Silicon Nanoparticles Coated with Nanoporous Carbon As a Promising Anode Material for Lithium Ion Batteries

Hang Xu,Mingtao Ding,Dongni Li,Yu Liu,Yinshan Jiang,Fangfei Li,Bing Xue

DOI: https://doi.org/10.1039/d0nj03918g

IF: 3.3

2020-01-01

New Journal of Chemistry

Abstract:As a promising anode candidate, silicon (Si) nanoparticles have been widely studied for use in lithium ion batteries.

What problem does this paper attempt to address?

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

Z. Yan,J. Jiang,Y. Zhang,D. Yang,N. Du

DOI: https://doi.org/10.1016/j.mtnano.2022.100175

IF: 10.3

2022-01-01

Materials Today Nano

Abstract:We design porous silicon (Si) nanoparticles with both nanosize and porous structures via a simple alkaline etching method. The etching at grain boundaries and the anisotropic etching of the different crystal planes of the polycrystalline silicon are responsible for the homogeneous porous nanostructures. After the porous Si nanoparticles are coated with carbon layer, the composite delivering a discharge capacity of 1645.6 mAh g(-1) at 0.4 A g(-1) after 200 cycles, an outstanding discharge capacity of 861.5 mA g(-1) at 4 A g(-1) after 800 cycles with a high capacity retention of more than 65%, and a rate capacity of 904.7 mA g(-1) at 12.8 A g(-1). The porous nanoparticles show both the nanosize (similar to 100 nm) and the porous structure, which can furthest accommodate the large volume changes of the Si anode, resulting in the good electrochemical performance. The design of porous Si nanoparticles with a high yield of 93% may give a scalable, low-cost, and green approach for commercial silicon-based anodes of lithium-ion batteries. (C) 2022 Published by Elsevier Ltd.
Silicon-Based Materials As High Capacity Anodes for Next Generation Lithium Ion Batteries

Bo Liang,Yanping Liu,Yunhua Xu

DOI: https://doi.org/10.1016/j.jpowsour.2014.05.096

IF: 9.2

2014-01-01

Journal of Power Sources

Abstract:Silicon (Si)-based materials have the highest capacity among the investigated anode materials and have been recognized as one of the most promising materials for lithium-ion batteries. However, it is still a significant challenge to obtain good performance for practical applications due to the huge volume change during the electrochemical process. To date, the most successful strategy is to introduce other components into Si to form composite or alloy materials. In this review, the recent progress in Si-based materials utilized in lithium-ion batteries is reviewed in terms of composite systems, nano-structure designs, material synthesis methods, and electrochemical performances. The merits and disadvantages of different Si-based materials, the understanding of the mechanisms behind the performance enhancement as well as the challenges faced in Si anodes are also discussed. We are trying to present a full scope of the Si-based materials, and help understand and design future structures of Si anodes in lithium-ion batteries.
Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Mingyuan Ge,Jiepeng Rong,Xin Fang,Anyi Zhang,Yunhao Lu,Chongwu Zhou

DOI: https://doi.org/10.1007/s12274-013-0293-y

2013-01-01

Abstract:Nanostructured silicon has generated significant excitement for use as the anode material for lithium-ion batteries; however, more effort is needed to produce nanostructured silicon in a scalable fashion and with good performance. Here, we present a direct preparation of porous silicon nanoparticles as a new kind of nanostructured silicon using a novel two-step approach combining controlled boron doping and facile electroless etching. The porous silicon nanoparticles have been successfully used as high performance lithium-ion battery anodes, with capacities around 1,400 mA·h/g achieved at a current rate of 1 A/g, and 1,000 mA·h/g achieved at 2 A/g, and stable operation when combined with reduced graphene oxide and tested over up to 200 cycles. We attribute the overall good performance to the combination of porous silicon that can accommodate large volume change during cycling and provide large surface area accessible to electrolyte, and reduced graphene oxide that can serve as an elastic and electrically conductive matrix for the porous silicon nanoparticles.
Carbon Dot-Modified Silicon Nanoparticles for Lithium-Ion Batteries

