04-13

Abstract:As novel "post lithium-ion batteries" and promising alternatives to lithium-ion batteries (LIBs) suffering from the limited Li resources, sodium-ion batteries (SIBs) are nowadays emerging and show bright prospects in large-scale energy storage applications due to abundant Na resources. However, a lack of suitable anode materials has become a key obstacle for the development of SIBs. Here we explore the potential of the two-dimensional (2D) Y-C space and identify a novel anode material for SIBs, a new Y4C3 sheet with P3̄m1 crystal symmetry, by means of first-principles swarm structure calculations. This Y4C3P3̄m1 structure has rather good kinetic and thermodynamic stability, possesses intrinsic metallicity, and remains metallic after adsorbing Na atoms, ensuring good electrical conductivity during the SIB cycle. Remarkably, a Y4C3 sheet as an anode for SIBs possesses the essential properties of a high specific capacity (∼752 mA h g-1), a low barrier energy (∼0.1 eV), and suitable open-circuit voltage (0-0.15 V). These characteristics are comparable and even superior to those of another known 2D Y2C anode material, indicating that the Y4C3 sheet can act as an appealing new candidate as an anode material for SIBs and offering new insights into the 2D Y-C space.
Theoretical prediction of two-dimensional CrSi2N4 as a potential anode material for Na-ion batteries

Boyang Du,Jianzhong Lou,Minghui Wu,Zhanfei Wu,Guangbei Liu,Hu Li,Shizhe Huo,Lei Liu,Linxia Wang

DOI: https://doi.org/10.1088/1361-6463/ad31e8

2024-03-10

Journal of Physics D Applied Physics

Abstract:Efficient anode materials are critical for high-performance rechargeable lithium-ion batteries and sodium-ion batteries. This paper systematically investigates the potential of the CrSi2N4 monolayer as anode material for lithium-ion batteries and sodium-ion batteries by first-principles density functional theory calculations. It was found that CrSi2N4 exhibits outstanding performance in sodium-ion batteries, with a low diffusion energy barrier of 0.10 eV and a high theoretical specific capacity of 490 mAh g-1. Meanwhile, the average open circuit voltage is 0.47 V, comparable to the typical anode materials. In addition, a small lattice constant change of 0.3% – 3.1% ensures the cycling stability of CrSi2N4 in sodium-ion batteries. This work suggests a promising candidate anode material for sodium-ion batteries.

physics, applied
Prediction of SiS2 and SiSe2 as the Promising Anode Materials for Sodium-ion Batteries

Xianpeng Wang,Lu Wang,Youyong Li

DOI: https://doi.org/10.1039/d2cp01184k

IF: 3.3

2022-05-06

Physical Chemistry Chemical Physics

Abstract:In this work, we suggest SiS2 and SiSe2 as anode materials for sodium-ion batteries based on the first-principles prediction. Both SiS2 and SiSe2 have suitable adsorption energies (-1.01/-1.24 eV) and large diffusion constants (1.24×10-4/6.72×10-5 cm2/s) for Na ions at 300 K, resulting in low diffusion barriers (less than 0.1 eV) at high Na adsorption concentrations. As the anode materials, SiS2 and SiSe2 exhibit excellent electrochemical stability with high theoretical capacities (517/864 mAh/g) and desirable average voltages (0.19/0.25 V). Given these exceptional properties, the SiS2 and SiSe2 are desired to achieve the promising electrode materials for sodium-ion batteries.

chemistry, physical,physics, atomic, molecular & chemical
B 3 S 2 monolayer as an anode material for Na/K-ion batteries: a first-principles study

