Abstract:Refractory multi-principle element alloys (RMPEAs) represent a promising class of high-temperature structural materials due to their excellent high-temperature mechanical properties. An important challenge in the application of RMPEAs is achieving a suitable balance between high strength and ambient ductility. Previous investigations have suggested that vanadium (V) element plays a key role in maintaining the high strength and ductility of RMPEAs. Nevertheless, the fundamental mechanisms by which V influences the strength and ductility of RMPEAs remain unclear. To address this issue, a series of HfNbTaTiVx (x = 0.00-1.00) alloys were designed to investigate the effects of V content on the microstructural and mechanical properties of RMPEAs. The results demonstrate that the prepared HfNbTaTiVx alloys are single-phase body -centered cubic (BCC) solid solutions. V addition helps to improve the tensile yield strength of the alloys while concurrently preserving their ductility. The tensile yield strength increases from 729 MPa (x = 0.00) to 997 MPa (x = 1.00) with the increase of V. Impressively, the HfNbTaTiV0.25 alloy exhibits a tensile fracture plastic strain of 21.9%, which surpasses most existing RMPEAs. The increase in yield strength mainly comes from the intensification of local lattice distortion and solid solution strengthening caused by the introduction of V. Furthermore, the addition of V helps to decrease the elastic anisotropy of the alloys, which is advantageous for their processing quality. Overall, this study not only elucidates the role of V in conferring strength and ductility to RMPEAs but also provides valuable insights for the development and industrial application of RMPEAs.

Effect Of Transition Metal Impurities On The Strength Of Grain Boundaries In Vanadium

Atomic Investigation of Alloying Cr, Ti, Y Additions in a Grain Boundary of Vanadium

Effect of helium and vacancies in a vanadium grain boundary by first-principles

Effect of Ti/Cr Additive on Helium Diffusion and Segregation in Dilute Vanadium Alloys

The effects of Vanadium on the strength of a bcc Fe Σ3(111)[1-10] grain boundary

Effects of vanadium content on the microstructure and tensile properties of NbTiV x Zr high-entropy alloys

The Effects of 3d Alloying Elements on Grain Boundary Cohesion in -Iron: a First Principles Study on Interface Embrittlement Due to the Segregation

Effect of vanadium element on the microstructure and mechanical properties of Cu-3.2Ti-0.2Fe alloys

Effect of alloy element on hydrogen-induced grain boundary embrittlement in BCC iron

Effect Of Alloying Additions On The Hydrogen-Induced Grain Boundary Embrittlement In Iron

Electronic Effects Of Alloying Elements Nb And V On Body-Centred-Cubic Fe Grain Boundary Cohesion

First-Principles Investigation Of The Effect Of Alloying Elements Ti, V On Grain Boundary Cohesion Of Fccfe

The influence of transition metal solutes on dislocation core structure and values of Peierls stress and barrier in tungsten

Effects of Cr, Mn on the Cohesion of the Γ-Iron Grain Boundary

Effects of V on the Microstructure and Mechanical Properties of HfNbTaTiVx Refractory Multi-Principle Element Alloys: A Combined Experimental and Computational Study

Effects of Vanadium Microalloying and Intercritical Annealing on Yield Strength–Ductility Trade-Offs of Medium-Manganese Steels

Atomistic investigation of effect of alloying on mechanical properties and microstructural evolution of ternary FeCo-X (X = V, Nb, Mo, W)

Effect of vanadium element on the continuous precipitation behavior of Cu–3.2Ti–0.2Fe alloys

Effect of solutes on the performance of Zn-coating and Zn-inducing transgranular cracking in steel based on DFT calculations

Atomistic Study on Defect–Grain Boundary Interactions in TiVTa Concentrated Solid–Solution Alloys

Combined effects of nonmetallic impurities and planned metallic dopants on grain boundary energy and strength