Du Qiao-kun,Wu Qing-xia,Wang Hong-xun,Meng Xiang-juan,Ji Ze-kai,Zhao Shu,Zhu Wei-wei,Liu Chuang,Ling Min,Liang Cheng-du

DOI: https://doi.org/10.1007/s12613-020-2247-1

2021-01-01

International Journal of Minerals Metallurgy and Materials

Abstract:Silicon (Si) particles were functionalized using carbon dots (CDs) to enhance the interaction between the Si particles and the binders. First, CDs rich in polar groups were synthesized using a simple hydrothermal method. Then, CDs were loaded on the Si surface by impregnation to obtain the functionalized Si particles (Si/CDs). The phases and microstructures of the Si/CDs were observed using Fourier-transform infrared reflection, X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. Si/CDs were used as the active material of the anode for electrochemical performance experiments. The electrochemical performance of the Si/CD electrode was assessed using cyclic voltammetry, electrochemical impedance spectroscopy, and constant current charge and discharge experiment. The electrodes prepared with Si/CDs showed good mechanical structure stability and electrochemical performance. After 150 cycles at 0.2 C, the capacity retention rate of the Si/CD electrode was 64.0%, which is twice as much as that of pure Si electrode under the same test conditions.
Cu 3 Si-Modified Silicon Nanoparticles Encapsulated within SiO x and Hollow Carbon for Lithium-Ion Battery Anodes

Xinhong Chen,Xueru Zhang,Jiewu Cui,Yong Zhang,Elena A. Baranova,Yan Wang,Xia Shu,Yongqiang Qin,Jiaqin Liu,Yucheng Wu

DOI: https://doi.org/10.1021/acsanm.2c02167

IF: 6.14

2022-09-16

ACS Applied Nano Materials

Abstract:Silicon (Si), a promising anode material for lithium-ion batteries, usually suffers from low capacity retention and poor rate performance due to its huge volume change issue and low electronic conductivity. The synergistic effect brought by the composite of carbon, metal silicide, and silicon is proven to be an effective measure to enhance the performance of silicon-based anodes. Herein, Cu3Si-modified silicon nanoparticles (SiNPs) encapsulated within SiO x and hollow carbon shell (M-Si@H-C) are designed and constructed by an electroless deposition and pyrolysis process, which delivers high specific capacity (1150 mAh g–1 at 0.21 A g–1 and 450 mAh g–1 at 8.4 A g–1) and long cycling stability (86.3% capacity retention after 200 cycles at 1 A g–1). The nanostructure and formation mechanism of the M-Si@H-C is elucidated by employing X-ray diffraction and transmission electron microscopy techniques. The enhancement to the lithium storage performance of the nanostructure is clarified on the basis of the microstructure investigation and electrochemical determination.

materials science, multidisciplinary,nanoscience & nanotechnology
Effect of Surface Modification on Electrochemical Performance of Nano-Sized Si As an Anode Material for Li-ion Batteries

Chao Li,Tongfei Shi,Decheng Li,Hideyuki Yoshitake,Hongyu Wang

DOI: https://doi.org/10.1039/c5ra28021d

IF: 4.036

2016-01-01

RSC Advances

Abstract:Silicon is one of the most promising anode materials for lithium-ion batteries.
High-performance Self-Organized Si Nanocomposite Anode for Lithium-Ion Batteries

Xiuyun Zhao,Dingguo Xia,Lin Gu,Juncheng Yue,Biao Li,Hang Wei,Huijun Yan,Ruqiang Zou,Yingxia Wang,Xiayan Wang,Ze Zhang,Jixue Li