Danhong Wang,Zhifang Yang,Wenliang Li,Jingping Zhang

DOI: https://doi.org/10.1039/d3cp01372c

IF: 3.3

2023-08-25

Physical Chemistry Chemical Physics

Abstract:Two-dimensional (2D) materials used as anodes in metal-ion battery have attracted increased attention due to their high specific surface area, abundant active sites and good electronic properties. Searching for 2D materials with high storage capacity and low diffusion energy barrier is one of the most effective ways to design noval anode material. In this work, based on first-principles calculations, we design a new 2D B 3 S 2 monolayer with high thermodynamic and dynamic stability. The obtained B 3 S 2 monolayer has high cohesive energy, ensuring the feasibility of experimental synthesis. These characteristics of B 3 S 2 monolayer prompt us to explore its application as anode materials. B 3 S 2 monolayer exhibits not only metallic nature but also low diffusion energy barrier (0.037 eV) and open-circuit voltage (0.09 V). More importantly, B 3 S 2 monolayer shows a very high theoretical capacity of 1658 mA·h·g -1 as anode materials for sodium-ion batteries, which is comparable to other similar or common 2D materials. All these intriguing properties make B 3 S 2 monolayer a promising 2D anode material for sodium ion batteries.

chemistry, physical,physics, atomic, molecular & chemical
Ab Initio Prediction of A Silicene and Graphene Heterostructure As an Anode Material for Li- and Na-Ion Batteries

L. Shi,T. S. Zhao,A. Xu,J. B. Xu

DOI: https://doi.org/10.1039/c6ta06976b

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:The heterostructure of silicene and graphene can serve as a promising anode material for lithium- and sodium-ion batteries.
SiN 3 monolayer: A potential anode material with high storage capacity and hasty diffusion for Li- and Na-ion batteries

Mehwish K. Butt,Javed Rehman,Zhao Yang,Adel El-marghany,ZhiPeng Li,Mohamed F. Shibl

DOI: https://doi.org/10.1016/j.est.2024.112290

IF: 9.4

2024-06-07

Journal of Energy Storage

Abstract:Considerable interest is directed toward next-generation electrochemical energy storage systems due to their massive applications in powered electronic devices. Silicon is an anode material for metal-ion batteries due to its high storage capacity. However, poor electronic conductivity and volume alteration during the intercalation and deintercalation process impede its performance as an anode. To overwhelm these issues, herein, two-dimensional (2D) lightweight SiN 3 is proposed to combine the properties of silicon and nitrogen. Density functional theory (DFT) examines the mechanism of SiN 3 monolayer as an anode with exceptional efficacy for (Li + , Na + )-based batteries. SiN 3 monolayer is found to be thermally, mechanically, and dynamically stable. The maximum theoretical capacity of 1146 mA h g −1 for (Li + , Na + )-based batteries is obtained. The calculated values of the diffusion barrier are as small as 0.025 eV for Li and 0.034 eV for Na, which help in the rapid diffusion of Li + and Na + on the SiN 3 monolayer. Also, the obtained average open circuit voltages of 0.43 V for Li 3 SiN 3 and 0.47 V for Na 3 SiN 3 meet the commercial design. These findings indicate that the newly reported SiN 3 monolayer is an attractive anode material for (Li + , Na + )-based batteries. These outcomes provide a way for experimentalists to explore SiN 3 -based anode materials for battery applications.

energy & fuels
Two-dimensional Si2C material exhibits efficient conductive properties and outstanding capacitance characteristics in Li/Na/K-ion batteries

Qirui He,Yanqing Shen,Min Zhou,Xianghui Meng,Xiangqian Jiang,long Pang,Peng E,Zhongxiang Zhou

