Abstract:Sulfonated poly(ether ether ketone) (SPEEK) and aminopropyltriethoxysilane (KH550) hybrid membranes doped with different weight ratio of phosphotungstic acid (PWA) were prepared by the casting procedure, as well as PWA as a catalyst for sol–gel process of KH550. The chemical structures of hybrid membranes were characterized by energy dispersive X-ray spectrometry (EDX) and Fourier transform infrared spectroscopy (FTIR). The morphology of hybrid membranes was investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results had proved the uniform and homogeneous distribution of KH550 and PWA in these hybrid membranes. The influence of the dispersed PWA on the properties of membranes such as thermal stability, water uptake, swelling ratio, and proton conductivity was researched. Thermogravimetry analysis (TGA) results indicated that the hybrid membranes had high thermal stability below 200 °C. The dimensional stabilities of the hybrid membranes were improved by addition of KH550-10/PWA compared with the pristine SPEEK. The proton conductivity of the hybrid membrane with 5 wt.% PWA into SPEEK/KH550-10 reached the maximum of 0.084 S cm−1 at 25 °C and 0.16 S cm−1 at 80 °C under the 100% relative humidity condition. The proton conductivity mechanism in the hybrid membranes was discussed. Therefore, the possibility of the hybrid membranes for usage in proton exchange membrane fuel cells (PEMFCs) was explored.

Pw9v3/Rgo/Speek Hybrid Material: an Excellent Proton Conductor

A Novel Speek/Pw11v/Rgo Hybrid Film for Proton Conduction

PW<sub>9</sub>V<sub>3</sub>/rGO/SPEEK hybrid material: an excellent proton conductor

Synthesis and Structure of a Proton-Conductive Supramolecular Complex Based on Poly-Keggin-anion Chains

Hybrid Electrolyte SiW 9 MoV 2 /rgo/speek for Solid Supercapacitors with Enhanced Conductive Performance

Highly Proton-conducting Hybrid Materials Containing Keggintype Tungstovanadophosphoric Acids and Organic Polymers

High Performance Proton-Conducting Composite Based on Vanadium-Substituted Dawson-type Heteropoly Acid for Proton Exchange Membranes

The Preparation of Metal–Organic‐Framework/Boron Phosphate Hybrid Materials for Improved Performances in Proton Exchange Membranes

Polyoxometalate‐Modified Sponge‐Like Graphene Oxide Monolith with High Proton‐Conducting Performance

Two-dimensional metal-organic framework-graphene oxide hybrid nanocomposite proton exchange membranes with enhanced proton conduction

Enhanced proton conductivity of sulfonated poly(ether ether ketone) membranes by constructing cation‐π through doping ammonium ionic liquid and graphene oxide

Preparation and Conductivity of Organic-Tungstovanadophosphoric Acid Hybrid Materials

A Novel Polybenzimidazole Composite Modified by Sulfonated Graphene Oxide for High Temperature Proton Exchange Membrane Fuel Cells in Anhydrous Atmosphere

Polydopamine-coated polyimide nanofiber to anchor HPW and construct the pocket-like composite membrane with excellent proton conductivity and stability

Preparation and electrochemical performance of hybrid materials containing heteropoly acid with Dawson structure and polymers

A Maximization of the Proton Conductivity of Sulfonated Poly(Ether Ether Ketone) with Grafted Segments Containing Multiple, Flexible Propanesulfonic Acid Groups

Preparation and Electrochemical Performance of Tungstovanadophosphoric Heteropoly Acid and Its Hybrid Materials

High proton conductivity of sulfonate‐amine ionic HOFs and enhancement of SPEEK composite membranes

Sulfonated poly(ether ether ketone)/aminopropyltriethoxysilane/phosphotungstic acid hybrid membranes with non-covalent bond: Characterization, thermal stability, and proton conductivity

Preparation and Conductivity Study of Hybrid High Proton Conductor Materials Composited with Octadecatungstodiphosphoric Heteropoly Acid with Dawson Structure

Scalable synthesis of pyrazine-linked conjugated microporous polymers for high-performance proton conduction