DOI: https://doi.org/10.1016/s2095-4956(14)60150-9

2014-01-01

Abstract:Silicon is being investigated extensively as an anodic material for next-generation lithium ion batteries for portable energy storage and electric vehicles. However, the large changes in volume during cycling lead to the breakdown of the conductive network in Si anodes and the formation of an unstable solid-electrolyte interface, resulting in capacity fading. Here, we demonstrate nanoparticles with a Si@Mn22.6Si5.4C4@C double-shell structure and the formation of self-organized Si-Mn-C nanocomposite anodes during the lithiation/delithiation process. The anode consists of amorphous Si particles less than 10 nm in diameter and separated by an interconnected conductive/buffer network, which exhibits excellent charge transfer kinetics and charge/discharge performances. A stable specific capacity of 1100 mAhg(-1) at 100 m.A.g(-1) and a coulombic efficiency of 99.2% after 30 cycles are achieved. Additionally, a rate capacity of 343 mAh.g(-1) and a coulombic efficiency of 99.4% at 12000 mA.g(-1) are also attainable. Owing to its simplicity and applicability, this strategy for improving electrode performance paves a way for the development of high-performance Si-based anodic materials for lithium ion batteries.
Silicon/Carbon Nanoparticles Assembled with Multifunction Carbon Nanotubes/Sheets as High-Performance Anode of Lithium-Ion Batteries

Ruifeng Yang,Canbing Li,Xinxi Li,Guoqing Zhang,Yanlin Liu,Jian Deng

DOI: https://doi.org/10.3390/batteries9090460

2023-09-11

Batteries

Abstract:Silicon as an electrode material in the lithium-ion battery application scenario has been hindered by its significant volumetric expansion and intricate synthesis processes. In this research, we have successfully synthesized Si@C/carbon nanotubes/carbon sheets (Si@C-CNTs/CS) composites by employing a simple one-pot method along with modified magnesium thermal reaction, which involves melamine to prevent high temperature. The resulting multifunctional Si@C-CNTs/CS composites demonstrate enhanced stability during volume change in silicon, resulting in both higher capacity compared to conventional carbon coating layer and improved conductivity of the materials. The results indicate that the Si@C-CNTs/CS composites exhibit a high discharge-specific capacity of up to 2981.64 mAh g−1 at 0.5 A g−1 current density and retain a discharge-specific capacity of 1487.71 mAh g−1 even after 300 cycles. Therefore, the double-layer carbon network structure of carbon nanotubes/carbon nanosheets can provide an efficient and simple preparation method for high-performance Si-base anode materials in practical applications.
Silicon nanowires for Li-based battery anodes: a review

Mihai Robert Zamfir,Hung Tran Nguyen,Eric Moyen,Young Hee Lee,Didier Pribat

DOI: https://doi.org/10.1039/c3ta11714f

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:After more than 20 years of steady progress, lithium-ion batteries still exhibit modest energy capacities that seem to have reached their asymptotic values with the present combination of graphite at the anode and insertion oxide or phosphate materials at the cathode. New applications, particularly for all-electric vehicles are pushing the development of electrode materials with higher Li storage capabilities, for both electrodes. Silicon, which exhibits the highest known Li-alloying capacity is one of the most promising anode materials. However, Li alloying with Si is accompanied by a large volume change which induces cracking and rapid pulverization of Si-based anodes. Significant improvements in the anode's lifetime as well as charge–discharge rates have been obtained over the past few years by employing Si nanostructures, particularly nanowires. In this paper, we present the main synthesis methods for Si nanowires as well as the alloying properties of Li with Si and review how the use of Si-based nanowires has evolved, thanks to sophisticated material/structure combinations, including core–shell nanowires, composites as well as hollowed nanotube-like approaches.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Silicon Nanoparticles Within the Carbonized SU-8 Cages As A Micro Lithium-Ion Battery Anode

Xuanlin Kuang,Xiaozhao Li,Siwei Li,Jiangfeng Xiang,Xiaohong Wang

DOI: https://doi.org/10.1109/jmems.2017.2783357

IF: 2.829

2018-01-01

Journal of Microelectromechanical Systems

Abstract:Silicon as the anode materials for lithium batteries has over tenfold higher specific capacity than that of the commercial graphite. However, it suffers from poor recyclability and large volume expansion (similar to 400%) during the lithiation and delithiation processes. Here, we develop an effective approach to fabricate a novel silicon/void/carbon (Si/void/C) anode used in micro lithium-ion batteries. The silicon nanoparticles (SiNPs) in the anode materials enable the high capacity, while the carbonized SU-8 provides a structural support and also facilitates the fast lithium-ions transport between the electrolyte and the silicon. The nano-void space between SiNPs and carbon scaffold provides enough space for the expansion of SiNPs during intercalation and de-intercalation of lithium-ions into the anode; moreover, it is also very helpful to reduce the damage of the carbon structure and offer high cycle life. To balance the specific capacity and the stability, the Si/void/C nanocomposite with the weight ratio of 60/0/40 shows the highest specific capacity retention of 1200 mAh/g after 80 cycles with 2200 mAh/g as the initial specific capacity. In the future, the micro lithium-ion batteries can be directly prototyped on chip by the lithography techniques.
Carbon-Coated Sio(2) Nanoparticles As Anode Material for Lithium Ion Batteries