DOI: https://doi.org/10.1088/1361-6463/ad3f2a

2024-04-17

Journal of Physics D Applied Physics

Abstract:To improve the performance of energy storage devices, research into anode materials is essential. This study explores the potential of two-dimensional (2D) materials, particularly silicon carbide (Si2C), to enhance the efficacy of lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), and potassium-ion batteries (KIBs). Our first-principles calculations indicate that Si2C achieves storage capacities of 174.7mAh g−1 for LIBs, 436.8 mAh g−1 for SIBs, and 349.4 mAh g−1 for KIBs. The exceptional performance of Si2C comes from its high conductivity, large surface area, high capacitance, synergistic atomic radius and electronegativity effects. Furthermore, this study delves into the diffusion kinetics of Li/Na/K-ions in Si2C, revealing extremely low energy barriers and uncovering the fundamental principles behind its superior electrochemical performance. This research emphasizes Si2C's potential in energy storage, highlighting its capacity and diffusion advantages for Li/Na/K-ion batteries.

physics, applied
Metallic Two-Dimensional Cu2Si Monolayer As Promising Anode Materials for Lithium and Sodium Ion Batteries, a First Principles Study

Xiaoli Sun,Shiyun Wu,Khang Ngoc Dinh,Zhiguo Wang

DOI: https://doi.org/10.1016/j.jssc.2019.03.041

IF: 3.3

2019-01-01

Journal of Solid State Chemistry

Abstract:Two-dimensional (2D) materials have attracted much attention as anode materials for lithium ion batteries. However, most of the 2D materials are semiconductors with limited electron transportation. In this paper, the electronic properties of Cu2Si monolayer and adsorption and diffusion of Li/Na on Cu2Si monolayer were investigated by the density functional theory. The Cu2Si monolayer shows metallic characteristics. The adsorption energies are around -2.5 eV, which is stronger than those of Li/Na absorbed on other 2D materials. In addition, the diffusion energy barriers are 0.15 and 0.11 eV for Li and Na diffuses on Cu2Si monolayer, respectively, indicating that Cu2Si monolayer can be fast charged/discharged. These results indicate that Cu2Si monolayer can be a promising anode material for lithium and sodium ion batteries.
A First Principle Study of 2D Single-layer SiP as Anode Material for Lithium-ion Battery and Sodium-ion Battery

Yingying Xing,Chihao Cao,Zhong Huang,Liang Huang,Haijun Zhang,Quanli Jia

DOI: https://doi.org/10.1039/d3cp05164a

IF: 3.3

2024-01-25

Physical Chemistry Chemical Physics

Abstract:The promotion of lithium-ion batteries and sodium-ion batteries is limited by the deficiency of suitable anode material with desired electrochemical properties. In this work, the models of 2D single-layer SiP are constructed to explore its potential as anode materials for LIBs and SIBs by density functional theory (DFT). The diffusion of Li in bulk SiP is anisotropic. There is a low diffusion energy barrier of 0.28 eV along the X-axis. The low surface exfoliation energy suggests there is a high probability to prepare 2D single-layer SiP experimentally. Its structure stability is verified by ab initio molecular dynamics (AIMD) at 300 K and 400 K. The intercalation and diffusion behaviors of Li/Na on 2D single-layer SiP indicate that Li/Na tends to diffuse along the X-axis direction of 2D single-layer SiP. The diffusion energy barrier of Li/Na on 2D single-layer SiP is lower compared to bulk SiP. The conductivity of 2D single-layer SiP is improved after lithiation due to the upshift of Fermi levels. 2D single-layer SiP has lower average open circuit voltage as LIBs (1.66 V for LIBs and 1.11 V for SIBs) and high theoretical capacity (520 mAh·g -1 ). Hence, the 2D single-layer SiP can be an ideal anode material for LIBs and SIBs.

chemistry, physical,physics, atomic, molecular & chemical
Investigation on novel two-dimensional BC 2 P monolayer: A promising anode with high theoretical capacity for Na-/Li-ion batteries

