Abstract:Thermal, mechanical and tribological properties of carbon fabric/resin laminated composites containing carbon fiber powder with different densities. Carbon fabric/resin laminated composites (CFRC) are extensively used in aerospace, transportation, and other fields owing to their superiorities of lightweight, high strength, and convenient integral molding. Therefore, strong interlaminar binding and prominent wear resistance are urgent requirements for avoiding premature failure of laminated materials in harsh working environments. To elevate the superficial wear resistance and interlaminar bonding strength of composites simultaneously, the modified composites were obtained by introducing carbon fiber powder (CFP) with different densities on the surface of the composites and between layers. The experimental results indicate that CFP can be evenly distributed in the interlaminar resin enrichment zone of the sample (CFRC‐40) when the deposition density is 40 g/m2. Consequently, CFRC‐40 presents optimal thermal conductivity owing to better heat transfer bridges between layers of the composite established by CFP. At the same time, the mechanical properties such as the tensile, impact, and interlaminar shear strengths of CFRC‐40 are improved by 42.8%, 10.2%, and 8.5%, respectively, compared with the original CFRC, which are attributed to the absorption of crack propagation energy and the inhibition of crack propagation by CFP. Furthermore, the dynamic friction coefficient maintains at a high level after introducing CFP with a density of 40 g/m2, while the wear rate significantly decreases by 61.2% from 12.99 × 10−14 m3(N m)−1 to 5.04 × 10−14 m3(N m)−1. This study proposes an innovative strategy to improve the interlaminar bonding of carbon fabric/resin laminated composite, which is conducive to obtaining composite with excellent mechanical and tribological properties. Highlights A facile and effectual method was adopted to introduce carbon fiber powder (CFP) into the interlamination and surface of the composites simultaneously. The mechanical properties and abrasive resistance of the composites were obviously strengthened by regulating the content and distribution of CFP. CFP at a certain scale, could not only hinder the propagation of cracks but also alleviate the surface wear and extend the service life of composites.

Effects of Joint Processes of Clvd and Pip on the Microstructure and Mechanical Properties of C/C-Zrc Composites

Effect of Ø 0.11 Mm Z-pinning on the Properties of Composite Laminates Via an Ultrasound Guided Insertion Process

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routes

Effect of microstructure evaluation during the PIP process on macroscopic properties of C/C composites

The Effect of PyC/SiC Compound Interphase on the Properties of PIP SiC/SiC Composite

In situ consolidation process-based fabrication and interlaminar modification mechanism associated with CF/PEEK multiscale nanocomposites characterized by interlaminar doping of CNTs

Effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of high volume fraction SiC/Al composites prepared by a novel hybrid additive manufacturing

Experimental Investigation of Z-pin Insertion Angles on the Mechanical Behavior and Failure Mechanism of Compression after Impact for CFRP Laminates

Effects of multilayer hydrothermal carbon interphases on mechanical properties and thermal shock resistance of CF/ZrB 2 -SiCBN

Effects of preform structure on microstructure and mechanical properties of long/short fiber‐coupled C/C–SiC composites

The oxide-layer configuration alteration and pseudo-ductile crack propagation mechanisms in composites induced by different relative thicknesses of CVI HfC-SiC multiphase matrix

Effect of carbon matrix on mechanical and tribological properties of Cf/Cu/C composites

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder

Microstructure and mechanical properties of 3D Cf/SiBCN composites fabricated by polymer infiltration and pyrolysis

Balance Interlaminar Improvement and In-Plane Adverse Impact of Hexagonal Semi-Embedded Fine Z-pin Reinforced Polymer Composite

Influence of Z‐pin material on the mechanical properties of fine Z‐pin reinforced composites

Mechanical properties of all-C/C composite hybrid bonded/bolted joints

Construction of sandwich-structured C/C-SiC and C/C-SiC-ZrC composites with good mechanical and anti-ablation properties