Yu Yao,Jingjing Zhang,Leigang Xue,Tao Huang,Aishui Yu

DOI: https://doi.org/10.1016/j.jpowsour.2011.08.009

IF: 9.2

2011-01-01

Journal of Power Sources

Abstract:A simple approach is proposed to prepare C-SiO2 composites as anode materials for lithium ion batteries. In this novel approach, nano-sized silica is soaked in sucrose solution and then heat treated at 900°C under nitrogen atmosphere. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) analysis shows that SiO2 is embedded in amorphous carbon matrix. The electrochemical test results indicate that the electrochemical performance of the C-SiO2 composites relates to the SiO2 content of the composite. The C-SiO2 composite with 50.1% SiO2 shows the best reversible lithium storage performance. It delivers an initial discharge capacity of 536mAhg−1 and good cyclability with the capacity of above 500mAhg−1 at 50th cycle. Electrochemical impedance spectra (EIS) indicates that the carbon layer coated on SiO2 particles can diminish interfacial impedance, which leads to its good electrochemical performance.
Latest development of nanostructured Si/C materials for lithium anode studies and applications

Miao Zhang,Tengfei Zhang,Yanfeng Ma,Yongsheng Chen

DOI: https://doi.org/10.1016/j.ensm.2016.02.001

IF: 20.4

2016-07-01

Energy Storage Materials

Abstract:Silicon anodes for lithium-ion batteries have been extensively explored due to their high capacity, moderate operation potential, environmental friendliness, and high abundance. However, silicon’s application as anodes is hindered by its poor capacity retention caused by the large volume change during lithium insertion and desertion process, its intrinsic low conductivity and the formation of unstable solid-electrolyte interphase (SEI) films. Recently, influential improvements have been achieved using different design methods with the purpose of increasing cycle life and increasing charging rate performance. Here, we review such design methods including the rational design of nanostructured silicon, the combination of silicon with different carbonaceous materials including traditional carbons and the utilization of nanocarbons (such as carbon nanotube, graphene and corresponding three dimensional architectures). Meanwhile, we draw the essential reason accounting for the excellent electrochemical performance of those structures. Furthermore, we selectively depict the effects of binder, conductive additives and electrolyte composition, which also play important roles in silicon based battery performance.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Exploring silicon nanoparticles and nanographite-based anodes for lithium-ion batteries

Sohan Thombare,Rohan Patil,Ranjit Humane,Bharat Kale,Ramchandra Kalubarme,Dhanaji Malavekar,Manisha Phadatare,Chandrakant Lokhande

DOI: https://doi.org/10.1007/s10854-024-13140-z

2024-07-26

Journal of Materials Science Materials in Electronics

Abstract:This study investigates the performance of silicon nanoparticles (Si NPs) and silicon nanographite (SiNG) composite-based anodes for lithium-ion batteries (LiBs). Si offers a promising alternative to traditional graphite anodes due to its higher theoretical capacity, despite encountering challenges such as volume expansion, pulverization, and the formation of a solid electrolyte interface (SEI) during lithiation. SiNPs anode exhibited initial specific capacities of 1568.9 mAh/g, decreasing to 1137.6 mAh/g after 100th cycles, with stable Li–Si alloy phases and high Coulombic efficiency (100.48%). It also showed good rate capability, retaining 1191.3 mAh/g at 8400 mA g −1 (2.82C), attributed to its carbon matrix structure. EIS indicated charge transfer with R B of 3.9 Ω/cm −2 and R CT of 11.4 Ω/cm −2 . Contrastingly, SiNG composite anode had an initial capacity of 1780.7 mAh/g, decreasing to 1297.5 mAh/g after 100 cycles. Its composite structure provided cycling stability, with relatively stable capacities after 50 cycles. It exhibited good rate capability (1191.3 mAh/g at 8399.9 mA g −1 ), attributed to its carbon matrix structure. Electrochemical impedance spectroscopy showed higher resistances for R B of 4.2 Ω/cm −2 and R CT of 15.6 Ω/cm −2 compared to SiNPs anode. These findings suggest avenues for improving energy storage devices by selecting and designing suitable anode materials.