Guoqing Zeng,Jiahe Lin,Renquan Li,Xiaowei Chen

DOI: https://doi.org/10.1016/j.jpowsour.2024.235638

IF: 9.2

2024-10-22

Journal of Power Sources

Abstract:In the quest for sustainable energy solutions, identifying novel, cost-effective, and stable anode materials for metal-ion batteries has emerged as a critical research area. This study introduces a two-dimensional BC 2 P monolayer, explored through first-principles calculations, as a promising candidate for Li and Na anode material. We have confirmed the structural and thermodynamic stability of BC 2 P monolayer via phonon spectroscopy and molecular dynamics simulations. Additionally, the electronic structure analysis unveils the semimetallic nature of the BC 2 P monolayer. Notably, BC 2 P demonstrates an exceptional theoretical specific capacity for Li- and Na-ions, reaching up to 2240.89 mAhg −1 . This ultra-high capacity is complemented by relatively low diffusion barriers (416 meV for Li and 382 meV for Na) and favorable open-circuit voltages (ranging from 0.32 V to 1.28 V for Li and 0.25 V–1.23 V for Na). The characteristics of the proposed BC 2 P indicate its potential for achieving high-capacity energy storage and facilitating rapid ionic diffusion in Li- and Na-ion batteries.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Theoretical prediction of two-dimensional metallic AM 2 B 8 (AM = K, Rb, Cs) as anode materials for Na-ion batteries

Siqi Liu,Jinyan Chen,Yuhan Wang,Jianhua Hou,Qian Duan

DOI: https://doi.org/10.1016/j.mtcomm.2024.110284

IF: 3.8

2024-09-04

Materials Today Communications

Abstract:The development of two-dimensional anode materials with superior performance is becoming a critical undertaking for the advancement of Na-ion battery technology. Using isoelectronic substitution strategies, we predicted three alkali metal borides AM 2 B 8 (AM = K, Rb, Cs) based on the SrB 8 monolayer. Ab initio molecular dynamics simulations and phonon dispersion relationship calculations demonstrated their stability. Using density functional theory, we predict the feasibility of these three new metal nanosheets as anodes for Na-ion batteries. The AM 2 B 8 monolayer retains its metallicity after the insertion of Na ions, ensuring that the anode has good electrical conductivity. In addition, AM 2 B 8 has a low diffusion barrier and open circuit voltage (K 2 B 8 is 0.08 eV and 0.26 V) during charge/discharge. In the voltage range that inhibits dendrite growth, K 2 B 8 can reach the maximum theoretical specific capacity (326 mAh/g). These results indicate that AM 2 B 8 , especially K 2 B 8 , is a promising anode material for Na-ion batteries.

materials science, multidisciplinary
Two-dimensional AlB4/Al2B2: High-Performance Dirac Anode Materials for Sodium-Ion Batteries

Ru-Feng Zou,Xiao-Juan Ye,Xiao-Hong Zheng,Ran Jia,Chun-Sheng Liu

DOI: https://doi.org/10.1039/d3cp03649a

IF: 3.3

2023-01-01

Physical Chemistry Chemical Physics

Abstract:Sodium-ion batteries (SIBs) have attracted much attention due to their abundant earth-reserves and low cost. Two-dimensional (2D) Dirac materials show great application prospects as anodes for SIBs because of their excellent electronic conductivity. We explore the performances of AlB4 (Al2B2) monolayers and bilayers as anodes for SIBs by using first-principles calculations. The AlB4 (Al2B2) monolayer exhibits a high theoretical storage capacity of 954.15 (709.17) mA h g-1 and a low diffusion barrier of 0.36 (0.03) eV. The calculated average open-circuit voltage (0.68/0.18 V) falls within the acceptance range of 0.1-1.0 V for anode materials. The fully sodiated AlB4 (Al2B2) monolayer shows a tiny lattice expansion of 0.9% (2.4%), suggesting good reversibility. Furthermore, in comparison with the AlB4 (Al2B2) monolayer, the AlB4 (Al2B2) bilayer can provide stronger binding with Na on the outside surface. These results contribute to a better understanding of the AlB4 (Al2B2) monolayers and bilayers as potential high-performance anode materials for SIBs.
BiSbSi: A New Ternary Layered Si-based Anode for Li-ion Batteries with High Performance

