Abstract:The intricate multiphysics coupling conditions and nonlinear characteristics inherent in carbon fiber composite induction welding render the temperature transfer properties of the interface and the fusion connection mechanism across different scales ambiguous. In this study, a transient 3D finite element model was developed to simulate the induction welding process of carbon fiber reinforced polyphenylene sulfide (CF/PPS) composites, utilizing an electromagnetic-thermal multiphysics coupling mechanism. This investigation revealed that the electromagnetic effect leads to the accumulation of magnetic flux and spatial constraints, thereby triggering an eddy current concentration effect at the interface, which serves as an additional influencing factor in induction welding's edge effect. Simultaneously, the temperature distribution at the induction welding interface exhibits a gradient characteristic over both time and space: fluctuations in the current heat source result in a pronounced gradient distribution pattern of 225 %-680 % in welding interface temperature differences, accompanied by a 43.29 % reduction in shear strength. Notably, this study delves into the intricate origin of the induction welding heat source, elucidating that the generation of induced current in the magnetic field by carbon fiber overlap contributes to volumetric heat induction. This facilitates the welding process to some extent, despite the significantly lower heat contribution compared to thermally conductive wire meshes. In conclusion, to gain deeper insights into the impact of heat input on the fusion behavior of the bonding interface, SEM analysis was conducted on the experimental samples to examine the fusion morphology of the induction welding interface. Additionally, the method of EDS elemental analysis has also been used to investigate the generation and fusion mechanisms of welding defects. The amalgamation of numerical simulation technology and multi-scale material characterization serves as a methodological guide for researching the welding mechanisms of composite materials and even extends to investigations within the domain of metal connections. Furthermore, it paves the way for exploring a multidimensional research horizon in the realm of material joining and molding.

Study on the Influence of Fusion Ratio on Carbon Migration Phenomenon in the Narrow Gap Welding of Dissimilar Steels

Influence of Fusion Ratio on Carbon Migration Phenomenon in the Narrow Gap Welding of Dissimilar Metals in 9% Chromium Steels

Research on annealing process for welded joint of the dissimilar steel——weld property and holding time

Carbon diffusion in dissimilar joints between P91 and 12Cr1MoV steels welded by different consumables at high temperature

Evolution mechanism of interfacial microstructure and its effect on failure in dissimilar metal welds containing ferritic heat resistant steels

Influence of Carbon Migration on the Toughness of Heat Affected Zone of 9%cr+2.25%cr Dissimilar Welds at High Temperature

Effects of resistance spot welding parameters on microstructure and mechanical properties of the dissimilar welded joint of quenching and partitioning steels

Effect of microstructure heterogeneity on the mechanical properties of friction stir welded reduced activation ferritic/martensitic steel

Influence of Metal Transfer Modes on Pore Formation during the Welding Process of AA6082/A360 Dissimilar Aluminum Alloys

Welding Effect at the Heat Affected Zone by Joining a Gray Cast Iron with Stainless Steel E308-16

Inhomogeneity of microstructure and mechanical properties in the interlayer regions for narrow gap laser wire filling welding of 316L stainless steel

Influence of the Cr Gradient in the Transition Layer on the Creep Rupture Properties of Dissimilar Joints

Influence of arc energy on the microstructure and corrosion behavior of ER2209 duplex stainless steel deposited on Q345B low-alloy steel by GMAW

Study on the Microstructure and Mechanical Properties on Al/Carbon Fiber Reinforced Thermoplastic Dissimilar Friction Stir Lap Welding Joints

Effect of welding layers and interlayer temperature on welding residual stress and deformation of Q345/316L dissimilar steel

Microstructure Evolution and Mechanical Properties of Laser Welded Dissimilar/Similar Joints Between Medium‐Mn Transformation‐Induced Plasticity Steel and DP980/22MnB5 Steels

Segregation in Fusion Weld of 2219 Aluminum Alloy and Its Influence on Mechanical Properties of Weld

Influence of Element Segregation at Grain Boundary of Heat Affected Zone on Low-cycle Fatigue Property of Weldment

Temporal spatial transfer characteristics and cross-scale fusion behavior mechanism of interface temperature in induction welding of plain carbon fiber polyphenylene sulfide

Effect of welding parameters on microstructure and mechanical properties of dissimilar AISI 304/ductile cast iron fusion welded joints

Modeling of welding residual stress in a dissimilar metal butt-welded joint between P92 ferritic steel and SUS304 austenitic stainless steel