materials science, multidisciplinary,engineering, electrical & electronic,physics, applied, condensed matter
Optimising Hollow-Structured Silicon Nanoparticles for Lithium-Ion Batteries

Chenghao Yue,Yao Liu,Shaoliang Guan,Alireza Fereydooni,Yuexi Zeng,Zhijie Wei,Yonggang Wang,Yimin Chao

DOI: https://doi.org/10.3390/ma16175884

IF: 3.4

2023-08-29

Materials

Abstract:Silicon has been proven to be one of the most promising anode materials for the next generation of lithium-ion batteries for application in batteries, the Si anode should have high capacity and must be industrially scalable. In this study, we designed and synthesised a hollow structure to meet these requirements. All the processes were carried out without special equipment. The Si nanoparticles that are commercially available were used as the core sealed inside a TiO2 shell, with rationally designed void space between the particles and shell. The Si@TiO2 were characterised using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The optimised hollow-structured silicon nanoparticles, when used as the anode in a lithium-ion battery, exhibited a high reversible specific capacity over 630 mAhg−1, much higher than the 370 mAhg−1 from the commercial graphite anodes. This excellent electrochemical property of the nanoparticles could be attributed to their optimised phase and unique hollow nanostructure.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Rationally Designed Silicon Nanostructures As Anode Material for Lithium‐Ion Batteries

Tong Shen,Zhujun Yao,Xinhui Xia,Xiuli Wang,Chang-Sheng Gu,Jiangping Tu

DOI: https://doi.org/10.1002/adem.201700591

IF: 3.6

2017-01-01

Advanced Engineering Materials

Abstract:Silicon (Si) is promising for high capacity anodes in lithium‐ion batteries due to its high theoretical capacity, low working potential, and natural abundance. However, there are two main drawbacks that impede its further practical applications. One is the huge volume expansion generating during lithiation and delithiation progresses, which leads to severe structural pulverization and subsequently rapid capacity fading of the electrode. The other is the relatively low intrinsic electronic conductivity, therefore, seriously impacting the rate performance. In the past decades, numerous efforts have been devoted for improving the cycling stability and rate capability by rational designs of different nanostructures of Si materials and incorporations with some conductive agents. In this review, the authors summarize the exciting recent research works and focus on not only the synthesis techniques, but also the composition strategies of silicon nanostructures. The advantages and disadvantages of the nanostructures as well as the perspective of this research field are also discussed. We aim to give some reference for engineering application on Si anodes in lithium ion batteries.
Rationally Designed Silicon Nanostructures as Anode Material for Lithium-Ion Batteries

Tong Shen,Zhujun Yao,Xinhui Xia,Xiuli Wang,C.D. Gu,Jiangping Tu

DOI: https://doi.org/10.1002/adem.201700591

IF: 3.6

2018-01-01

Advanced Engineering Materials

Abstract:Silicon (Si) is promising for high capacity anodes in lithium-ion batteries due to its high theoretical capacity, low working potential, and natural abundance. However, there are two main drawbacks that impede its further practical applications. One is the huge volume expansion generating during lithiation and delithiation progresses, which leads to severe structural pulverization and subsequently rapid capacity fading of the electrode. The other is the relatively low intrinsic electronic conductivity, therefore, seriously impacting the rate performance. In the past decades, numerous efforts have been devoted for improving the cycling stability and rate capability by rational designs of different nanostructures of Si materials and incorporations with some conductive agents. In this review, the authors summarize the exciting recent research works and focus on not only the synthesis techniques, but also the composition strategies of silicon nanostructures. The advantages and disadvantages of the nanostructures as well as the perspective of this research field are also discussed. We aim to give some reference for engineering application on Si anodes in lithium ion batteries.
Nano-Si/C microsphere with hollow double spherical interlayer and submicron porous structure to enhance performance for lithium-ion battery anode