Yafei Zhao,Xiao Liu,Haiyan Zhang,Meilin Liu,Wenwu Li

DOI: https://doi.org/10.1016/j.elecom.2022.107343

IF: 5.443

2022-01-01

Electrochemistry Communications

Abstract:Silicon has become the most promising anode material for industrial application to replace the currently utilized graphite because of its large capacity and abundant reserves. However, its poor electronic conductivity and slow Li-ionic diffusion capability along with severe volume expansion impede its high-rate performace. To resolve these issues, we develop a ternary BiSbSi compound with a layered lattice, which presents significantly improved reaction kinetics of 300 mA h g−1 at 20 A g−1 enabled by faster electronic conduction and lithium ion diffusion and simultaneously reduce the volume variation, thus leading to longer cycling stability of remaining 561 mA h g−1 after 1000 cycles at 2 A g−1, compared with Si counterparts. Broadly the ternary layered Si-based anodes hold great promises to be applied in the near future.
Novel two-dimensional SiC2 monolayer with potential as a superior anode for sodium-ion batteries

Chaolan Li,Xiao Wang,Xingrui Zheng,Zhentao Yuan,Yuan Wang

DOI: https://doi.org/10.1007/s10853-022-07766-9

IF: 4.5

2022-10-08

Journal of Materials Science

Abstract:Based on first-principles calculations, we report a new type of two-dimensional SiC 2 (kust- α ) composed of hexagons and decagonal rings. Kust- α had a stable two-dimensional structure with anisotropic mechanical properties and a small volume expansion of 8.12%. The feasibility of using the kust- α monolayer as a anode material for sodium-ion batteries (SIBs) was evaluated. The results show that kust- α exhibits a high theoretical capacity for SIBs, and reaches 1203 mAh·g −1 on two sides, which is much larger than traditional graphite materials. Kust- α has an open circuit voltage that is much lower than other materials and a relatively low diffusion energy barrier, which shows its good potential as an anode material for SIBs. In addition, a possible facile synthesis route for the kust- α approach was proposed. These interesting findings provide a new negative electrode material for SIBs, and a new strategy was proposed to reduce the expansion of silicon-based electrode materials.

materials science, multidisciplinary
LC567:A new 2D semimetallic carbon allotrope as a promising anode material for lithium-ion batteries

Yusheng Cai,Yi Wei,Cuihong Lv,Lichuan Zhang,Yuanping Chen

DOI: https://doi.org/10.1039/d3cp01640d

IF: 3.3

2023-07-09

Physical Chemistry Chemical Physics

Abstract:A novel two-dimensional carbon allotrope has been proposed using density functional theory (DFT) calculations. The cell contains 24 carbon atoms and is composed of five-, six-, and seven-membered rings, named LC567. It is low in energy and has excellent dynamic, thermal, and mechanical stability. Our results demonstrate that the theoretical capacity of monolayer LC567 is up to 1117 mAhg-1, and the lithium diffusion barrier is also very low, around 0.18 eV, which is superior to graphene and most reported two-dimensional anode materials. In addition, LC567 exhibits quite low open circuit voltage during the process of Li ions insertion. For the bulk of LC567, it still exhibits high capacity and ideal open circuit voltage, revealing its potential application as an anode for lithium batteries. Meanwhile, we discuss the mechanism of the high capacity and low diffusion barrier of LC567 as an anode material for lithium battery and find that high capacity and low diffusion barrier properties may be related to the pentagonal carbon rings (C5).

chemistry, physical,physics, atomic, molecular & chemical
Sc2c As A Promising Anode Material with High Mobility and Capacity: A First-Principles Study

