Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Accurate Prediction of Leakage Flux Boundaries for an Axial-Flux MEMS Micromotor Design

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Magnetic Circuit Modeling of Dual-Armature Flux-Switching Permanent Magnet Machine

Design and Fem Analysis of A High Efficiency Axial-Flux Brushless Dc Motor for Flywheel System

Calculation of Leakage Permeance in a Surface-Mounted Permanent Magnet Machine

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM

Investigation of the leakage in the flow distribution pair of radial piston hydraulic motors through CFD analysis and experiments

Prediction Error Analysis of Finite-Control-Set Model Predictive Current Control for IPMSMs

Open-Circuit Field Prediction of Interior Permanent-Magnet Motor Using Hybrid Field Model Accounting for Saturation

Modeling of an electrostatic micromotor based on a levitated rotor

Flux-Leakage Design Principle and Multiple-Operating Conditions Modeling of Flux Leakage Controllable PM Machine Considering Driving Cycles

Flux-Weakening Capability Enhancement Design and Optimization of a Controllable Leakage Flux Multilayer Barrier PM Motor

Design and Simulation of an Active Electrostatic Bearing for MEMS Micromotors

Prediction of Electromagnetic Performance for IPMSM Based on Improved Analytical Model Considering Saturation Effects

Magnetic Equivalent Circuit Model for a Two Degree-of-Freedom Rotary-Linear Machine with Transverse Flux Structure

Low vibration design of a variable leakage flux PM motor considering multiple operating conditions

Analytical prediction of electromagnetic performance for surface-embedded permanent magnet in-wheel machines considering iron's nonlinearity

Rapid Design of Structural Parameters of Axial-flux Micro-motor Based on Deep Learning

A Novel Quasi-3D Analytical Model for Axial Flux Motors Considering Magnetic Saturation