Abstract:The biological hierarchical porous structures have excellent properties that are unmatched by artificial fabrication and have great potential for applications in catalysis, adsorption, energy and biomedicine. However, the traditional fabrication methods are difficult to mimic finely hierarchical porous structures and involve complex solution handling and residues. 3D printing is limited by materials and resolution, making it difficult to achieve microporous preparation. Herein, an in situ foaming fusion deposition modeling (FDM) technology using environmentally friendly CO2 as blowing agent to fabricate polyetherimide bionic hierarchical porous structures is applied. The macroscopic pores are obtained by 3D design, while the microporous structure is regulated by changing foaming parameters such as saturation pressure, desorption time, and nozzle temperature. The cell size of the microextruded fibers by FDM nozzle vary from 1.3 to 5.3 μm and the cell density vary from 7.3 × 108 to 1.0 × 1010 cell cm−3 with the change of parameters. In addition, the deposited hierarchical porous scaffold with density of 0.89 g cm−3 possess a compressive strength of 78.9 MPa at 15% strain and a compressive modulus of 1454.3 MPa, which exhibits comparable mechanical property with that of bone. The polyetherimide bionic porous structures are fabricated via an in situ foaming fusion deposition modeling process. The parts has 3D printing large pores and foaming micropores, and the cell structure can be adjusted by changing printing and foaming parameters, which has a wide range of bionic application potential. It also has excellent mechanical properties such as high compression strength and modulus.

Porous Structure Fabrication Using A Stereolithography-Based Sugar Foaming Method

Additive manufacturing of interconnected hierarchically porous zirconia: Utilizing both microspherical and filamentary pore-forming agents via direct ink printing

Fabrication Process and Properties of Porous Polyamide Produced by Selective Laser Sintering

Carbon Scaffold with Controllable Small Pore Structure Based on Mask Projection Stereolithography

Microfabrication of 3D-Polymeric Structures Using Soft Lithography for Tissue Engineering

A Versatile In Situ Precipitation Assisted Direct-Write-3D Printing Strategy for Skinless Hierarchical Porous Polymeric Scaffolds

Fabrication of 3D-Printed Biodegradable Porous Scaffolds Combining Multi-Material Fused Deposition Modeling and Supercritical CO2 Techniques

Fabrication of porous substrates: A review of processes using pore forming agents in the biomaterial field

Physical modification of the interior surfaces of PLGA porous scaffolds using sugar fibers as template.

An Inorganic Water‐Glass‐Based Hydrogel for Processing Hierarchically Porous 3D Structures by Combined Robocasting and Direct Foaming

Polylactide scaffold fabrication using a novel combination technique of fused deposition modeling and batch foaming: dimensional accuracy and structural properties

Construction of Bionic Porous Polyetherimide Structure by an In Situ Foaming Fused Deposition Modeling Process

Fabrication Method for Structured Porous Polydimethylsiloxane (PDMS)

Robocasting of highly porous ceramics scaffolds with hierarchized porosity

Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique

Fabrication of porous scaffolds using NaHCO3 particulates as the porogen material

A green extrusion-based 3D printing of hierarchically porous aluminum

A Review of the Preparation of Porous Fibers and Porous Parts by a Novel Micro-Extrusion Foaming Technique

Fabrication of porous aluminum ceramics beyond device resolution via stereolithography 3D printing

A method for solvent-free fabrication of porous polymer using solid-state foaming and ultrasound for tissue engineering applications

Preparation of Highly Porous Interconnected Poly(Lactic Acid) Scaffolds Based on A Novel Dynamic Elongational Flow Procedure