Hedong Chen,Shenggong He,Xianhua Hou,Shaofeng Wang,Fuming Chen,Haiqing Qin,Yingchun Xia,Guofu Zhou

DOI: https://doi.org/10.1016/j.electacta.2019.04.170

IF: 6.6

2019-07-01

Electrochimica Acta

Abstract:Silicon (Si) applied for lithium-ion battery anode is of immense prospect due to high theoretical capacity, non-toxic, abundant reserves and low-cost. But the electrode materials, maintaining stable structure during repeated discharge/charge processes, need to be explored, which can realize the long-life. To address this problem, we utilized hollow porous pollen carbon microsphere derived from biomass as hard template to accommodate nano-Si. The hollow porous carbon@nano-Si@graphene sheets (HPC@nano-Si@GS) microspheres with hollow double spherical interlayer and submicron porous structure have been successfully synthesized via a simple and green environment-protecting wet-chemical method. We decorate nano-Si with silane coupling agent which can bind hollow porous pollen and graphene oxide, realizing the strong fixation and protection of nano-Si. Furthermore, the surface submicron mesh pores and HPC microsphere provide enough buffer space to cushion the huge volume expansion for nano-Si, enhancing the cyclic stability. Finally, graphene wrapping on the surface of HPC@nano-Si@GS microspheres can protect nano-Si very well, further stabilizing the composite structure. Nano-Si particles were accommodated in the HPC microsphere with submicron pores and then coated by wrinkled graphene sheets, to form the strong structure with hollow double spherical interlayer. A series of electrochemical tests indicate that prepared HPC@nano-Si@GS microspheres with hollow porous carbon structure exhibit outstanding electrochemical properties.

electrochemistry
Silicon Nanoparticles Embedded in Chemical-Expanded Graphite through Electrostatic Attraction for High-Performance Lithium-Ion Batteries

Xu Liu,Huitian Liu,Yuhao Cao,Xiaochen Wu,Zhongqiang Shan

DOI: https://doi.org/10.1021/acsami.2c21866

2023-02-09

Abstract:Silicon (Si) is a promising next-generation anode for high-energy-density lithium-ion batteries. The application of silicon/carbon (Si/C) composites with high Si content is hindered by the huge volume change and insecure electrochemical interface of the Si anode. Herein, chemical-expanded graphite (CEG) is used as a carbon matrix to form Si@CEG/C composites with an embedded structure. CEG with an abundant pore structure and electropositivity can well disperse and accommodate a mass of Si nanoparticles (Si NPs). With the flexibility and porosity of CEG, the embedded structure of Si NPs fixed in an expanded graphite layer can adopt the volume change of Si NPs and offer the abundant path of diffusion of lithium-ion, which leads to a moderate cycle and rate performance. Si@CEG/C exhibits a high reversible capacity of 1232.4 mA h g-1 at a current density of 0.5 A g-1 and with a capacity retention rate of 87% after 200 cycles. This embedded structure of Si/C composites built by CEG is meaningful for the structure design of the Si-based anode with higher specific capacity, active material utilization, and satisfactory cycle stability.
CNTs-intertwined and N-doped porous carbon wrapped silicon anode for high performance lithium-ion batteries

Yiwei Qiu,Chenying Zhang,Chengkun Zhang,Qingshui Xie,Zhensong Qiao,Xiangzhe Zeng,Wanjie Xu,Hongfei Zheng,Shuai Li,Jie Lin,Dong-Liang Peng

