Abstract:A comprehensive CFD–DEM numerical model has been developed to simulate the biomass gasification process in a fluidized bed reactor. The methodology is based on an Eulerian–Lagrangian concept, which uses an Eulerian method for gas phase and a discrete element method (DEM) for particle phase. Each particle is individually tracked and associated with multiple physical (size, density, composition, and temperature) and thermo-chemical (reactive or inert) properties. Particle collisions, hydrodynamics of dense gas-particle flow in fluidized beds, turbulence, heat and mass transfer, radiation, particle shrinkage, pyrolysis, and homogeneous and heterogeneous chemical reactions are all considered during biomass gasification with steam. A sensitivity analysis is performed to test the integrated model׳s response to variations in three different operating parameters (reactor temperature, steam/biomass mass ratio, and biomass injection position). Simulation results are analyzed both qualitatively and quantitatively in terms of particle flow pattern, particle mixing and entrainment, bed pressure drop, product gas composition, and carbon conversion. Results show that higher temperatures are favorable for the products in endothermic reactions (e.g. H2 and CO). With the increase of steam/biomass mass ratio, H2 and CO2 concentrations increase while CO concentration decreases. The carbon conversion decreases as the height of injection point increases owing to both an increase of solid entrainment and a decrease of particle residence time and particle temperature. Meanwhile, the calculated results compare well with the experimental data available in the literature. This indicates that the proposed CFD–DEM model and simulations are successful and it can play an important role in the multi-scale modeling of biomass gasification or combustion in fluidized bed reactor.

Insights in Steam Reforming of Glycerol in a Fluidized Bed by Computational Fluid Dynamics Modeling

The Hydrodynamics of Low-Density Particles and Optimization of the EMMS Calculation Process

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Steam reforming of biodiesel by-product to make renewable hydrogen

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

Analysis of dry reforming of methane under different fluidization regimes using a multiphase particle-in-cell approach

A review of steam reforming of glycerol

Simulation of Supercritical Water Gasification Reaction of Glycerol and Reactor Structure Study

Impact of the Reactor Structure on Biomass Pyrolysis in Fluidized-Bed Reactors: A Coarse-Grained CFD-DEM Study

Simulation of Biomass-Steam Gasification in Fluidized Bed Reactors: Model Setup, Comparisons and Preliminary Predictions

Numerical Analysis of Biomass Gasification in a Fluidized Bed Reactor Using a Computational Fluid Dynamics Model Integrated with Reduced-Order Reaction Kinetics

Impact of Operating Parameters on Biomass Gasification in a Fluidized Bed Reactor: an Eulerian-Lagrangian Approach

CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor

Eulerian-Lagrangian simulation study of the gas-solid reacting flow in a bubbling fluidized coal gasifier

CFD optimization of continuous stirred-tank (CSTR) reactor for biohydrogen production

Optimization of methane catalytic decomposition in a fluidized bed reactor: A computational approach

Modeling an Industrial Hydrochlorination of Glycerol – A Systematic Study of Basic Reactor Types

Interface-resolved direct numerical simulations of interphase momentum, heat, and mass transfer in supercritical water gasification of coal

Steam gasification of biomass in dual fluidized bed gasifiers: A review