Abstract:In order to achieve wide speed-range operation in traction applications, an investigation of a permanent magnet (PM) flux-modulated motor with a mechanical flux-weakening solution is presented in this article. This PM flux-modulated motor consists of two sets of windings, i.e., windings I and II, and two rotors, i.e., the outer rotor and the inner rotor. The two sets of windings are connected in series. By adjusting the inner rotor position, the phase angle between the two voltage vectors of windings I and II is accordingly changed. Hence, with the speed increasing, even though the magnitudes of the two voltage vectors of windings I and II are increased, the voltage magnitude of the total series-connected windings can be maintained (instead of increased) within the voltage limit. As a result, a mechanical flux-weakening solution for wide speed-range operation is achieved. Differing from conventional electrical flux-weakening solutions, this mechanical solution shows the advantage that the flux-weakening capability is not heavily dependent on the power rating of the motor. A comparative study is conducted between the presented PM flux-modulated motor with the mechanical solution and a conventional interior PM synchronous motor (IPMSM) as well as a surface-mounted PM synchronous motor (SPMSM) with the electrical solution. The results indicate that compared to the IPMSM and SPMSM, the presented PM flux-modulated motor exhibits the advantages of high torque/power density, high torque per PM volume, and high flux-weakening capability. Finally, a prototype of the presented PM flux-modulated motor is fabricated, and experimental validation of the mechanical flux-weakening solution is provided.

Low vibration design of a variable leakage flux PM motor considering multiple operating conditions

Comparison of Optimal Design and Performance of PM Machines Having Non-Overlapping Windings and Different Rotor Topologies

Design and analysis of a hybrid permanent magnet variable leakage flux motor for low core loss and wide speed range

Flux-Weakening Capability Enhancement Design and Optimization of a Controllable Leakage Flux Multilayer Barrier PM Motor

Design of a Chamfered Structure on Consequent-Pole Vernier Permanent-Magnet Machine

Design and analysis of multiple flux barriers in a leakage-flux-controllable permanent magnet machine for torque enhancement

Low Vibration and Noise Design of Integrated Permanent Magnet Synchronous Motor (PMSM)

Design and Performance Investigation of Novel Linear Switched Flux PM Machines

Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

Vibration and Noise Optimization of Variable-Frequency-Driven SPMSM Used in Compressor Based on Electromagnetic Analysis and Modal Characteristics

Multi-Objective Optimal Design of High-Speed Surface-Mounted Permanent Magnet Synchronous Motor for Magnetically Levitated Flywheel Energy Storage System

Design and optimization of reverse salient permanent magnet synchronous motor based on controllable leakage flux

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Researches on Behavior of Vibration in Axial Flux Permanent Magnet Synchronous Motor

Analysis of a Novel Double-Sided Yokeless Multitooth Linear Switched-Flux PM Motor

Optimization Design of Power Factor for an In-Wheel Vernier PM Machine From the Perspective of Air-Gap Harmonic Modulation

Investigation of a PM Flux-Modulated Motor With Mechanical Flux-Weakening Solution for Wide Speed-Range Operation in Traction Applications

Design and Investigation of Flux-Reversal Permanent-Magnet Motor with Less Rare-Earth Magnet for Low-Cost Application

Vibration Reduction Characteristics of Permanent Magnet DC Motors With Sawtooth Edge Poles

Flux-Leakage Design Principle and Multiple-Operating Conditions Modeling of Flux Leakage Controllable PM Machine Considering Driving Cycles

Low electromagnetic vibration design of double-layer interior permanent magnet machines for electric vehicle