Xingshuai Lv,Wei,Qilong Sun,Lin Yu,Baibiao Huang,Ying Dai

DOI: https://doi.org/10.1002/cphc.201700181

IF: 3.52

2017-01-01

ChemPhysChem

Abstract:Two-dimensional (2D) Sc2C, an example of a MXene, has been attracting extensive attention due to its distinctive properties and great potential in applications such as energy storage. In light of its high capacity and fast charging-discharging performance, Sc2C exhibits significant potential as an anode material for lithium- and sodium-ion batteries. Herein, a systematic investigation of Li/Na atom adsorption and diffusion on Sc2C planes was performed based on density functional calculations. The metallic character of pristine and adsorbed Sc2C ensures desirable electric conductivity, which indicates the advantages of 2D Sc2C for lithium- and sodium-ion batteries. A significant charge transfer from the Li/Na atoms to Sc2C is predicted, which indicates the cationic state of the adatoms. In addition, the diffusion barriers are as low as 0.018 and 0.012 eV for Li and Na, respectively, which illustrates the high mobility and cycling ability of Sc2C. In particular, each formula unit of Sc2C can adsorb up to two Li/Na atoms, which corresponds to a relatively high theoretical capacity of 462 or 362 mAhg(-1). The average electrode potential was calculated to be as low as 0.32 and 0.24 V for stoichiometric Li2Sc2C and Na2Sc2C, respectively, which makes Sc2C attractive for the overall voltage of the cell. Herein, our results suggest that Sc2C could be a promising anode candidate for both lithium-ion and sodium-ion batteries.
Theoretical Predication of a Two-Dimensional Structure of Non-Layered ScC As an Excellent Electrode Material for Rechargeable Na-ion Battery

Yungang Zhou,Jing Li

DOI: https://doi.org/10.1016/j.apsusc.2018.08.138

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:Non-layered two-dimensional structures with the atomic thickness recently attract much attention. In this work, we predicated a two-dimensional structure of non-layered ScC, denoted as ScC sheet, and evaluated its potential as the electrode material of Na-ion battery. The stability of ScC sheet is determined by the cohesive energy, phonon spectrum and potential energy curve calculations. Interestingly, the proposed ScC sheet can exhibit many unexpected electrochemical properties. It is found that ScC sheet can possess strong Na adsorption capability. Both pristine and Na-interacted ScC sheets represent good electronic conductivity due to the metallic nature. The structural degradation of the ScC during the sodiation and desodiation processes will not be anticipated. Besides, our results reveal that the ScC sheet has a minimal diffusion barrier of 9 meV and the calculated theoretical capacity of ScC sheet can reach to 940 mAh.g(-1) on the basic of the second layer adsorption. Thus, benefiting from these features, ScC sheet is expectable to be served as a promising electrode material for the Na-ion battery.
Two-Dimensional AlB 4 and Al 2 B 2 : High-Performance Dirac Anode Materials for Sodium-Ion Batteries

Ru-Feng Zou,Xiao-Juan Ye,Xiao-Hong Zheng,Ran Jia,Chun-Sheng Liu,Chun-sheng Liu

DOI: https://doi.org/10.1039/d3cp03649a

IF: 3.3

2023-10-06

Physical Chemistry Chemical Physics

Abstract:Sodium-ion batteries (SIBs) have attracted much attention due to their abundant earth-reserves and low cost. Two-dimensional (2D) Dirac materials show great application prospects as anodes for SIBs because of their excellent electronic conductivity. We explore the performances of monolayer and bilayer AlB 4 (Al2B 2 ) as anodes for SIBs by using first-principles calculations. The AlB 4 (Al 2 B 2 ) monolayer exhibits a high theoretical storage capacity of 954.15 (709.17) mA h g −1 and a low diffusion barrier of 0.36 (0.03) eV. The calculated average open-circuit voltage (0.68/0.18 V) falls within the acceptance range of 0.1−1.0 V for anode materials. The fully sodiated AlB 4 (Al 2 B 2 ) monolayer shows tiny lattice expansion of 0.9% (2.4%), suggesting the good reversibility. Furthermore, in comparison with monolayer AlB 4 (Al 2 B 2 ), the AlB 4 (Al 2 B 2 ) bilayer can provide stronger binding with Na on the outside surface. These results contribute to a better understanding of monolayer and bilayer AlB 4 (Al 2 B 2 ) as potential high-performance anode materials for SIBs.