DOI: https://doi.org/10.1016/j.jallcom.2021.160240

IF: 6.2

2021-10-01

Journal of Alloys and Compounds

Abstract:Silicon is evaluated as a competitive lithium-ion batteries anode material by virtue of its ultrahigh specific capacity and relatively low discharge potential. However, the large volume change during lithiation/delithiation processes, and the low intrinsic electric conductivity have seriously impeded its widespread practical application. Herein, silicon nanoparticles (SiNPs) coated with CNTs-intertwined N-doped porous carbon (NPC) are prepared via a facile solution-phase method, followed by thermal annealing treatment. In this hierarchical structure, the bimetallic ZIF-derived porous carbon can shorten the migration channels of Li+ and electrons. Moreover, the formed Co nanoparticles can not only catalyze the graphitization of carbon, but also propel in-situ growth of CNTs to constitute a 3D interconnected conductive network, thereby improving the electrochemical performance. Benefiting from the unique structure, the as-prepared 2/ electrode exhibits superior electrochemical performance of 1191 mAh g−1 at 0.5 A g−1 after 200 cycles. Meanwhile, the electrode also shows excellent rate capability of 930 mAh g−1 even at a high current density of 6 A g−1. This work provides a new strategy to design exceptionally high electrical conductivity and structure stability of Si-based anode materials.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
SiO 2 nanoparticles anchored on hollow porous carbon shells for high stability lithium-ion battery anodes

Xiaoyan Lan,Xinglan Zhou,Zipan Jiao,Haoran Zong,Peng Zhang,Benhua Xu,Yunsi Wang

DOI: https://doi.org/10.1016/j.jallcom.2023.172783

IF: 6.2

2023-11-12

Journal of Alloys and Compounds

Abstract:Silicon dioxide (SiO 2 ), an exceptionally promising anode material, has garnered significant attention owing to its cost-effectiveness, widely available, and high theoretical capacity for lithium-ion batteries. However, the long-term stability of this anode is hindered by its significant volume expansion and limited electrical conductivity, which hampers its commercialization. In this study, we employed a strategy utilizing ZIF-8 as a template to fabricate hollow porous carbon (HPC). Nanometer-sized SiO 2 particles were immobilized to the HPC shells and ultimately encapsulated within the carbon layer formed through high-temperature dopamine carbonization (PDA). This HPC@SiO 2 /C composite exhibits excellent long-cycle stability as the anode (capacity remains at 804 mA h g −1 after 500 cycles). The outstanding performance highlights its promising potential for real-world applications in the future.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering

Silicon Nanoparticles Coated with Nanoporous Carbon As a Promising Anode Material for Lithium Ion Batteries

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

Silicon-Based Materials As High Capacity Anodes for Next Generation Lithium Ion Batteries

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Carbon Dot-Modified Silicon Nanoparticles for Lithium-Ion Batteries

Cu 3 Si-Modified Silicon Nanoparticles Encapsulated within SiO x and Hollow Carbon for Lithium-Ion Battery Anodes

Effect of Surface Modification on Electrochemical Performance of Nano-Sized Si As an Anode Material for Li-ion Batteries

High-performance Self-Organized Si Nanocomposite Anode for Lithium-Ion Batteries

Silicon/Carbon Nanoparticles Assembled with Multifunction Carbon Nanotubes/Sheets as High-Performance Anode of Lithium-Ion Batteries

Silicon nanowires for Li-based battery anodes: a review

Silicon Nanoparticles Within the Carbonized SU-8 Cages As A Micro Lithium-Ion Battery Anode

Carbon-Coated Sio(2) Nanoparticles As Anode Material for Lithium Ion Batteries

Latest development of nanostructured Si/C materials for lithium anode studies and applications

Exploring silicon nanoparticles and nanographite-based anodes for lithium-ion batteries

Optimising Hollow-Structured Silicon Nanoparticles for Lithium-Ion Batteries

Rationally Designed Silicon Nanostructures As Anode Material for Lithium‐Ion Batteries

Rationally Designed Silicon Nanostructures as Anode Material for Lithium-Ion Batteries

Nano-Si/C microsphere with hollow double spherical interlayer and submicron porous structure to enhance performance for lithium-ion battery anode

Silicon Nanoparticles Embedded in Chemical-Expanded Graphite through Electrostatic Attraction for High-Performance Lithium-Ion Batteries

CNTs-intertwined and N-doped porous carbon wrapped silicon anode for high performance lithium-ion batteries

SiO 2 nanoparticles anchored on hollow porous carbon shells for high stability lithium-ion battery anodes