chemistry, physical,physics, atomic, molecular & chemical
Two-dimensional Zr2C Monolayer As Anode Material for Li, Na and K Ion Batteries

Yusheng Wang,Sen Wang,Yongqi Zhang,Nahong Song,Shijun Luo,Bin Xu,Fei Wang

DOI: https://doi.org/10.1016/j.chemphys.2024.112521

IF: 2.552

2025-01-01

Chemical Physics

Abstract:In this paper, the electronic properties and storage capacity of Zr2C after adsorption of Li, Na, and K metal ions are systematically investigated with density-functional theory (DFT) based on first-principles calculations. For Li, Na, and K ion adsorption, the negative adsorption energy indicates a strong interaction between the metal ions and the two-dimensional (2D) Zr2C monolayer, which prevents the formation of dendrites, and the adsorbed system has good metallic properties with low diffusion barriers, suitable open-circuit voltages, and high theoretical storage capacities. Our study shows that Zr2C monolayer is a promising anode material for metal-ion batteries.

<i>Ab initio</i> prediction of two-dimensional Si<sub>3</sub>C enabling high specific capacity as an anode material for Li/Na/K-ion batteries

Ab Initio Prediction of Two-Dimensional Si3C Enabling High Specific Capacity As an Anode Material for Li/Na/K-ion Batteries

Exploring a novel two-dimensional metallic Y4C3 sheet applied as an anode material for sodium-ion batteries

Theoretical prediction of two-dimensional CrSi2N4 as a potential anode material for Na-ion batteries

Prediction of SiS2 and SiSe2 as the Promising Anode Materials for Sodium-ion Batteries

B 3 S 2 monolayer as an anode material for Na/K-ion batteries: a first-principles study

Ab Initio Prediction of A Silicene and Graphene Heterostructure As an Anode Material for Li- and Na-Ion Batteries

SiN 3 monolayer: A potential anode material with high storage capacity and hasty diffusion for Li- and Na-ion batteries

Two-dimensional Si2C material exhibits efficient conductive properties and outstanding capacitance characteristics in Li/Na/K-ion batteries

Metallic Two-Dimensional Cu2Si Monolayer As Promising Anode Materials for Lithium and Sodium Ion Batteries, a First Principles Study

A First Principle Study of 2D Single-layer SiP as Anode Material for Lithium-ion Battery and Sodium-ion Battery

Investigation on novel two-dimensional BC 2 P monolayer: A promising anode with high theoretical capacity for Na-/Li-ion batteries

Theoretical prediction of two-dimensional metallic AM 2 B 8 (AM = K, Rb, Cs) as anode materials for Na-ion batteries

Two-dimensional AlB4/Al2B2: High-Performance Dirac Anode Materials for Sodium-Ion Batteries

BiSbSi: A New Ternary Layered Si-based Anode for Li-ion Batteries with High Performance

Novel two-dimensional SiC2 monolayer with potential as a superior anode for sodium-ion batteries

LC567:A new 2D semimetallic carbon allotrope as a promising anode material for lithium-ion batteries

Sc2c As A Promising Anode Material with High Mobility and Capacity: A First-Principles Study

Theoretical Predication of a Two-Dimensional Structure of Non-Layered ScC As an Excellent Electrode Material for Rechargeable Na-ion Battery

Two-Dimensional AlB 4 and Al 2 B 2 : High-Performance Dirac Anode Materials for Sodium-Ion Batteries

Two-dimensional Zr2C Monolayer As Anode Material for Li, Na and K Ion Batteries